Examination of the electrophoretic behavior of liposomes

The electromigration of liposomes is a complex process resulting in many unexpected behaviors that are difficult to address with existing theories. In this study, the electrophoretic behaviors of liposome populations under various conditions were examined through the use of capillary electrophoresis and the results compared to classical electrokinetic, colloid, and spheroid theories. To elucidate the possible effects of applied field strength, bilayer rigidity, and surface charge on these behaviors, the electrophoretic mobilities of liposome populations were monitored while varying the applied potential, ionic strength of the medium, and the surface charge and cholesterol content of the liposomes. On the basis of comparisons made to the theoretical predictions, our results suggest that liposomal deformation and field-induced polarization may occur during electrophoresis and these mechanisms help to describe many of the observed behaviors.     

Transition metal coordination polymers with polycarboxylic acid as bridging ligands: Synthesis and structure characterization of [Fe(μ4-bta)0.5(phen)(OH)]<Subscript>n</Subscript>

A new 2D (two-dimensional) coordination polymer, [Fe(μ4-bta)o.5(phen)(OH)]_n (1), has been hydrothermally synthesized with FeCl₃ 6H₂, Na₄bta (h₄bta = 1,2,4,5-benzentetracarboxylic acid), 1,10-phen (1,10-phenanthroline) and H₂O as raw materials. The crystals of the compound belong to monoclinic P2₁/n space group, a = 1.0129(2) nm, b = 0.9265(2) nm, c = 1.5696(3) nm, β=91.37(3)°V=1.4721(5) nm³,Z=3, final R₁=0.0292, wR ₂=0.0798 for 2572 [/>2σ(/)] observed reflections. The result of structure determination shows that in the compound each bta ligand is connected with four Fe³, forming a new μ4-coordination mode. Four deprotonated carboxylic groups of bta link to Fe³ ions alternatively through monodentate and bidentate coordination fashion, constructing 2D layer network. The measurement of variable temperature magnetic susceptibility indicates that there exist antiferromagnetic interactions between Fe³ ions in the compound. The TGA spectrum displays relatively fine thermal stability of the compound. In addition, IR and UV-Vis spectra of compound 1 have also been measured.     

The boron-catalyzed polymerization of dimethylsulfoxonium methylide. A living polymethylene synthesis

Trialkyl and aryl organoboranes catalyze the polymerization of dimethylsulfoxonium methylide (1). The product of the polymerization is a tris-polymethylene organoborane. Oxidation affords linear telechelic alpha-hydroxy polymethylene. The polymer molecular weight was found to be directly proportional to the stoichiometric ratio of ylide/borane, and polydispersities as low as 1.01-1.03 have been realized. Although oligomeric polymethylene has been the most frequent synthetic target of this method, polymeric star organoboranes with molecular weights of 1.5 million have been produced. The average turnover frequency at 120 degrees C in 1,2,4,5-tetrachlorobenzene/toluene is estimated at >6 x 10(6) g of polymethylene (mol boron)(-1) h(-1). The mechanism of the polyhomologation reaction involves initial formation of a zwitterionic organoborane.ylide complex which breaks down in a rate-limiting 1,2-alkyl group migration with concomitant expulsion of a molecule of DMSO. The reaction was found to be first order in the borane catalyst and zero order in ylide. DMSO does not interfere with the reaction. The temperature dependence of the reaction rate yielded the following activation energy parameters (toluene, DeltaH(++) = 23.2 kcal/mol, DeltaS(++) = 12.6 cal deg/mol, DeltaG(++) = 19.5 kcal/mol; THF, DeltaH(++) = 26.5 kcal/mol, DeltaS(++) = 21.5 cal deg/mol, DeltaG(++) = 20.1 kcal/mol).     

Solid-state pH nanoelectrode based on polyaniline thin film electrodeposited onto ion-beam etched carbon fiber

An ultramicro pH sensor has been constructed based on a thin polyaniline film that was electrochemically deposited onto a carbon fiber nanometer-size electrode. The substrate nanoelectrodes were fabricated using ion-beam conically etched carbon fibers with tip diameters ranging ca. from 100 to 500 nm. The polyaniline film was deposited from HCl solution containing the aniline monomer by cycling the potential between −0.2 and +1.0 V. The electromotive force (emf) signal between the pH sensitive polyaniline-coated nanoelectrode and an Ag/AgCl reference electrode was linear over the pH range of 2.0-12.5 with a slightly super-Nernstian slope of ca. −60 mV/pH unit. Response times ranged from several sec at pHs around 7 up to 2 min at pH 12.5. The proposed pH nanoelectrode displayed high ion selectivity with respect to K⁺, Na⁺, Ca²⁺, and Li⁺, with log K_H,M values around −12 and has a working lifetime of about 20 days. Key parameters important for the pH nanoelectrode performance, including polyaniline film preparation, selectivity, response time, temperature dependence, relative coating thickness, stability, and reproducibility, have been characterized and optimized. The performance of the pH nanoelectrode was examined by measuring the pH of several real samples including body fluids (serum, urine) and low ionic strength water samples (rain, deionized and tap water). The results agreed very well with those obtained by using commercial glass pH electrodes. The proposed pH nanoelectrode demonstrated attractive properties and seems particularly promising for use under physiological conditions.     

Synthesis and biological evaluation of 9‐thia‐5,10‐dideazafolic acid

The folate analogue, 9‐thia‐5,10‐dideazafolic acid ( 3b ), was obtained in an efficient two‐step procedure in an overall yield of 60%. The previously unknown intermediate dimethyl‐thiocarbamic acid S‐(2‐amino‐3,4‐dihydo‐4‐oxo‐pyrido[2,3‐d]pyrimidin‐6‐yl) ester ( 5 ) was prepared via the condensation of 2,6‐diamino‐3H‐pyrimidin‐4‐one and S‐(2‐malonaldehyde)‐1,1,3,3‐tetramethylthiouronium bromide ( 4 ). Compound 5 , in a one pot procedure, was deprotected using sodium hydroxide and then coupled to diethyl N‐[(4‐chloromethyl)benzoyl]‐L‐glutamate, followed by saponification of the ethyl esters to give the 9‐thia‐5,10‐dideazafolic acid ( 3b ). Compound 3b was a potent inhibitor of human 5‐aminoimidazole‐4‐carboxamide ribonucleotide transformylase (K_i of 8 ± 5 μM) and showed no inhibition of human glycinamide ribonu‐cleotide transformylase at concentrations as high as 50 μM. Compound 3b was screened by the National Cancer Institute Developmental Therapeutics Program against 60 human tumors and was found to be active against a leukemia RPMI‐8226 cell line where the LC₅₀ was 1 μM.     

Single molecule spectroscopy as a probe for dye-polymer interactions

Experimental (Single Molecule Spectroscopy) and theoretical (quantum-chemical calculations and Monte Carlo and molecular dynamics simulations) techniques are combined to investigate the behavior and dynamics of a polymer-dye molecule system. It is shown that the dye molecule of interest (1,1'-dioctadecyl-3,3,3',3'-tetramethylindo-dicarbocyanine) adopts two classes of conformations, namely planar and nonplanar ones, when embedded in a poly(styrene) matrix. From an in-depth analysis of the fluorescence lifetime trajectories, the planar conformers can be further classified according to the way their alkyl side chains interact with the surrounding poly(styrene) chains.     

Six-dimensional quantum dynamics of (v=0,j=0)D2 and of (v=1,j=0)H2 scattering from Cu111

We report six-dimensional quantum dynamics calculations of the dissociative scattering of molecular hydrogen from the copper111 surface. Two potential energy surfaces are investigated and the results are compared with experiment. Our study completes the preliminary work of Somers et al. [Chem. Phys. Lett. 360, 390 (2002)] and focuses on the role of initial vibrational excitation and on isotopic effects. None of the two investigated potential energy surfaces is found satisfactory: the use of neither potential yields reaction and vibrational excitation probabilities and vibrational efficacies that are in close agreement with experiment. In addition to showing the shortcomings of existing potential energy surfaces we point out an inconsistency in the experimental fits for D2.     

Internal rotation in peroxynitrous acid (ONOOH)

Using higher levels of wave-function-based electronic structure theory than previously applied, as well as density functional theory (B-LYP and B3-LYP functionals), all theoretical models conclude that three ONOOH conformers are stationary point minima, in disagreement with some of the previous studies that we survey. In order of increasing energy, these are the cis-cis, cis-perp, and trans-perp conformers. Basis sets including diffuse functions seem to be needed to obtain a qualitatively correct representation of the internal rotation potential energy surface at higher levels of theory. Internal rotation about the peroxide bond involving the cis-cis, cis-gauche transition structure (TS), cis-perp, and cis-trans TS conformers is studied in detail. To help ascertain the relative stability of the cis-perp conformer, multireference configuration interaction energy calculations are carried out, and rule of thumb estimates of multireference character in the ground-state wave functions of the ONOOH conformers are considered. CCSD(T)/aug-cc-pVTZ physical properties (geometries, rotational constants, electric dipole moments, harmonic vibrational frequencies, and infrared intensities) are compared with the analogous experimental data wherever possible, and also with density functional theory. Where such experimental data are nonexistent, the CCSD(T) and B3-LYP results are useful representations. For example, the electric dipole moment |mu(e)| of the cis-cis conformer is predicted to be 0.97+/-0.03 D. CCSD(T) energies, extrapolated to the aug-cc-pVNZ limit, are employed in isodesmic reaction schemes to derive zero Kelvin heats of formation and bond dissociation energies of the ONOOH stationary point minima. In agreement with recent gas-phase experiments, the peroxide bond dissociation energies of the cis-cis and trans-perp conformers are calculated as 19.3+/-0.4 and 16.0+/-0.4 kcalmol, respectively. The lowest energy cis-cis conformer is less stable than nitric acid by 28.1+/-0.4 kcalmol at 0 K.     

Separation of the enantiomers of phenprocoumon and warfarin by high-performance liquid chromatography using a chiral stationary phase. Determination of the enantiomeric ratio of phenprocoumon in human plasma and urine

The enantiomers of the chiral coumarin-type anticoagulants phenprocoumon, warfarin and p-chlorophenprocoumon were separated by high-performance liquid chromatography on a chiral stationary phase (Nucleosil-Chiral 2) and normal-phase conditions. Chromatographic peak identification was performed with authentic reference compounds of the enantiomers and on-line UV spectra comparison. This method was applied to the determination of the enantiomeric ratio of phenprocoumon in plasma and urine extracts from patients under racemic drug therapy. The limit of detection (50 and 80 ng/ml) and precision (less than 5%) of the method are adequate for pharmacokinetic and enantioselective disposition studies, respectively, of phenprocoumon. No racemization was detected during the extraction procedures.