Evaluation of a dual electrospray ionization/atmospheric pressure chemical ionization source at low flow rates (∼50 µL/min) for the analysis of both highly and weakly polar compounds

The atmospheric pressure ionization (API) source for a commercial mass spectrometer was modified to operate as a dual source in both the electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI) techniques by simultaneously utilizing the electrospray probe and the corona discharge needle. A switching box was designed to operate in either manual or programmable modes to permit rapid switching between ionization techniques without changing sources, probes, or breaking vacuum. The source can be operated using the following ionization techniques: ESI only, APCI only, ESI/APCI simultaneously, and ESI/APCI alternatingly. The optimum operating conditions for these ionization techniques were similar to the manufacturer’s original specifications except that the APCI flow rate was lower (～50 µL/min versus 1000 µL/min) and externally heated nebulizing gas was found to be desirable. A four-component mixture, introduced by flow injection, was used to demonstrate the versatility of the dual ESI/APCI source.     

Electrospray ionization Fourier transform ion cyclotron resonance mass spectrometric analysis of metal-ion selected dynamic protein libraries

The application of electrospray ionization (ESI) Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometry to the investigation of the relative stabilities (and thus packing efficiencies) of Fe-bound trihelix peptide bundles is demonstrated. Small dynamic protein libraries are created by metal-ion assisted assembly of peptide subunits. Control of the trimeric aggregation state is coupled to stability selection by exploiting the coordination requirements of Fe(2+) in the presence of bidentate 2,2'-bipyridyl ligands covalently appended to the peptide monomers. At limiting metal-ion concentration, the most thermodynamically stable, optimally packed peptide trimers dominate the mass spectrum. The identities of optimally stable candidate trimers observed in the ESI FT-ICR mass spectra are confirmed by resynthesis of exchange-inert analogues and measurement of their folding free energies. The peptide composition of the trimers may be determined by infrared multiphoton dissociation (IRMPD) MS(3) experiments. Additional sequence information for the peptide subunits is obtained from electron capture dissociation (ECD) of peptides and metal-bound trimers. The experiments also suggest the presence of secondary structure in the gas phase, possibly due to partial retention of the solution-phase coiled coil structure.     

Activation entropy of electron transfer reactions

We report microscopic calculations of free energies and entropies for intramolecular electron transfer reactions. The calculation algorithm combines the atomistic geometry and charge distribution of a molecular solute obtained from quantum calculations with the microscopic polarization response of a polar solvent expressed in terms of its polarization structure factors. The procedure is tested on a donor–acceptor complex in which ruthenium donor and cobalt acceptor sites are linked by a four-proline polypeptide. The reorganization energies and reaction energy gaps are calculated as a function of temperature by using structure factors obtained from our analytical procedure and from computer simulations. Good agreement between two procedures and with direct computer simulations of the reorganization energy is achieved. The microscopic algorithm is compared to the dielectric continuum calculations. We found that the strong dependence of the reorganization energy on the solvent refractive index predicted by continuum models is not supported by the microscopic theory. Also, the reorganization and overall solvation entropies are substantially larger in the microscopic theory compared to continuum models.     

Synthesis and structural characterization of η-allyl(α-diimine)nickel(II) complexes bearing trimethylsilyl groups

A set of isomeric para- and meta-trimethylsilylphenyl ortho-substituted N,N-phenyl α-diimine ligands [(Ar-NC(Me)-(Me)CN-Ar) Ar=2,6-di(4-trimethylsilylphenyl)phenyl (16); Ar=2,6-di(3-trimethylsilylphenyl)phenyl (17)] have been synthesized through a two-step procedure. The palladium-catalysed cross-coupling reaction between 2,6-dibromophenylamine (7) and 4-trimethylsilylphenylboronic acid (8), 3-trimethylsilylphenylboronic acid (9) was used to prepare 4,4^′-bis(trimethylsilyl)-[1,1^′;3^′,1″]terphenyl-2^′-ylamine (10) and 3,3^′-bis(trimethylsilyl)-[1,1^′;3^′,1″]terphenyl-2^′-ylamine (11). The di-1-adamantylphosphine oxide Ad₂P(O)H (13) and di-tert-butyl-trimethylsilylanylmethylphosphine tert-Bu₂P-CH₂-SiMe₃ (14) were used for the first time as ligands for the Suzuki coupling. The condensation of 2,2,3,3-tetramethoxybutane (15) with anilines 10 and 11 afforded α-diimines 16 and 17. The reaction of π-allylnickel chloride dimer (18), α-diimines (16), (17) and sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (BAF) (19) or silver hexafluoroantimonate (20) led to two sets of isomeric complexes [η³-allyl(Ar-NC(Me)-(Me)CN-Ar)Ni]⁺ X⁻, [Ar=2,6-di(4-trimethylsilylphenyl)phenyl, X=BAF (3), X=SbF₆ (4); Ar=2,6-di(3-trimethylsilylphenyl)phenyl, X=BAF (5), X=SbF₆ (6)]. The steric repulsion of closely positioned trimethylsilyl groups in 4 caused the distortion of the nickel square planar coordination by 17.6° according to X-ray analysis.     

Synthesis of lipid A derivatives and their interactions with polymyxin B and polymyxin B nonapeptide

Lipid A is the causative agent of Gram-negative sepsis, a leading cause of mortality among hospitalized patients. Compounds that bind lipid A can limit its detrimental effects. Polymyxin B, a cationic peptide antibiotic, is one of the simplest molecules capable of selectively binding lipid A and may serve as a model for further development of lipid A binding agents. However, association of polymyxin B with lipid A is not fully understood, primarily due to the low solubility of lipid A in water and inhomogeneity of lipid A preparations. To better understand lipid A-polymyxin B interaction, pure lipid A derivatives were prepared with incrementally varied lipid chain lengths. These compounds proved to be more soluble in water than lipid A, with higher aggregation concentrations. Isothermal titration calorimetric studies of these lipid A derivatives with polymyxin B and polymyxin B nonapeptide indicate that binding stoichiometries (peptide to lipid A derivative) are less than 1 and that affinities of these binding partners correlate with the aggregation states of the lipid A derivatives. These studies also suggest that cooperative ionic interactions dominate association of polymyxin B and polymyxin B nonapeptide with lipid A.     

Comparison of uncoated, pyro-coated and totally pyrolytic graphite tubes for the HGA-500 electrothermal atomiser

The analytical performance of three uncoated electrographite tubes, three pyro-coated electrographite tubes, one tantalum carbide (TaC) coated electrographite tube, and three totally pyrolytic graphite (TPG) tubes has been evaluated and compared. A test programme was devised to determine the useful operational lifetime of each tube, and assess the influence of tube age on the sensitivity of lead, manganese and vanadium measurements by atomic absorption spectrometry. The TPG tubes were found to be more durable than the other types studied, but the lifetime advantage depended on the thickness of the pyrolytic graphite. The best TPG tube, of 720 μm wall-thickness, lasted 2.5 times longer than the pyro-coated tubes, and 5 times longer than the uncoated electrographite tubes.The TPG tubes gave slightly poorer AAS sensitivity for lead, equivalent sensitivity for manganese, and 4 times better sensitivity for vanadium than the pyro-coated electrographite tubes. Also, with TPG, signal magnitude was more consistent throughout the lifetime of a tube. For each of the test elements studied, poorest sensitivity was encountered with the TaC-coated electrographite tube.     

Self-Assembling Catalytic Peptide Nanomaterials Capable of Highly Efficient Peroxidase Activity

The self-assembly of short peptides gives rise to versatile nanomaterials capable of promoting efficient catalysis. We have shown that short, seven-residue peptides bind hemin to produce functional catalytic materials which display highly efficient peroxidation activity, reaching a catalytic efficiency of 3×10⁵ m ⁻¹ s⁻¹. Self-assembly is essential for catalysis as non-assembling controls show no activity. We have also observed peroxidase activity even in the absence of hemin, suggesting the potential to alter redox properties of substrates upon association with the assemblies. These results demonstrate the practical utility of self-assembled peptides in various catalytic applications and further support the evolutionary link between amyloids and modern-day enzymes.     

Regioselectivity in the Acid Cleavage of Bicyclo[4.1.0]Heptan-3-Ones

Acid-promoted cyclopropane cleavage reactions have been employed with great success for the generation of angular methyl groups.² Sims has shown that the regioselectivity of such reactions may be influenced by acid strength.^2d We now report a case in which steric factors appear to direct the cleavage pathway.