Phytochemical and Biological Activity Studies on Nasturtium officinale (Watercress) Microshoot Cultures Grown in RITA® Temporary Immersion Systems

The main compounds in both extracts were gluconasturtiin, 4-methoxyglucobrassicin and rutoside, the amounts of which were, respectively, determined as 182.93, 58.86 and 23.24 mg/100 g dry weight (DW) in biomass extracts and 640.94, 23.47 and 7.20 mg/100 g DW in plant herb extracts. The antioxidant potential of all the studied extracts evaluated using CUPRAC (CUPric Reducing Antioxidant Activity), FRAP (Ferric Reducing Ability of Plasma), and DPPH (1,1-diphenyl-2-picrylhydrazyl) assays was comparable. The anti-inflammatory activity of the extracts was tested based on the inhibition of 15-lipoxygenase, cyclooxygenase-1, cyclooxygenase-2 (COX-2), and phospholipase A₂. The results demonstrate significantly higher inhibition of COX-2 for in vitro cultured biomass compared with the herb extracts (75.4 and 41.1%, respectively). Moreover, all the studied extracts showed almost similar antibacterial and antifungal potential. Based on these findings, and due to the fact that the growth of in vitro microshoots is independent of environmental conditions and unaffected by environmental pollution, we propose that biomass that can be rapidly grown in RITA^® bioreactors can serve as an alternative source of bioactive compounds with valuable biological properties.     

Direct separation of the enantiomers of ramosetron on a chlorinated cellulose‐based chiral stationary phase in hydrophilic interaction liquid chromatography mode

Ramosetron is an enantiopure active pharmaceutical ingredient marketed in Japan since 1996 and later in a few Southeast Asian countries predominantly as an antiemetic for patients receiving chemotherapy. In this study, a simple and rapid high‐performance liquid chromoatography method for the separation of ramosetron and its related enantiomeric impurity by using hydrophilic interaction liquid chromatography mode is presented. Chiral resolution was performed on an analytical column (100 mm × 4.6 mm id) packed with 3 μm particles of cellulose‐based Chiralpak IC‐3 chiral stationary phase. Using a mobile phase containing acetonitrile–water–diethylamine (100:10:0.1, v/v/v) and setting the column temperature at 35°C, the resolution value was 7.35. At a flow rate of 1 mL/min, the enantioseparation was completed within 5 min. The proposed method was partially validated and it has proven to be sensitive with limit of detection and limit of quantitation of the (S)‐enantiomer impurity of 44.5 and 133.6 ng/mL.     

Aqueous extracts of Agave sisalana boles have prebiotic potential

Abstract

This work aimed at evaluating the prebiotic potential of the aqueous extract and crude polysaccharides from Agave sisalana boles by an in vitro screening. Crude polysaccharides were obtained from the aqueous bole extract by precipitation with acetone and resuspension in water. The liquid extract and the polysaccharide solution were then spray dried and submitted to thermal analysis and quantification of metabolites. Prebiotic activity was checked on probiotic strains belonging to the Lactobacillus genus using inulin, fructo-oligosaccharides, fructose and glucose as positive controls. The powder of A. sisalana bole extract, which has recently been identified as a rich source of inulin, exhibited higher potential of fermentation compared with crude polysaccharides.     

A relationship between macroradical decay kinetics and α-segmental dynamics in glassy amorphous polymers

For a series of five amorphous polymers with a broad range of T_g values the kinetics of macroradical decay was measured by ESR technique and evaluated by the second-order kinetic model. It was found that the temperature T_tr of the transition between two regions of different reactivity in free radical decay reaction agrees quite well with the temperature parameter T₀ of the Vogel-Fulcher-Tamman-Hesse (VFTH) equation for α-segmental dynamics. This parameter represents the onset of α-segmental mobility in glassy state below T_g. A nontraditional way of the estimation of T₀ values for α-segmental dynamics through study of the macroradical decay in glassy state of amorphous polymers has been suggested. © 1996 John Wiley & Sons, Inc.     

Curing of a rigid rod epoxy resin with an aliphatic diacid: an example of a lightly crosslinked liquid crystalline thermoset

By reacting a rigid rod epoxy terminated molecule (p-bis(2,3-epoxypropoxy)-α-methylstilbene) with an aliphatic carboxylic acid (decanedioic acid), a lightly crosslinked liquid crystalline network is obtained. This network exhibits a smectic-like phase. While the mesophasic structure resulted “frozen” by the crosslinks in the case of higly crosslinked liquid crystalline epoxy resins, in this case a reversible transition from the liquid crystalline to the isotropic phase is observed. Moreover, while curing the same rigid rod epoxy molecule with amines resulted in a thermoset with a nematic structure, in this case a more ordered mesophase can be obtained. Preliminary results show that it is possible to orient macroscopically the mesogenic chains by stretching thin films above the glass transition temperature (T_g) and then quickly cooling down to the glassy state. This makes this material very attractive in the field of optical applications.     

Machine Learning Algorithm to Predict Acidemia Using Electronic Fetal Monitoring Recording Parameters

Background: Electronic fetal monitoring (EFM) is the universal method for the surveillance of fetal well-being in intrapartum. Our objective was to predict acidemia from fetal heart signal features using machine learning algorithms. Methods: A case–control 1:2 study was carried out compromising 378 infants, born in the Miguel Servet University Hospital, Spain. Neonatal acidemia was defined as pH < 7.10. Using EFM recording logistic regression, random forest and neural networks models were built to predict acidemia. Validation of models was performed by means of discrimination, calibration, and clinical utility. Results: Best performance was attained using a random forest model built with 100 trees. The discrimination ability was good, with an area under the Receiver Operating Characteristic curve (AUC) of 0.865. The calibration showed a slight overestimation of acidemia occurrence for probabilities above 0.4. The clinical utility showed that for 33% cutoff point, missing 5% of acidotic cases, 46% of unnecessary cesarean sections could be prevented. Logistic regression and neural networks showed similar discrimination ability but with worse calibration and clinical utility. Conclusions: The combination of the variables extracted from EFM recording provided a predictive model of acidemia that showed good accuracy and provides a practical tool to prevent unnecessary cesarean sections.     

Postdiagenetic Changes in Kerogen Properties and Type by Bacterial Oxidation and Dehydrogenation

A significant part of organic carbon found on the earth is deposited as fossil organic matter in the lithosphere. The most important reservoir of carbon is shale rocks enriched with organic matter in the form of kerogen created during diagenesis. The purpose of this study was to analyze whether the bacterial communities currently inhabiting the shale rocks have had any impact on the properties and type of kerogen. We used the shale rock located on the Fore-Sudetic Monocline, which is characterized by oil-prone kerogen type II. We were able to show that shale rock inhabited by bacterial communities are characterized by oxidized and dehydrated kerogen type III (gas-prone) and type IV (nonproductive, residual, and hydrogen-free). Bacterial communities inhabiting shale rock were dominated by heterotrophs of the Proteobacteria, Firmicutes, and Actinobacteria phyla. Additionally, we detected a number of protein sequences in the metaproteomes of bacterial communities matched with enzymes involved in the oxidative metabolism of aliphatic and aromatic hydrocarbons, which may potentially contribute to the postdiagenetic oxidation and dehydrogenation of kerogen. The kerogen transformation contributes to the mobilization of fossil carbon in the form of extractable bitumen dominated by oxidized organic compounds.     

Effect of Long-Term Potato Starch Retention with Citric Acid on Its Properties

The present study aimed to determine changes in the properties of starch triggered by its long-lasting (1, 2, 4, 7, 10, or 14 days) retention with citric acid (5 g/100 g) at a temperature of 40 °C. The starch citrates obtained under laboratory conditions had a low degree of substitution, as confirmed via NMR and HPSEC analyses. The prolonging time of starch retention with citric acid at 40 °C contributed to its increased esterification degree (0.05–0.11 g/100 g), swelling power (30–38 g/g), and solubility in water (19–35%) as well as to decreased viscosity of the starch pastes. Starch heating with citric acid under the applied laboratory conditions did not affect the course of DSC thermal characteristics of starch pasting. The low-substituted starch citrates exhibited approximately 15% resistance to amylolysis.     

Analysis of perfluorinated compounds in sewage sludge by pressurized solvent extraction followed by liquid chromatography-mass spectrometry

Perfluorinated compounds (PFCs) are widely used in everyday life and one of the main recipients of these compounds is waste water treatment plants (WWTPs). Due to the structure and physicochemical properties of PFCs, these compounds could be redistributed from influent water to sludge. This work reports a new validated protocol for the analysis of 13 perfluorinated acids, 4 perfluorosulfonates and the perfluorooctanesulfonamide. The present work has been focused to develop a sensitive and robust method for the analysis of 18 PFCs in sewage sludge, based on pressurized solvent extraction (PSE) followed by solid phase extraction (SPE) clean-up, analytes separation by liquid chromatography and analysis in a hybrid quadrupole-linear ion trap mass spectrometer (LC-QLiT-MS/MS) working in single reaction monitoring (SRM) mode. The final methodology was validated using a blank sewage sludge fortified at different concentration levels. The method limits of detection were ranging in general from 15 to 79 ng/kg. These values were comparable to the decision limit (CCα) and the detection capability (CCβ), which were 17-1134 ng/kg and 18-1347 ng/kg, respectively. The percentage of recovery was from 79 to 111% in the most cases at different spiked levels. Finally, the repeatability of the method was in the range 4% (PFOS and PFOA) to 25% (RSD %). In order to evaluate the applicability of the method, 5 sludge samples were analyzed. The results showed that the 18 PFCs were present in all samples. However, the concentrations for most of them were below the limits of quantification. The compound present at higher concentrations was perfluorooctanesulfonate (PFOS), which was in concentrations from 53.0 to 121.1 μg/kg. The other PFCs were at concentrations between 0.3 and 30.3 μg/kg.     

Enzymatic synthesis of medium chain monoglycerides in a solvent-free system

The synthesis of monocaprin, monolaurin, and monomyristin in a solvent-free system was conducted by mixing a commercial immobilized lipase with the organic reactants (glycerol and fatty acids) in a 20-mL batch reactor with constant stirring. The effects of temperature, fatty acid/glycerol molar ratio, and enzyme concentration on the reaction conversion were determined. The addition of molecular sieves in the assays of monomyristin synthesis was also evaluated. The reactions were carried out for 5 to 6 h and the nonpolar phase was analyzed by gas chromatography. The best results in terms of selectivity and conversion (defined as the percentage of fatty acid consumed) were achieved when the stoichiometric amount of reagents (molar ratio=1) and 9% (w/w) commercial enzyme were used and the reaction was performed at 60°C. The addition of molecular sieves did not improve the synthesis of monomyristin. Conversions as high as 80%, with monoglycerides being the major products, were attained. After 5 h of reaction, the concentration of monoglyceride was about twice that of diglyceride, and only trace amounts of triglyceride were found. The results illustrate the technical possibility of producing medium chain monoglycerides in a solvent-free medium using a simple batch reactor.