On-fiber photodegradation after solid-phase microextraction of p,p'-DDT and two of its major photoproducts,p,p'-DDE and p,p'-DDD

The potential of performing photochemical studies in solid phase microextraction (SPME) fibers, "photo-SPME", to study the photodegradation of p,p'-DDT and two of its major degradation products, p,p'-DDE and p,p'-DDD, is shown. Analyses were carried out by gas chromatography mass spectroscopy detection. DDT was extracted from aqueous solutions using five different commercial coatings. The fibers were then exposed to UV light emitted by a low-pressure mercury lamp. After 30 min of irradiation, the degradation of DDT only occurred in polydimethylsiloxane fibers. The on-fiber degradation kinetics of p,p'-DDT was studied from 2 to 60 min. A large number of photoproducts were generated and their kinetic behavior was studied. In order to clarify the possible photoreaction pathways for DDT, individual water solutions containing p,p'-DDD or p.p'-DDE were prepared and photo-SPME was performed for each compound at different irradiation times. On the basis of the photoproducts identified, some photodegradation pathways are proposed. Finally, aqueous photodegradation studies followed by SPME were performed and compared to the photo-SPME. This work will show the enormous potential of photo-SPME to perform photodegradation studies.     

Effects of electron-beam irradiation on surface oxidation of polymer composites

The aim of this article was to show the effects of an electron radiation dose and presence of a compatibilizer on the oxidation of composites made of blends of low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP), polystyrene (PS), and poly(ethylene terephthalate) (PET) as well as of blends of LDPE, HDPE, and PP. As the compatibilizers, the styrene-ethylene/butylene-styrene elastomer grafted with maleic anhydride (SEBS-g-MA) and trimethylol propane trimethylacrylate (TMPTA) were used; they were added in the amounts of 5, 10, and 15 wt% and 1, 2, and 3 wt%, respectively. The oxidation of the surface layer (SL) was investigated by the X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). It was found that the extent of the composite oxidation increased with the increasing dose of the electron radiation. The addition of the compatibilizers enhanced the oxidation of the SL but hindered the oxidation of the bulk of the material.     

Amphiphilic block glycopolymers via atom transfer radical polymerization: Synthesis,self‐assembly and biomolecular recognition

In this work the synthesis of poly(butyl acrylate)‐b‐poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate) (PBA‐b‐PHEMAGl) diblock glycopolymer and poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate)‐b‐poly(butyl acrylate)‐b‐poly(2‐{[(D ‐glucosamin‐2‐N‐yl)carbonyl]oxy}ethyl methacrylate) (PHEMAGl‐b‐PBA‐b‐PHEMAGl) was performed via atom transfer radical polymerization. Monofunctional and difunctional poly(butyl acrylate) macroinitiators were used to synthesize the well‐defined diblock and triblock glycopolymers by chain extension reaction with the glycomonomer HEMAGl. The self‐assembly of these glycopolymers in aqueous solution was studied by dynamic light scattering and transmission electron microcopy, showing the coexistence of spherical micelles and polymeric vesicles. In addition, the biomolecular recognition capacity of these micelles and vesicles, containing glucose moieties in their coronas, was investigated using the lectin Concanavalin A, Canavalia Ensiformis, which specifically interacts with glucose groups. The binding capacity of Concanavalin A with glycopolymer is influenced by the copolymer composition, increasing with the length of HEMAGl glycopolymer segment in the block copolymer. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Solution processable high band gap hosts based on carbazole functionalized cyclic phosphazene cores for application in organic light‐emitting diodes

A new class of solution processable dendrimers based on cyclic phosphazene (CP) cores have been prepared and used as host materials for blue and green organic light emitting diodes (OLEDs). The dendrimers are prepared in high yield from minimal step reactions, are soluble in common solvents for solution processing, are amorphous, and have excellent thermal properties necessary for application in OLEDs. OLED efficiencies of 10.3 cd/A (4.2 lm/W) and 35.3 cd/A (33.5 lm/W) were achieved using commercially available FIrpic and Ir(mppy)₃ as blue and green phosphorescent emitters, respectively. These efficiencies were 2× higher than control devices prepared using poly(N‐vinylcarbazole), the most commonly used host material in solution processed phosphorescent OLEDs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

A nonsmooth Lyapunov function and stability for ODE’s of Caratheodory type

The problem of Lyapunov stability for systems of ODE’s of Caratheodory type is considered. It is proved that without the necessity of calculating Dini or Clarke generalized gradients, the locally Lipschitz Lyapunov function can follow different kinds of stability.     

Properties of the density for a three-dimensional stochastic wave equation

We consider a stochastic wave equation in space dimension three driven by a noise white in time and with an absolutely continuous correlation measure given by the product of a smooth function and a Riesz kernel. Let pt,x(y) be the density of the law of the solution u(t,x) of such an equation at points (t,x)∈]0,T]×R³. We prove that the mapping (t,x)?pt,x(y) owns the same regularity as the sample paths of the process {u(t,x),(t,x)∈]0,T]×R³} established in [R.C. Dalang, M. Sanz-Solé, Hölder-Sobolev regularity of the solution to the stochastic wave equation in dimension three, Mem. Amer. Math. Soc., in press]. The proof relies on Malliavin calculus and more explicitly, the integration by parts formula of [S. Watanabe, Lectures on Stochastic Differential Equations and Malliavin Calculus, Tata Inst. Fund. Res./Springer-Verlag, Bombay, 1984] and estimates derived from it.     

Modular Breath Analyzer (MBA): Introduction of a Breath Analyzer Platform Based on an Innovative and Unique,Modular eNose Concept for Breath Diagnostics and Utilization of Calibration Transfer Methods in Breath Analysis Studies

Exhaled breath analysis for early disease detection may provide a convenient method for painless and non-invasive diagnosis. In this work, a novel, compact and easy-to-use breath analyzer platform with a modular sensing chamber and direct breath sampling unit is presented. The developed analyzer system comprises a compact, low volume, temperature-controlled sensing chamber in three modules that can host any type of resistive gas sensor arrays. Furthermore, in this study three modular breath analyzers are explicitly tested for reproducibility in a real-life breath analysis experiment with several calibration transfer (CT) techniques using transfer samples from the experiment. The experiment consists of classifying breath samples from 15 subjects before and after eating a specific meal using three instruments. We investigate the possibility to transfer calibration models across instruments using transfer samples from the experiment under study, since representative samples of human breath at some conditions are difficult to simulate in a laboratory. For example, exhaled breath from subjects suffering from a disease for which the biomarkers are mostly unknown. Results show that many transfer samples of all the classes under study (in our case meal/no meal) are needed, although some CT methods present reasonably good results with only one class.     

On Haagerup’s List of Potential Principal Graphs of Subfactors

We show that any graph, in the sequence given by Haagerup in 1991 as that of candidates of principal graphs of subfactors, is not realized as a principal graph except for the smallest two. This settles the remaining case of a previous work of the first author. The first author was sponsored in part by NSF grant #DMS-0504199.