Ab initio study of the NMR shielding constants and spin-spin coupling constants in cyclopropene

Summary Ab initio calculations of parameters which characterize the NMR spectrum are presented for the cyclopropene molecule. The London orbitals CHF (or GIAO-CHF, Gauge-Independent Atomic Orbital Coupled Hartree-Fock) results for the shielding constants are in good agreement with the experimental data, accurately determined, and with otherab initio values. The calculations of the NMR spin-spin coupling constants have been performed using the Multiconfiguration Time-Dependent Hartree-Fock (MC TDHF) approach. Different basis sets and MC SCF wavefunctions were used to estimate the accuracy of the results. Good agreement is obtained with the coupling constants estimated using the available experimental data.Dedicated to Professor Werner Kutzelnigg on the occasion of his 60th birthday     

9-acetoxyanthracene derivatives. Part VIII. The mechanism of degradation of 9-acetoxy-10-arylanthracenes to anthraquinone

The mechanism of degradation of 9-acetoxy-10-arylanthracenes to anthraquinose with the use of HNO₃ in AcOH has been reported. This was proved by way of example on 9-acetoxy-10-(4′-acetoxyphenyl )anthracene (1) by means of separation and identification of intermediate products $\text{2}$, $\text{3}$ and $\text{4}$.     

Structural assignment of organotin hydrides containing the oxazoline ligand

A series of triorganotin hydrides and diorganotin dihydrides containing the optically active 2-(4-isopropyl-2-oxazolinyl)-5-phenyl ligand have been characterized by means of the multinuclear low-temperature NMR investigations, the results of which are discussed. In the corresponding organotin hydrides values of the ¹J(¹H-^117/119Sn) couplings appeared to be temperature dependent, supporting an axial/equatorial position of the hydrogen attached to the tin.     

High mobility of dithiophene-tetrathiafulvalene single-crystal organic field effect transistors

Single-crystal field effect transistors of the organic semiconductor dithiophene-tetrathiafulvalene (DT-TTF) were prepared by drop casting. Long, thin crystals connected two microfabricated gold electrodes, and a silicon substrate was used as a back gate. The highest hole mobility observed was 1.4 cm2/Vs, which is the highest reported for an organic semiconductor not based on pentacene. A high ON/OFF ratio of at least 7 x 105 was obtained for this device.     

Synthesis and characterization of metal polycarboxylates constructed from lanthanides(iii) and 1,2,4,5-benzenetetracarboxylic acid

The complexes of yttrium(III) and lanthanides(III) with 1,2,4,5-benzenetetracarboxylic acid were prepared as crystalline solids of the general formula Ln₄(C₁₀H₂O₈)₃⋅14H₂O. They are insoluble in water. On heating in air or inert gas atmosphere all compounds lose water molecules; next anhydrous compounds decompose to oxides. The yttrium complex and heavy lanthanide (from Ho to Lu) ones crystallize in monoclinic crystal system. The dehydration does not change the crystal structure of the compounds.     

Effect of the fibre-forming material structure and silica nanoparticles

The paper discusses the thermal properties of alginate fibres made from alginic acid or sodium alginate and from alginates substituted with divalent metal ions during the fibre-forming stage. Alginate fibres with an addition of silica nanoparticles have also been examined. The selection of fibre-forming parameters was intended to obtain the best either sorption or strength properties depending on the specific fibre application. Thermal curves of the fibres under investigations obtained by under air atmosphere and differential scanning calorimetry (DSC) under neutral gas atmosphere have been interpreted from the view of physical and chemical changes in the fibre-forming material. Based on thermogravimetric curves, the fibre thermal stability indices have been determined. It has been found that the addition of silica nanoparticles exerts a positive influence on the thermal properties of the examined fibres.     

Complex formation of isocytosine tautomers with PdII and PtII

Isocytosine (ICH) exists in solution as two major tautomers, the keto form with N1 carrying a proton (1a) and the keto form with N3 being protonated (1b). In water, 1a and 1b exist in equilibrium with almost equal amounts of both forms present. Reactions with a series of Pd(II) and Pt(II) am(m)ine species such as (dien)Pd(II), (dien)Pt(II), and trans-(NH(3))(2)Pt(II) reveal, however, a distinct preference of these metals for the N3 site, as determined by (1)H NMR spectroscopy. Individual species have been identified by the pD dependence of the ICH resonances. pK(a) values (calculated for H(2)O) for deprotonation of the individual tautomers complexes are 6.5 and 6.4 for the N3 linkage isomers of dienPd(II) and dienPt(II), respectively, as well as 6.2 and 6.0 for the N1 linkage isomers. The dimetalated species [(dienM)(2)(IC-N1,N3)](3+) (M = Pd(II) or Pt(II)) are insensitive over a wide range of pD. The crystal structure analysis of [(dien)Pd(ICH-N3)](NO(3))(2) is reported. Ab initio calculations have been performed for tautomer compounds of composition [(NH(3))(3)Pt(ICH)](2+), cis- and trans-[(NH(3))(2)PtCl(ICH)](+), as well as trans-[(NH(3))(2)Pt(ICH)(2)](2+). Without exception, N3 linkage isomers are more stable, in agreement with experimental findings. As to the reasons for this binding preference, an NBO (natural bond orbital) analysis for [(NH(3))(3)Pt(ICH-N3)](2+)strongly suggests that intramolecular hydrogen bonding between trans-positioned NH(3) ligands and the two exocyclic groups of the ICH is of prime importance. The calculations furthermore show a marked pyramidalization of the NH(2) group of ICH in the complex once the heterocyclic ligand forms a dihedral angle <90 degrees with the Pt coordination plane.     

Photogeneration and quenching of reactive oxygen species by urocanic acid

Urocanic acid, UCA, is characterized by two electronic transitions in the UV-B (280-320 nm) which comprise its broad absorption spectrum and give rise to wavelength-dependent isomerization quantum yields. The absorption spectrum of UCA extends into the UV-A (320-400 nm). Given the UV-A component of sunlight is significantly greater than the UV-B component it is hypothesized even weak UV-A photochemistry of UCA could be important for in vivo responses to UV radiation. Degenerate pump-probe experiments performed on t-UCA at several wavelengths in the UV-A reveal an excited-state absorption that undergoes a rapid, approximately 1 ps decay. Photoacoustic experiments performed on both the cis and trans isomers reveal the formation of a long-lived intermediate following UV-A excitation. The efficiency and action spectra for this latter photoactive process are presented and are similar for both isomers of UCA. Cholesterol hydroperoxide assays designed to investigate the nature of the UV-A photoreactivity of t-UCA confirm the production of reactive oxygen species. The bimolecular rate constant for the quenching of singlet oxygen by t-UCA is determined to be 3.5 x 10(6) M(-1) s(-1). Taking into consideration recent theoretical calculations and jet expansion studies of the electronic structure of gas-phase t-UCA, a model is proposed to explain the isomerization and photoreactivity of t-UCA in solution over the UV-A region.     

Analysis of the effect of the electronic structure of the Cl atom in complexes of chlorides of group IV elements on Cl NQR frequency and asymmetry parameter

Analysis of changes in ³⁵Cl NQR frequency of complexes MCl₄.L and MCl₄.2L for M = Si, Ge, Sn and Ti was performed. The population of the atomic orbitals was calculated by the quantum chemistry methods PM3 and INDO. The results provided an explanation of the changes in ³⁵Cl NQR frequency and the asymmetry parameter upon complex formation. In the complexes of non-transition elements, a decrease in ³⁵Cl NQR frequency is first of all related to increasing population of p_z orbitals on Cl atoms. In the complexes of Ti, the increase in ³⁵Cl NQR frequency depends on a decrease in the p_π to d_π electron density transfer.     

Hydride generation atomic absorption spectrometry with insitu graphite tube trapping for the determination of Se (IV) and Se (VI) in baltic sea water samples

This paper reports the results of an optimisation study for a procedure to determine the total selenium and its inorganic species, Se(IV) and Se(VI) using atomic absorption spectrometry combined with hydride generation and in-situ trapping of the analyte on the inner walls of the graphite tube. With the use of the proposed modification, a detection limit (3σ) of 0.018 ng/ml is achieved. This paper presents exemplary results, according to the proposed procedure, for selenium determination in samples of marine water. The concentrations of selenium in the samples ranged from <0.02 ng/ml to 0.16ng/ml of Se(IV) and from <0.02 ng/ml to 0.10 ng/ml of Se(VI).