Capillary electrophoretic separation of serum proteins of workers occupationally exposed to heavy metals

Metallurgy processes are associated with many hazardous and toxic factors, including heavy metals. Exposure to heavy metals can cause damage to different organs, which can be observed through variation in the concentration of proteins in serum. The aim of this study was to evaluate the changes in a serum protein profile of copper smelters exposed to As, Cd and Pb ions, and xenobiotics present in tobacco smoke. A 2.3-fold higher Pb concentration in the blood and a 2.8-fold greater As concentration have been observed in the urine of non-smoking smelters compared to a control group. In the blood of smoking smelters, Cd concentration was 2-fold higher than in non-smoking ones. Serum proteins were separated by capillary electrophoresis, and in the group of non-smoking smelters, a higher amount of α₁-globulins was observed. In the group of smoking smelters, fewer α₁-globulins were noted. Furthermore, a greater amount of α₂-globulins in the serum of smoking and non-smoking workers in relation to the control group was revealed. A positive correlation between the concentration of Cd in the blood and the content of a fraction containing α₁- and α₂-globulins was revealed. Urine Cd concentration was found to be negatively associated with the α₁- and α₂-globulins fraction. Observed abnormalities in the proteins profiles of smelters can be important markers when assessing exposure to heavy metals and in the early diagnosis of diseases caused by them.     

New Heterocyclic Analogues of Anthracycline Antibiotics

ABSTRACT

Synthetic approaches to anthracycline antibiotic analogues in which the nitrogen atom of the carbohydrate portion is incorporated into a 1, 2, 3-triazolyl moiety were investigated. By using methyl 6-azido-2, 6-dideoxy-β-D--arabino-hexopyranoside and methyl 6-azido-2, 3, 6-tricdeoxy--α-L-arabino-hexopyranoside, the corresponding glycosides (16 a, b - 18 a, b) of carminomycinone and daunomycinone were prepared. The desired heterocyclic system was developed directly with the C-3′ and C-6′ azido anthracyclines by means of a cycloaddition process to give 7-0-[6′-(4, 5--dicarboethoxy-l, 2, 3-triazolyl)-2′, 6′-dideoxy-β-D-arabino--hexopyranosyl]-carminomycinone (23) and -daunomycinone (22), and 3′-(4, 5-dicarboethoxy - l, 2, 3-triazolyl)-4′ -epi-daunomycin (24).     

A Recyclable Trinuclear Bifunctional Catalyst Derived from a Tetraoxo Bis‐Zn(salphen) Metalloligand

A tetraoxo bis‐Zn(salphen) supramolecular host can bind various divalent metal salts, thereby providing access to trinuclear bifunctional systems that incorporate both Lewis acid sites and dynamically bound nucleophilic anions. The formation of these trinuclear species was investigated and their stability features were also determined. The application of these trinuclear complexes as bifunctional catalysts was evaluated in the formation of cyclic organic carbonates from epoxides and CO₂. The catalytic data, in combination with control experiments, clearly demonstrate that these trinuclear compounds show much higher recycling potential compared to various control compounds and they can be used in up to five cycles without an observable loss in activity. Furthermore, this new recyclable catalytic system does not require any additives and can be applied under solvent‐free conditions.     

Asymmetric syntheses of (−)-isoretronecanol and (−)-trachelantamidine

Short and concise total asymmetric syntheses of (−)-isoretronecanol and (−)-trachelantamidine are reported. Oxidative cleavage of tert-butyl (S,S,S,Z)-7-[N-benzyl-N-(α-methylbenzyl)amino]cyclohept-3-ene-1-carboxylate, followed by hydrogenolysis promoted in situ cyclisation/reduction, which provided rapid access to the bicyclic core within (−)-isoretronecanol. Analogous treatment of the C(1)-epimer gave (−)-trachelantamidine. Overall, the syntheses of (−)-isoretronecanol and (−)-trachelantamidine were completed in eight and seven steps and 20 and 9.5% yield, respectively, from commercially available starting materials.     

Reactions of enaminones and related compounds with N,N-dimethylacetamide dimethyl acetal. A simple one-pot metal-free synthesis of polysubstituted benzene derivatives

Herein a simple one-pot metal-free synthesis of alkyl-, aryl-, heteroaryl- and alkoxycarbonyl substituted 1,3-bis(dimethylamino)benzene derivatives is described. The products were prepared from the corresponding methyl ketones or compounds with an α-methylene group in regard to the carbonyl group, using N,N-dimethylacetamide dimethyl acetal (DMADMA) as the reagent.     

Headspace stir bar sorptive extraction followed by thermal desorption and gas chromatography with mass spectrometry to determine musk fragrances in sludge samples without sample pretreatment

A direct, simple and solvent‐free method based on headspace stir bar sorptive extraction and thermal desorption gas chromatography with mass spectroscopy was developed to determine 13 musk fragrances (six polycyclic musks, three nitro musks and four macrocyclic musks) in sludge without sample treatment. The optimal headspace stir bar sorptive extraction conditions were achieved when a polydimethylsiloxane stir bar was exposed for 45 min in the headspace of a 10 mL vial filled with 100 mg of sludge mixed with 0.2 mL of water stirred at 750 rpm at 80°C. The stir bar was then desorbed in the thermal desorption gas chromatography and mass spectrometry system, obtaining limits of detection between 5 and 30 ng/g. The method applicability was tested with sewage sludge from two urban wastewater treatment plants and from a potable water treatment plant. Results showed galaxolide and tonalide to be the most abundant musk fragrances found in wastewater treatment plants with maximal concentrations of 9240 and 7500 ng/g, respectively. Maximum concentration levels between 35 and 635 ng/g were found for musk ketone, musk moskene, traseolide, phantolide and celestolide in this kind of samples. Concentrations below the limits of quantitation of phantolide, galaxolide, tonalide and musk ketone were found in sludge from a potable water treatment plant.     

Validation of a novel method to identify in utero ethanol exposure: simultaneous meconium extraction of fatty acid ethyl esters,ethyl glucuronide,and ethyl sulfate followed by LC-MS/MS quantification

Presence of fatty acid ethyl esters (FAEE), ethyl glucuronide (EtG), and ethyl sulfate (EtS) in meconium, the first neonatal feces, identifies maternal alcohol consumption during pregnancy. Current meconium alcohol marker assays require separate analyses for FAEE and EtG/EtS. We describe development and validation of the first quantitative liquid chromatography tandem mass spectrometry assay for 9 FAEEs, EtG, and EtS in 100 mg meconium. For the first time, these alcohol markers are analyzed in the same meconium aliquot, enabling comparison of the efficiency of gestational ethanol exposure detection. 100 mg meconium was homogenized in methanol and centrifuged. The supernatant was divided, and applied to two different solid phase extraction columns for optimized analyte recovery. Limits of quantification for ethyl laurate, myristate, linolenate, palmitoleate, arachidonate, linoleate, palmitate, oleate, and stearate ranged from 25–50 ng/g, with calibration curves to 2,500–5,000 ng/g. EtG and EtS linear dynamic ranges were 5–1,000 and 2.5–500 ng/g, respectively. Mean bias and between-day imprecision were <15 %. Extraction efficiencies were 51.2–96.5 %. Matrix effects ranged from ?84.7 to 16.0 %, but were compensated for by matched deuterated internal standards when available. All analytes were stable (within ±20 % change from baseline) in 3 authentic positive specimens, analyzed in triplicate, after 3 freeze/thaw cycles (?20 °C). Authentic EtG and EtS also were stable after 12 h at room temperature and 72 h at 4 °C; some FAEE showed instability under these conditions, although there was large inter-subject variability. This novel method accurately detects multiple alcohol meconium markers and enables comparison of markers for maternal alcohol consumption.

A novel approach to measure isotope ratios via multi-collector—inductively coupled plasma—mass spectrometry based on sample mixing with a non-enriched standard

In this work, a novel approach to measure isotope ratios via multi-collector—inductively coupled plasma—mass spectrometry (MC-ICP-MS) for low amounts of target element is proposed. The methodology is based on mixing of the sample (target element isolate) with a non-enriched in-house standard, previously characterized for its isotopic composition. This methodology has been applied to isotopic analysis of Cu and of Fe in whole blood samples. For this purpose, different mixtures of sample + in-house standard were prepared and adjusted to a final concentration of 500 μg/L of the target elements for isotopic analysis. δ⁶⁵Cu, δ⁵⁶Fe, and δ⁵⁷Fe varied linearly as a function of the amount of in-house standard (or of sample) present in the mixture. The isotopic composition of the sample was calculated considering the isotope ratios measured for (i) the mixture and (ii) the in-house standard and (iii) the relative concentrations of target element contributed by the sample and the standard to the mixture, respectively. For validation purposes, the isotopic analysis of whole blood Cu was carried out using both the conventional (using 2 mL of whole blood) and the newly developed approach (using 500 μL of whole blood). The δ⁶⁵Cu values obtained using mixtures containing 40 % (200 μg/L) of Cu from the blood samples and 60 % (300 μg/L) of Cu from the in-house standard were in good agreement with the δ⁶⁵Cu value obtained using the conventional approach (bias ≤0.15?‰).