Synthesis and self-assembly of galactose-terminated alkanethiols and their ability to resist proteins

The synthesis of two galactose-terminated alkanethiols with the structural formula X-OC2H5NHCO(CH2)15SH (X = 2,3,4,6-tetra-O-methyl-beta-D-Gal or beta-D-Gal) is described. Single-component and mixed self-assembled monolayers (SAMs) of the methylated and nonmethylated compounds were prepared on gold and subsequently characterized with ellipsometry, contact angle goniometry, and infrared reflection-absorption spectroscopy. Studies of the irreversible protein adsorption onto the SAMs using ex-situ ellipsometry revealed very low levels of fibrinogen and lysozyme adsorption onto mixed SAMs displaying advancing water contact angles between 24 degrees and 45 degrees and below 45 degrees , respectively. A monomethylated compound (X = 6-O-methyl-beta-D-Gal) was also synthesized and assembled on gold. This particular compound was found to possess wettability properties corresponding to the low adsorption regime of the mixed SAMs, and the results from the same set of fibrinogen and lysozyme adsorption experiments showed very low levels of protein adsorption. Our findings suggest that the protein rejecting properties rely on a fine balance between the surface energy and/or hydrogen bond donating/accepting properties of the SAM surface.     

Diastereoface Selectivity During Pthalimidonitrene Additions to (E)-and (Z)-configurated α, β-unsaturated esters,induced by a chiral center in the γ-position

In-situ-generated phthalimidonitrene was added to five α, β-unsaturated esters containing a chiral secondary O-function at C(γ). The additions were fully suprafacial, inasmuch as the (E)-isomers 1 afforded only the trans-aziridines 2 and 3 (J(β, γ) = 4.8?5.1 Hz) and the (Z)-isomers 4 only the cis-aziridines 5 and 6 (8.2?8.5 Hz). The products 2 , 3 , 5 , and 6 where shown to possess the arabino-, xylo-, ribo-, and lyxo- configuration, respectively, by X-ray structure analysis of 2b , 2d , and 6a . The diastereoface selectivity of the nitrene additions, induced by the chiral substructure around C(γ), resulted in more 2 than 3 from 1 , but more 6 than 5 from 4 , which means that the preference of attack at the double bond switches from one side to the other depending on the C=C configuration. The preferences were higher at lower temperature. The aziridines 2a , 2d , and 3d exhibit ¹H-NMR-visible isomerism at the ring N-atom; the major (78?95 %)invertomer A is always the one with the phthalimido group in trans-position to the (larger) substructure around C(γ). The other aziridines only show ¹H-NMR signals of one invertomer, which – by steric reasoning - ought to be A ; this is confirmed by a ¹H-NMR argument for 3a , 5a , 6a , 5c , and 6c .     

Bilden sich aus Pentafulven und Cyclopentadien [6+4]-Cycloaddukte??

Does [6+4] Cycloaddition between Pentafulvene and Cyclopentadiene Take Place? Reaction of a 1:1 mixture of cyclopentadiene (CPD) and pentafulvene ( 1a ) at 20° gives a complex mixture. The low-molecular-weight part mainly consists of pure and mixed dimers (ca. 73 %) besides corresponding trimers (ca. 20%) and some corresponding oligomers according to GC/MS investigations (Fig. 1). The 3 predominant ‘mixed dimers’ between CPD and 1a have been separated, and structures 4 – 6 (Scheme 3) are assigned according to 400- and 600-MHz ¹H-NMR investigations. These results show that HOMO(CPD)-LUMO(fulvene) interactions are important in pentafulvene cycloadditions. Dimer 6 results from [6+4] cycloaddition followed by [1,5]-H shifts.     

A quantum-chemical study of dinitrogen reduction at mononuclear iron-sulfur complexes with hints to the mechanism of nitrogenase

The mechanism of biological dinitrogen reduction is still unsolved, and the structure of the biological reaction center, the FeMo cofactor with its seven iron atoms bridged by sulfur atoms, is too complicated for direct attack by current sophisticated quantum chemical methods. Therefore, iron-sulfur complexes with biologically compatible ligands are utilized as models for studying particular features of the reduction process: coordination energetics, thermodynamic stability of intermediates, relative stability of isomers of N2H2, end-on versus side-on binding of N2, and the role of states of different multiplicity at a single iron center. From the thermodynamical point of view, the crucial steps are dinitrogen binding and reduction to diazene, while especially the reduction of hydrazine to ammonia is not affected by the transition metal complex, because the complex-free reduction reaction is equally favored. Moreover, the abstraction of coordinated ammonia can be easily achieved and the complex is recovered for the next reduction cycle. Our results are discussed in the light of studies on various model systems in order to identify common features and to arrive at conclusions which are of importance for the biological mechanism.     

Determination of carnitine and acylcarnitines in urine by high-performance liquid chromatography-electrospray ionization ion trap tandem mass spectrometry

A high-performance liquid chromatography-mass spectrometry method has been developed for the simultaneous determination of native carnitine and eight acylcarnitines in urine. The procedure uses a solid-phase extraction on a cation-exchange column and the separation is performed without derivatization within 17 min on a reversed-phase C8 column in the presence of a volatile ion-pairing reagent. The detector was an ion trap mass spectrometer and quantification was carried out in the MS-MS mode. Validation was done for aqueous standards at ranges between 0.75 and 200 micromol/l, depending on the compound. Carnitine was quantified in urine and comparison with a radioenzymatic assay gave a satisfactory correlation (R2 = 0.981). The assay could be successfully applied to the diagnostic of pathological acylcarnitines profile of metabolic disorders in urines of patients suffering from different organic acidurias.     

MM3 parametrization of four‐ and five‐coordinated rhenium complexes by a genetic algorithm—Which factors influence the optimization performance?

Genetic algorithms (GA) were used to solve one of the multidimensional problems in computational chemistry, the optimization of force field parameters. The correlation between the composition of the GA, its parameters (p(c), p(m)) and the quality of the results were investigated. The composition was studied for all combinations of a Simple GA/Steady State GA with a Roulette Wheel/Tournament Selector using different values each for crossover (0.5, 0.7, 0.9) and mutation rates (0.01, 0.02, 0.05, 0.10, 0.20). The results show that the performance is strongly dependent on the GA scheme, where the Simple GA/Tournament Selector yields the best results. Two new MM3 parameters were introduced for rhenium compounds with coordination number four (204) and coordination number five (205), the formal oxidation states of rhenium ranging from +V to +VII. A manifold of parameters (Re-C, N, O, S) was obtained by using a diverse set of CSD structures. The advantage of the GA vs. UFF calculations is shown by comparison of several examples. The GA optimized parameters were able to reproduce the geometrical data of the X-ray structures.     

Solution-processed anodes from layer-structure materials for high-efficiency polymer light-emitting diodes

The development of low-cost, large-area electronic applications requires the deposition of active materials in simple and inexpensive techniques at room temperature, properties usually associated with polymer films. In this study, we demonstrate the integration of solution-processed inorganic films in light-emitting diodes. The layered transition metal dichalcogenide (LTMDC) films are deposited through Li intercalation and exfoliation in aqueous solution and partially oxidized in an oxygen plasma generator. The chemical composition and thickness of the LTMDC and corresponding transition metal oxide (TMO) films are investigated by X-ray photoelectron spectroscopy. The morphology and topography of the films are studied by atomic force microscopy. X-ray powder diffraction is used to determine the orientation of the LTMDC film. Finally, the LTMDC and their corresponding oxides are utilized as hole-injecting and electron-blocking materials in polymer light-emitting diodes with the general structure ITO/LTMDC/TMO/polyfluorene/Ca/Al. Efficient hole injection and electron blocking by the inorganic layers result in outstanding device performance and high efficiency.     

Dielectric Shielding of Ionic Charges in Aqueous Solutions of Different Ionic Strength

The thermodynamic functions of the proton transfer H₂tn²⁺+tn → 2 Htn⁺ (tn = 1,3-diaminopropane) have been determined in aqueous solutions containing different amounts of KCl (0.05 ? μ ? 3.01). The free energy (?ΔG) of the process decreases, whereas the enthalpy (-ΔH) increases with μ. There is reason to believe that the reaction is entirely controlled by the Coulomb forces between the two protonic charges. The electrostatic energy involved can be described in terms of a model incorporating an effective dielectric constant εe, such that δε_e/δμ and δ²ε_e/δμδT are both positive. The polarisation of pure water is produced by orientation of hydrogen-bonded dipole molecules H₂O, whereas the electrolyte solution is polarised in addition by dislocation of the ions K⁺ and Cl^?. Our results demonstrate that the former type of polarisation is much more temperature dependent than the latter.     

Self-assembled monolayers of dendritic polyglycerol derivatives on gold that resist the adsorption of proteins

Highly protein-resistant, self-assembled monolayers (SAMs) of dendritic polyglycerols (PGs) on gold can easily be obtained by simple chemical modification of these readily available polymers with a surface-active disulfide linker group. Several disulfide-functionalized PGs were synthesized by N,N'-dicyclohexylcarbodiimide-mediated ester coupling of thioctic acid. Monolayers of the disulfide-functionalized PG derivatives spontaneously form on a semitransparent gold surface and effectively prevent the adsorption of proteins, as demonstrated by surface plasmon resonance (SPR) kinetic measurements. A structure-activity relationship relating the polymer architecture to its ability to effectuate protein resistance has been derived from results of different surface characterization techniques (SPR, attenuated total reflectance infrared (ATR-IR), and contact-angle measurements). Dendritic PGs combine the characteristic structural features of several highly protein-resistant surfaces: a highly flexible aliphatic polyether, hydrophilic surface groups, and a highly branched architecture. PG monolayers are as protein resistant as poly(ethylene glycol) (PEG) SAMs and are significantly better than dextran-coated surfaces, which are currently used as the background for SPR spectroscopy. Due to the higher thermal and oxidative stability of the bulk PG as compared to the PEG and the easy accessibility of these materials, dendritic polyglycerols are novel and promising candidates as surface coatings for biomedical applications.     

Practical ex-chiral-pool methodology for the synthesis of dopaminergic tetrahydroindoles

Chemo- and regioselective transformations of asparagine gave access to optically active 5- and 6-amino tetrahydroindolizines when the 3-aminobutyrolactone (S)-2 was employed as a key intermediate. The target compounds were approached by a sequential and regiocontrolled bis-electrophilic attack in the positions 2 and 3 of the pyrrole ring system. Receptor binding experiments showed stereocontrolled receptor recognition leading to the D3 selective agonist (S)-8 with D3 binding that is comparable to the natural neurotransmitter dopamine.