Stereoselective synthesis of unnatural α-amino acid derivatives through photoredox catalysis

A protocol for stereoselective C-radical addition to a chiral glyoxylate-derived N-sulfinyl imine was developed through visible light-promoted photoredox catalysis, providing a convenient method for the synthesis of unnatural α-amino acids. The developed protocol allows the use of ubiquitous carboxylic acids as radical precursors without prior derivatization. The protocol utilizes near-stoichiometric amounts of the imine and the acid radical precursor in combination with a catalytic amount of an organic acridinium-based photocatalyst. Alternative mechanisms for the developed transformation are discussed and corroborated by experimental and computational studies.

A protocol for stereoselective C-radical addition to a chiral glyoxylate-derived N-sulfinyl imine was developed through visible light-promoted photoredox catalysis, providing a convenient method for the synthesis of unnatural α-amino acids.     

Complex formation of isocytosine tautomers with PdII and PtII

Isocytosine (ICH) exists in solution as two major tautomers, the keto form with N1 carrying a proton (1a) and the keto form with N3 being protonated (1b). In water, 1a and 1b exist in equilibrium with almost equal amounts of both forms present. Reactions with a series of Pd(II) and Pt(II) am(m)ine species such as (dien)Pd(II), (dien)Pt(II), and trans-(NH(3))(2)Pt(II) reveal, however, a distinct preference of these metals for the N3 site, as determined by (1)H NMR spectroscopy. Individual species have been identified by the pD dependence of the ICH resonances. pK(a) values (calculated for H(2)O) for deprotonation of the individual tautomers complexes are 6.5 and 6.4 for the N3 linkage isomers of dienPd(II) and dienPt(II), respectively, as well as 6.2 and 6.0 for the N1 linkage isomers. The dimetalated species [(dienM)(2)(IC-N1,N3)](3+) (M = Pd(II) or Pt(II)) are insensitive over a wide range of pD. The crystal structure analysis of [(dien)Pd(ICH-N3)](NO(3))(2) is reported. Ab initio calculations have been performed for tautomer compounds of composition [(NH(3))(3)Pt(ICH)](2+), cis- and trans-[(NH(3))(2)PtCl(ICH)](+), as well as trans-[(NH(3))(2)Pt(ICH)(2)](2+). Without exception, N3 linkage isomers are more stable, in agreement with experimental findings. As to the reasons for this binding preference, an NBO (natural bond orbital) analysis for [(NH(3))(3)Pt(ICH-N3)](2+)strongly suggests that intramolecular hydrogen bonding between trans-positioned NH(3) ligands and the two exocyclic groups of the ICH is of prime importance. The calculations furthermore show a marked pyramidalization of the NH(2) group of ICH in the complex once the heterocyclic ligand forms a dihedral angle <90 degrees with the Pt coordination plane.     

Analysis of saccharides in beer samples by flow injection with electrospray mass spectrometry

Saccharides in foods play important roles, as they are essential substrates for fermentation processes. In brewing, the concentration of maltooligosaccharides influences the characteristics of beers and therefore their determination is of great practical interest. Electrospray ionization mass spectrometry (ESI-MS) was applied to identify and characterise maltooligosaccharides in beer samples. The effects due to different cation concentrations and dilution of samples were studied. Furthermore, quantitative analyses of maltooligosaccharides by means of flow-injection ESI-MS (FI/ESI-MS) of 1-microL beer samples (diluted 1000-fold) are described.     

Characterization of CNS disorders and evaluation of therapy using structural and functional MRI

Modern drug development requires technologies that allow rapid translation from the preclinical to the clinical stage. It is obvious that non-invasive imaging modalities such as magnetic resonance imaging (MRI) will play a central role in this regard. This article reviews the use of structural and functional MRI readouts for characterization of central nervous system (CNS) disorders and evaluation of the efficacy of potential CNS drugs. Examples comprise dementia of Alzheimer's type, cerebral ischemia, and neuroinflammation covering both clinical and preclinical aspects. In these examples MRI has been used to obtain relevant structural information on brain atrophy, on the location and extent of ischemic brain areas, and on the number and distribution of demyelinated plaques. These structural data are complemented by readouts assessing the functional consequences associated with the pathomorphological changes. In the last decade, MRI has evolved into a standard tool for the development of CNS drugs. With regard to target-specific/molecular imaging applications MRI is limited by its inherently low sensitivity; complementary imaging modalities utilizing optical and radionuclear reporter systems will thus be required.     

The Reactivity of Bis(para‐methoxyphenyl)telluroxide towards Triflic Acid and Diphenylphosphinic Acid. Theoretical Considerations of the Protonation and Hydration Process of Diorganotelluroxanes

The reaction of (p‐MeOC₆H₄)₂TeO with two equivalents of HO₃SCF₃ and HO₂PPh₂ provided the tetraorganoditelluroxanes (F₃CSO₃)(p‐MeOC₆H₄)₂TeOTe(p‐MeOC₆H₄)₂(O₃SCF₃) ( 1 ) and (Ph₂PO₂)(p‐MeOC₆H₄)₂TeOTe(p‐MeOC₆H₄)₂(O₂PPh₂)·2 Ph₂PO₂H ( 2 ) in good yields. Compounds 1 and 2 were characterized by solution and solid‐state ³¹P and ¹²⁵Te NMR spectroscopy, IR spectroscopy, electrospray mass spectrometry, conductivity measurements and single crystal X‐ray diffraction. In solution, compound 1 undergoes an electrolytic dissociation and reversibly reacts with traces of water to give the mononuclear cation [(p‐MeOC₆H₄)₂TeOH]⁺ and triflate anions. Theoretical aspects of the protonation and hydration of model telluroxanes R₂TeO (R = H, Me, Ph) were investigated by preliminary DFT calculations and compared to the corresponding selenoxanes R₂SeO. The tellurium dihydroxides R₂Te(OH)₂ seem to be more stable than the hydrogen‐bonded complexes R₂TeO·H₂O.     

Negatively charged hyperbranched polyether-based polyelectrolytes

The preparation of carboxylated hyperbranched polyglycerols of narrow polydispersity was achieved by modification (78–90%) of the hydroxyl end groups via Michael addition of acrylonitrile, followed by hydrolysis. High conversion could only be achieved for low molecular weight starting materials (520 and 1,030 g mol⁻¹). The solution properties of the resulting materials were investigated by dynamic light scattering (DLS), showing the formation of large aggregates with size depending on the pH value. After deposition on a negatively charged mica surface, the structures observed by atomic force microscope (AFM) show the coexistence of aggregates and single macromolecules. Most interesting, in the case of the lower molecular weight sample (PG 520 g mol⁻¹), extended and ordered terrace structures were formed, which are unprecedented for hyperbranched polymers and are of interest for surface modification in general.     

On the origin of geminal regioselectivity in the ene reaction of singlet oxygen with substituted alkenes

The geminal regioselectivity observed in the ene reaction between singlet oxygen and alkenes with anion-stabilizing groups is rationalized on the basis of a perepoxide intermediate, in which in analogy to the nucleophilic attack on protonated epoxides, the perepoxide is opened preferentially at the C---O bond weakened by the substituent.     

A QM-MM interface between CHARMM and TURBOMOLE: implementation and application to systems in bulk phase and biologically active systems

The implementation of a hybrid QM-MM approach combining ab initio and density functional methods of TURBOMOLE with the molecular mechanics program package CHARMM is described. An interface has been created to allow data exchange between the two applications. With this method the efficient multiprocessor capabilities of TURBOMOLE can be utilized with CHARMM running as a single processor application. Therefore, features of nonparallel running code in CHARMM like the TRAVEL module for locating saddle points or VIBRAN for the calculation of second derivatives can be exploited by running the CPU intensive QM calculations in parallel. To test the methodology, several small systems are studied with both Hartree-Fock and density functional methods and varying QM-MM boundaries. Also, the computationally efficient RI-J method has been examined for use in QM-MM applications. A B(12) cofactor containing cobalt has been studied, to examine systems with a large QM region and transition metals. All tested methods perform satisfactory in comparison with pure quantum calculations. Additionally, algorithms for the characterization of saddle points have been tested for their potential use in QM-MM problems. The TRAVEL module of CHARMM has been applied to the Menshutkin reaction in the condensed phase, and a saddle point was located. This saddle point was verified by calculation of a steepest descent path connecting educt, transition state, and product, and by calculation of vibrational modes.     

Basis set and density functional dependence of vibrational Raman optical activity calculations

We present an extensive investigation of the dependence of the scattering intensity difference of right and left circularly polarized light observed in vibrational Raman optical activity (VROA) on the choice of basis set and exchange-correlation functional. These dependencies are investigated for five molecules for which accurate experimental data are available: (S)-methyloxirane, (R)-epichlorhydrin, (S)-glycidol, (M)-spiro[2,2]pentane-1,4-diene, and (M)-sigma-[4]-helicene. Calculations are presented using the SVWN exchange-correlation functional (LDA), the BLYP exchange-correlation functional, and the B3LYP hybrid functional, using six different basis sets: the cc-pVDZ, cc-pVTZ, aug-cc-pVDZ, aug-cc-pVTZ, Sadlej's polarized basis set, and a minimal VROA basis set recently proposed by Zuber and Hug. It is demonstrated that results from pure gradient-corrected and hybrid functionals are comparable and that the aug-cc-pVDZ and aug-cc-pVTZ basis sets yield similar results. Furthermore, the combination of the small basis set by Zuber and Hug with an accurate force field represents the best compromise between computational accuracy and computational efficiency.     

Immunoaffinity screening with capillary electrochromatography

Highly efficient capillary electrochromatographic separations of cardiac glycosides and other steroids are presented. Employing butyl-derivatized silica particles as stationary phase resulted in a nearly three times faster electroosmotic flow (EOF) compared to capillary electrochromatography (CEC) with octadecyl silica particles. On-column focusing with a preconcentration factor of 180 was performed and separation efficiencies of up to 240,000 plates per meter were obtained. Using label-free standard UV absorbance, detection limits of 10-80 nM were reached for all steroids tested. For screening of cardiac glycosides, e.g., digoxin and digitoxin in mixtures of steroids, CEC was combined with immunoaffinity extraction using immobilized polyclonal anti-digoxigenin antibodies and F(ab) fragments. Simply adding small amounts of antibody carrying particles to the samples and comparing chromatograms before and after antibody addition allowed screening for high affinity antigens in mixtures with moderate numbers of compounds. Under conditions of competing antigens, affinity fingerprints of immobilized anti-digoxigenin and anti-digitoxin antibodies were obtained, reflecting the cross-reactivity of eleven steroids. The method provides high selectivity due to the combination of bioaffinity interaction with highly efficient CEC separation and UV detection at several wavelengths in parallel. This selectivity was exploited for the detection of four cardiac glycosides in submicromolar concentrations in an untreated urine sample.