Statistical approach for risk assessment of aflatoxin sampling plan used by manufacturers for raw shelled peanuts

Processed food manufacturers often use acceptance sampling plans to screen out lots with unacceptable levels of contamination from incoming raw material streams. Sampling plan designs are determined by specifying sample sizes, sample preparation methods, analytical test methods, and accept/reject criteria. Sampling plan performance can be indicated by plotting acceptance probability versus contamination level as an operating characteristic (OC) curve. In practice, actual plan performance depends on the level of contamination in the incoming lot stream. This level can vary considerably over time, among different crop varieties, and among locales. To better gauge plan performance, a method of coupling an OC curve and crop distributions is proposed. The method provides a precise probabilistic statement about risk and can be easily performed with commercial spreadsheet software.     

Glycyl C(alpha) chemical shielding in tripeptides: measurement by solid-state NMR and correlation with X-ray structure and theory

We report here (13)C(alpha) chemical shielding parameters for central Gly residues in tripeptides adopting alpha-helix, beta-strand, polyglycine II, and fully extended 2 degrees structures. To assess experimental uncertainties in the shielding parameters and the effects of (14)N-(13)C(alpha) or (15)N-(13)C(alpha) dipolar coupling, stationary and magic angle spinning (MAS) spectra with and without (15)N decoupling were obtained from natural abundance and double-labeled samples containing [2-(13)C, (15)N]Gly. We find that accurate (<1 ppm uncertainty) shielding parameters are measured with good sensitivity and resolution in (15)N decoupled 1D or 2D MAS spectra of double-labeled samples. Compared to variations of isotropic shifts with peptide angles, those of (13)C(alpha) shielding anisotropy and asymmetry are greater. Trends relating shielding parameters to the 2 degrees structure are apparent, and the correlation of the experimental values with unscaled ab initio shielding calculations has an rms error of 3 ppm. Using the experimental data and the ab initio shielding values, the empirical trends relating the 2 degrees structure to shielding are extended to the larger range of torsion angles found in proteins.     

An efficient modification of ellipticine synthesis and preparation of 13-hydroxyellipticine

A simple modification of a previously published ellipticine synthesis is reported, which decreases the reaction time and increases the yield and purity of the product. Benzylic oxidations of 1,4-dimethylcarbazole and ellipticine derivatives were studied and 13-hydroxyellipticine was prepared.     

Rapid screening of selective serotonin re-uptake inhibitors in urine samples using solid-phase microextraction gas chromatography–mass spectrometry

In this paper a solid-phase microextraction–gas chromatography–mass spectrometry (SPME–GC–MS) method is proposed for a rapid analysis of some frequently prescribed selective serotonin re-uptake inhibitors (SSRI)—venlafaxine, fluvoxamine, mirtazapine, fluoxetine, citalopram, and sertraline—in urine samples. The SPME-based method enables simultaneous determination of the target SSRI after simple in-situ derivatization of some of the target compounds. Calibration curves in water and in urine were validated and statistically compared. This revealed the absence of matrix effect and, in consequence, the possibility of quantifying SSRI in urine samples by external water calibration. Intra-day and inter-day precision was satisfactory for all the target compounds (relative standard deviation, RSD, <14%) and the detection limits achieved were <0.4 ng mL^–1 urine. The time required for the SPME step and for GC analysis (30 min each) enables high throughput. The method was applied to real urine samples from different patients being treated with some of these pharmaceuticals. Some SSRI metabolites were also detected and tentatively identified.     

Sensitive LC MS quantitative analysis of carbohydrates by Cs<Superscript>+</Superscript> attachment

The development of a sensitive assay for the quantitative analysis of carbohydrates from human plasma using LC/MS/MS is described in this paper. After sample preparation, carbohydrates were cationized by Cs(+) after their separation by normal phase liquid chromatography on an amino based column. Cesium is capable of forming a quasi-molecular ion [M + Cs](+) with neutral carbohydrate molecules in the positive ion mode of electrospray ionization mass spectrometry. The mass spectrometer was operated in multiple reaction monitoring mode, and transitions [M + 133] --> 133 were monitored (M, carbohydrate molecular weight). The new method is robust, highly sensitive, rapid, and does not require postcolumn addition or derivatization. It is useful in clinical research for measurement of carbohydrate molecules by isotope dilution assay.     

Octylgermane on gold: synthesis, oxidation, and pattern formation

Chemisorbed monolayers of octylgermane (C8H17GeH3) on gold have been formed by vapor deposition in ultrahigh vacuum. The monolayer has been characterized by X-ray photoelectron and reflection absorption infrared spectroscopies (XPS and RAIRS) and scanning tunneling microscopy (STM). XPS data indicate the monolayer can be oxidized by exposure to ozone. STM images exhibit a complex pattern which can be modeled as strain-mediated spinodal decomposition.     

Modeling and simulation of free radical polymerization of styrene under semibatch reactor conditions

The first part of this approach is concerned with the elaboration of a radical polymerization model of styrenne, based on a kinetic diagram that includes chemical and thermal initiation, propagation, termination by recombination and chain transfer to the monomer. Furthermore, volume contraction during polymerization is considered, as well as the gel and glass effects. The mathematical formalism that describes the model in terms of moments is explored in detail. The model was then used to predict the changes in monomer conversion and molecular weight after intermediate addition of initiator and monomer. The results of this operation are dependent on the conditions of the reaction mass, quantity, and moment of substance addition. Therefore, the simulations were performed at different times with respect to the gel effect; before, during and after this phenomenon, and also with respect to different temperatures and initiators. Increasing the initiator concentration before the gel effect leads to an earlier appearance of the phenomenon and to a decrease in molecular weight. The ratio reveals a polydispersity index smaller for the intermediate addition of initiator. No significant changes take place during or after the gel effect. If along with the initiator, unreacted monomver (used to dissolve the initiator) enters the reactor, a small dip in conversion is observed. The general conclusion of this paper reveals the intermediate addition of initiator as a method to control polymer properties and to prevent the “dead-end” polymerization of styrene.     

Glycoprotein synthesis as a function of epithelial cell arrangement: biosynthesis and release of glycoproteins by human breast and prostate cells in organ culture.

We demonstrate that a technique is available to investigate glycoprotein synthesis in organ cultures of human breast and prostate surgical specimens where the 3-dimensional epithelial cell arrangement remains intact. Malignant breast and prostate epithelium maintained their capacity to synthesize glycoproteins for at least 3 days as followed by the incorporation of [3H]glucosamine into macromolecules. Over 70% of incorporation was by malignant cells as judged by autoradiography. Labeled glycoproteins were released into glandular lumina and consequently into the culture fluid. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis revealed predominantly one group of macrmolecules released with an apparent molecular weight of 48,000 +/- 6,000 daltons. This glycoprotein was found in all of the breast specimens studied, which included 1 medullary, 1 infiltrating lobular, and 8 infiltrating duct carcinomas. The pattern was independent of the availability of estrogen receptors. A similar glycoprotein was also observed in the culture media from a Grade I and a Grade II well-differentiated infiltrating prostate carcinoma. Incorporation was below the level of detection in 4 of 6 cases of benign prostatic hyperplasia. A more complex pattern of labeled glycoproteins was found in the media of a Grade II and a Grade III poorly-differentiated prostate carcinoma. The established human mammary carcinoma cell line MCF-7 synthesized and released a similar 48,000 molecular weight glycoprotein but additional components with larger molecular weights were also released. An intriguing interpretation that 3-dimensional tissue integrity restricts some glycoprotein synthesis is discussed. Cells grown in 2-dimensional monolayers could escape from such a topographic restriction and express additional families of glycoproteins.     

Organoruthenaborane Chemistry. X. The SM2-catalysed formation of [ l-(η6-C6Me6)-isocloso-RuB9H9], and some B-phenylamino derivatives. NMR and X-ray diffraction studies

The action of SMe₂ on the ten-vertex nido-ruthenaborane [6-(η⁶-C₆Me₆)RuB₉H_l3] ( 1 ) provides a high-yield route to the unsubstituted isocloso-ruthenaborane [1-(η⁶-C₆Me₆)RuB₉H₉] (2). The benzene analogue [1-(η⁶-C₆Me₆)RuB₉H₉] is prepared similarly. By contrast, reaction of (1) with PhNH₂ gives a variety of B-phenylamino isocloso derivatives, including orange crystals of [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB 9 H₈] ( 3 ), red-orange [1-(η⁶-C₆Me₆)-2,3-(PhNH)₂-isocloso-1-RuB₉H₇] ( 4 ) and dark-red [1-(η⁶-C₆Me₆)-5,6,7-(PhNH)₃-isocloso-1-RuB₉H₆] ( 5 ). Detailed ¹H and ¹¹B nmr properties of these various compounds are described. The structure of ( 3 ) has been established by a single-crystal X-ray diffraction study of the solvate [1-(η⁶-C₆Me₆)-2-(PhNH)-isocloso-1-RuB₉H₈] · 1/2 CH₂Cl₂; the crystals were monoclinic, space group C2/c, with a = 1895.1(3), b = 1556.6(3), c = 1716.4(3) pm, β = 104.37(1)° and z = 8.     

Novel M(II)–Hg(II) coordination polymers generated from metal-containing building blocks M(2-pyrazinecarboxylate)2 · (H2O)2 (M=Cu, Ni, Co) and HgCl2

A new class of M(II)–Hg(II) (M=Cu(II), Co(II), Ni(II)) mixed-metal coordination polymers, Cu(2-pyrazinecarboxylate)₂HgCl₂ (4), [Co(2-pyrazinecarboxylate)₂(HgCl₂)₂] · 0.61H₂O (5) and [Ni(2-pyrazinecarboxylate)₂(HgCl₂)₂] · 0.77H₂O (6), have been prepared by self assembly of metal-containing building blocks, M(2-pyrazinecarboxylate)₂ · (H₂O)₂(M=Cu(II), Co(II), Ni(II)), with HgCl₂. Compounds 4–6 were characterized fully by IR, elemental analysis and single crystal X-ray diffraction. Compound 4 crystallized in the monoclinic space group C2/c, with a=17.916(5) Å, b=7.223(2) Å, c=13.335(4) Å, β=128.726(3)°, V=1346.2(6) ų, Z=4. It contains alternating Hg(II) and Cu(II) metal centers that are cross-linked by 2-pyrazinecarboxylate spacers and chlorine co-ligands to generate a unique three-dimensional Hg(II)–Cu(II) mixed metal framework. Compound 5 crystallized in the triclinic space group P , with a=6.3879(7) Å, b=6.6626(8) Å, c=13.2286(15) Å, α=96.339(2)°, β=91.590(2)°, γ=113.462(2)°, V=511.71(10) ų, Z=1. Compound 6 also crystallized in the triclinic space group P , with a=6.3543(8) Å, b=6.6194(8) Å, c=13.2801(16) Å, α=96.449(2)°, β=92.263(2)°, γ=113.541(2)°, V=506.67(11) ų, Z=1. Compounds 5 and 6 are isostructural and in the solid state the Hg(II)M(II)Hg(II) units are connected by Hg₂Cl₂ linkages to produce a novel M(II)–Hg(II) (M=Co(II), Ni(II)) zigzag mixed-metal chain, in which a new type of M–M′–M′–M array was observed. The metal containing building blocks, M(2-pyrazinecarboxylate)₂ · (H₂O)₂ (M=Cu(II), Co(II), Ni(II)), exhibit different connectivities to HgCl₂ depending on the metal cation contained within them.