Zirconium(IV)-porphyrins as novel ionophores for fluoride-selective polymeric membrane electrodes

The feasibility of using Zr(IV)-porphyrins as novel ionophores for preparing anion-selective polymeric membrane electrodes is examined. Electrodes constructed using o-nitrophenyl octyl ether plasticized poly(vinyl chloride) membranes containing Zr(IV)-octaethylporphyrin (OEP) dichloride (Zr(IV)[OEP]Cl₂) or Zr(IV)-tetraphenylporphyrin (TPP) dichloride (Zr(IV)[TPP]Cl₂) were found to exhibit enhanced potentiometric selectivity toward fluoride compared to electrodes based on a typical anion-exchanger (e.g. tridodecylmethylammonium chloride). At pH 5.5, the electrodes displayed the following selectivity sequences: ClO₄⁻ > SCN⁻ > I⁻ > F⁻ > NO₃⁻ > Br⁻ > NO₂⁻ > Cl⁻ and F⁻ > ClO₄⁻ > SCN⁻ > I⁻ > NO₂⁻ > NO₃⁻ > Br⁻ > Cl⁻ for membranes doped with Zr(IV)[OEP]Cl₂) and Zr(IV)[TPP]Cl₂, respectively. Both ionophores are shown to operate via a charged carrier mechanism, with 10 mol% of lipophilic tetraphenylborate derivative in the membrane phase required to achieve optimal selectivity. Electrodes prepared with both metalloporphyrin species display super-Nernstian response toward fluoride with slopes typically greater than −100 mV per decade. It is shown, via UV-VIS spectroscopy of the membrane phase, that this behavior occurs due to spontaneous formation of hydroxide ion bridged porphyrin dimers in the membrane in the presence of the lipophilic anionic additive. The dimers are easily converted to monomeric species upon increasing the concentration of fluoride in the sample solution. Decreasing the pH of sample buffer background solution (from pH 5.5 to pH 3) decreases the lower detection limit (DL) of the electrode response toward fluoride (by two-order of magnitude) and improves the electrodes’ selectivity.     

Multifold curdlan gel formation by dialysis into aqueous solutions of metal salts

We have found that the dialysis of curdlan dissolved in alkaline solution into aqueous solutions of metal salts yielded multifold gel structures. Aqueous sodium chloride and potassium chloride as well as pure water induced isotropic gels. Aqueous calcium salts induced liquid crystalline gel with refractive index gradient/amorphous gel alternative structure. Aqueous salts of trivalent aluminum and ferric cations induced a rigid liquid crystalline gel, which shrank above a threshold concentration of each salt. On the other hand, Liesegang ring-like pattern was observed with aqueous solutions of mixed salts of calcium chloride and magnesium chloride. The patterns have been classified to discuss the mechanism of forming the variety of structures.     

Direct qualitative analysis of triacylglycerols by electrospray mass spectrometry using a linear ion trap

Triacylglycerols (TAGs) isolated from a biological sample provide a challenge for mass spectrometric analysis because of the complexity of naturally occurring TAGs, which may contain different fatty acyl substituents resulting in a large number of molecular species having the identical elemental composition. We have investigated the use of mass spectrometry to obtain unambiguous information as to the individual TAG molecular species present in a complex mixture of triacylglycerols using a linear ion trap mass spectrometer. Ammonium adducts of TAGs, [M+NH4]+, were generated by electrospray ionization, which permitted the molecular weight of each TAG molecular species to be determined. The mechanisms involved in the decomposition of the [M+NH4]+ and subsequent fragment ions were investigated using deuterium labeling, MS/MS, and MS3 experiments. Collision induced decomposition of [M+NH4]+ ions resulted in the neutral loss of NH3 and an acyl side-chain (as a carboxylic acid) to generate a diacyl product ion. MS/MS data were used to identify each acyl group present for a given [M+NH4]+ ion, and this information could be combined with molecular weight data to identify possible TAG molecular species present in a biological extract. Subsequent MS3 experiments on the resultant diacyl product ions, which gave rise to acylium (RCO+) and related ions, enabled unambiguous TAG molecular assignments. These strategies of MS, MS/MS, and MS3 experiments were applied to identify components within a complex mixture of neutral lipids extracted from RAW 264.7 cells.     

On-line preconcentration and determination of mercury in biological samples by flow injection vapour generation inductively coupled plasma atomic emission spectrometry

An FI-ICP-AES method for the determination of trace levels of mercury in biological samples has been described, which is based on the extraction of the mercury complex with 1,5-bis (di-2-pyridyl)methylene thiocarbonohydrazide (DPTH) on-line into isobuthyl-methyl ketone (IBMK). The organic phase (containing the complex) has been mixed on-line with SnCl₂ in N,N-dimethylformamide. Thus, mercury vapour can be generated directly from the organic phase and separated in a gas-liquid separation device. The detection limit for mercury is 4 ng/ml and the calibration curve is linear at least from 10 to 2500 ng/ml. The relative standard deviation for 10 replicate measurements is ±1% for 100 ng/ml of Hg(II). Results from the analysis of some certified biological reference materials are given.     

Femtosecond Spectroscopic Studies on the Red Light-Absorbing Form of Oat Phytochrome and 2,3-Dihydrobiliverdin

Abstract— The excited state behavior of the red light-absorbing form of phytochrome (Pr) was studied on the femtosecond time scale. After excitation of Pr with 75 fs laser pulses at 616 nm the kinetics of the transient absorption changes was recorded at selected wavelengths probing mainly the bleaching of the Pr ground-state absorption and the stimulated emission. The kinetic data obtained indicate the population of an excited state with a 3 ps lifetime immediately after excitation. This state precedes the formation of another excited state with a 32 ps lifetime. The decay of the latter state is followed by the appearance of a first product state that is assumed to represent lunii-R. In addition, 2,3-dihydrobiliverdin, which is considered to be an adequate model of the Pr chro-mophore, was included in the femtosecond studies. The absorption difference spectra recorded at various delay times show an immediate bleaching of the ground-state absorption. Simultaneously with bleaching a broad transient absorption appears between 410 and 525 nm. The data analysis yields similar kinetic components as they were observed in the decay of Pr. It is suggested from this finding that within the first tens of picoseconds after excitation the excited-state properties of Pr are mainly determined by the properties of the chromophore itself.     

Behavior of rifampicin in association with<Emphasis Type="Italic"> β</Emphasis>-cyclodextrin in aqueous media: a spectroscopic and conductometric study

The behavior of rifampicin (D) with -cyclodextrin (-CyD) in aqueous media (W) has been examined by means of UV-vis spectroscopy and conductivity measurements over the temperature range 15–30 °C. The UV-vis study has been used to characterize the systems. The estimated molar absorption coefficient for D/CyD/W system was 10757±280 M^–1 cm^–1 in comparison to the value of 6133±99 M^–1 cm^–1 for D/W system. The conductivity was measured (i) as a function of [D] for binary D/W systems, (ii) as a function of [CyD], keeping the concentration of drug constant, for D/CyD/W system, and (iii) as a function of [D] in the presence of a constant cyclodextrin concentration. Two transition points were observed for D/CyD/W system at constant [CyD], which were assigned as cac-1 and cac-2. The stoichiometry of the association was estimated from the conductivity data. This was obtained from [drug] value at which the change in slope of occurs. The standard free energy change, of aggregation was also calculated from the critical concentration data. An attempt has also been made to estimate the stoichiometry of -cyclodextrin:rifampicin association.     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

Identification of diastereomeric chlorophyll allomers by atmospheric pressure chemical ionisation liquid chromatography/tandem mass spectrometry

Atmospheric pressure chemical ionisation liquid chromatography/mass spectrometry (APCI-LC/MS) has been used for identification of the epimers of hydroxy, methoxy and methoxylactone allomers of chlorophyll a (13(2)-HO-chl a, 13(2)-MeO-chl a and 15(1)-MeO-lact-chl a), the hydroxy allomer of bacteriochlorophyll a (13(2)-HO-bchl a) and the hydroxy and methoxylactone allomers of bacterioviridin a (13(2)-HO-bvir a and 15(1)-MeO-lact-bvir a). The APCI mass spectra show that facile fragmentations involve the methoxyl or hydroxyl groups at the C-13(2) or C-15(1) chiral centres. Losses involving the C-13(2) or C-15(1) hydroxyl or methoxyl groups occur more easily from the S-epimer than from the R-epimer due to the greater relief of the steric strain associated with interaction with the bulky C-17 substituent. The differences in mass spectrometric fragmentation can be used as a diagnostic tool for the assignment of the stereochemical configuration at the C-13(2) or C-15(1) chiral centres.     

Synthesis of an isomer of the germacranolide isoaristolactone

Photocycloadditlon of (+)-isoplperltenone and cyclobutene-1-carboxylic acid gives an adduct which upon reduction with NaCNBH₃ followed by thermolysis yields an isomer of isoaristolactone in an overall yield of 26%.     

Preparative high-performance liquid chromatography of peptides on a new reversed-phase packing material, Kromasil C18

Preparative reversed-phase high-performance liquid chromatography has found wide use in the production of peptides for pharmaceutical formulations. Purity of the substance and overall economy of the chromatographic system are the most important criterias. In this sense optimized, silica particles and production process with capability to separately control parameters important to chromatography, are essential to high-performance chromatography. Kromasil C18 packing material was tested and evaluated in respect of its selectivity, flow and pressure properties, resolution, load capacity, recovery, adsorption effects, mechanical strength and chemical degradation.