Modeling the effects of interband and intraband transitions on phase and gain stabilities of quantum dot semiconductor optical amplifiers

In this paper, the effects of interband and intraband transitions on the gain and phase stabilities in quantum dot semiconductor optical amplifier (QD-SOA) are investigated both temporally and spectrally employing electrical and optical pumping schemes. For this purpose, the carrier rate equations in different energy states coupled to the traveling wave optical field equation have been numerically solved to derive the dynamical behavior of QD-SOA. Our results show that the gain and phase response can be stabled under optical pumping (OP) scheme because the role of the interband and intraband transitions on the dynamics of QD-SOA is reduced. This behavior leads to high-speed pattern effect-free cross-phase modulation (XPM) in QD-SOA. It is found that optically pumped QD-SOA can have high performance in phase based applications. Moreover, it is shown that under OP scheme although the QD-SOA has lower gain value and slower gain recovery time, the ultrafast cross-gain modulation (XGM) without pattern effect is possible and the phase is recovered within a shorter time compared to EP scheme. The behavior arises from the different capacity of the carrier reservoir for pumping schemes.     

Dispersion behavior of electromagnetic wave near the resonance in 1D magnetized ferrite photonic crystals

In the present article, we have analyzed the dispersion of electromagnetic wave in the one dimensional magnetized ferrite photonic crystals near the resonance in the permeability of the constituent materials for transverse magnetization in the transverse electric mode. The dispersion relation is obtained by transfer matrix method. It is observed that in the vicinity of resonant frequency, large numbers of oscillations occur in the normalized Bloch wave number. These oscillations in the Bloch wave number are strongly dependent on external magnetic fields, filling factor, and damping constant. The frequency regime of these oscillations is found to be shifted in higher frequency range with increase in the magnitude of the magnetic fields. With increase in the filling factor keeping length of periods fixed, number of oscillations is found to be increased. Near the resonance, effect of incident angle is negligible. It is demonstrated that these nearly equidistant oscillations occurring in the vicinity of resonance may be used for making filter in micro wave frequency range.     

Broadband LWIR and MWIR absorber by trapezoid multilayered grating and SiO<Subscript>2</Subscript> hybrid structures

A broadband metamaterial absorber with high absorption simultaneously in mid-wave infrared (MWIR) and long-wave infrared (LWIR) was proposed. In the MWIR, the absorption higher than 0.8 is from 4 to 6.3 µm, while the absorption in the LWIR is from 8.7 and 9.6 µm. The absorber is insensitive to the incident angle. The broadband absorption in the MWIR is due to the slow-light effect of the trapezoid multilayered grating structure. And the broadband absorption in the LWIR is due to the phonon polariton resonant of trapezoid SiO₂ layer. In the broadband high absorption region, the atmosphere is transparent, which may greatly promote the practical application of the absorber in double-color IR imaging, detecting, infrared stealth and thermal emitting.     

Quantum non-demolition phonon counter with a hybrid optomechnical system

A phonon counting scheme based on the control of polaritons in an optomechanical system is proposed. This approach permits us to measure the number of phonons in a quantum non-demolition (QND) manner for arbitrary modes not limited by the frequency matching condition as in usual photon-phonon scattering detections. The performance on phonon number transfer and quantum state transfer of the counter are analyzed and simulated numerically by taking into account all relevant sources of noise.     

Traversable braneworld wormholes supported by astrophysical observations

In this study, we investigate the characteristics and properties of a traversable wormhole constrained by the current astrophysical observations in the framework of modified theories of gravity (MOG). As a concrete case, we study traversable wormhole space–time configurations in the Dvali–Gabadadze–Porrati (DGP) braneworld scenario, which are supported by the effects of the gravity leakage of extra dimensions. We find that the wormhole space–time structure will open in terms of the 2σ confidence level when we utilize the joint constraints supernovae (SNe) Ia + observational Hubble parameter data (OHD) + Planck + gravitational wave (GW) and z < 0:2874. Furthermore, we obtain several model-independent conclusions, such as (i) the exotic matter threading the wormholes can be divided into four classes during the evolutionary processes of the universe based on various energy conditions; (ii) we can offer a strict restriction to the local wormhole space–time structure by using the current astrophysical observations; and (iii) we can clearly identify a physical gravitational resource for the wormholes supported by astrophysical observations, namely the dark energy components of the universe or equivalent space–time curvature effects from MOG. Moreover, we find that the strong energy condition is always violated at low redshifts.     

On the improvement of signal repeatability in laser-induced air plasmas

The relatively low repeatability of laser-induced breakdown spectroscopy (LIBS) severely hinders its wide commercialization. In the present work, we investigate the optimization of LIBS system for repeatability improvement for both signal generation (plasma evolution) and signal collection. Timeintegrated spectra and images were obtained under different laser energies and focal lengths to investigate the optimum configuration for stable plasmas and repeatable signals. Using our experimental setup, the optimum conditions were found to be a laser energy of 250 mJ and a focus length of 100 mm. A stable and homogeneous plasma with the largest hot core area in the optimum condition yielded the most stable LIBS signal. Time-resolved images showed that the rebounding processes through the air plasma evolution caused the relative standard deviation (RSD) to increase with laser energies of > 250 mJ. In addition, the emission collection was improved by using a concave spherical mirror. The line intensities doubled as their RSDs decreased by approximately 25%. When the signal generation and collection were optimized simultaneously, the pulse-to-pulse RSDs were reduced to approximately 3% for O(I), N(I), and H(I) lines, which are better than the RSDs reported for solid samples and showed great potential for LIBS quantitative analysis by gasifying the solid or liquid samples.     

Exotic ferromagnetism in the two-dimensional quantum material C<Subscript>3</Subscript>N

The search for and study of exotic quantum states in novel low-dimensional quantum materials have triggered extensive research in recent years. Here, we systematically study the electronic and magnetic structures in the newly discovered two-dimensional quantum material C₃N within the framework of density functional theory. The calculations demonstrate that C₃N is an indirect-band semiconductor with an energy gap of 0.38 eV, which is in good agreement with experimental observations. Interestingly, we find van Hove singularities located at energies near the Fermi level, which is half that of graphene. Thus, the Fermi energy easily approaches that of the singularities, driving the system to ferromagnetism, under charge carrier injection, such as electric field gating or hydrogen doping. These findings not only demonstrate that the emergence of magnetism stems from the itinerant electron mechanism rather than the effects of local magnetic impurities, but also open a new avenue to designing field-effect transistor devices for possible realization of an insulator–ferromagnet transition by tuning an external electric field.     

Ultrathin nanosheets of Mn<Subscript>3</Subscript>O<Subscript>4</Subscript>: A new two-dimensional ferromagnetic material with strong magnetocrystalline anisotropy

Two-dimensional (2D) materials with robust ferromagnetism have played a key role in realizing nextgeneration spin-electronic devices, but many challenges remain, especially the lack of intrinsic ferromagnetic behavior in almost all 2D materials. Here, we highlight ultrathin Mn₃O₄ nanosheets as a new 2D ferromagnetic material with strong magnetocrystalline anisotropy. Magnetic measurements along the in-plane and out-of-plane directions confirm that the out-of-plane direction is the easy axis. The 2D-confined environment and Rashba-type spin-orbit coupling are thought to be responsible for the magnetocrystalline anisotropy. The robust ferromagnetism in 2D Mn₃O₄ nanosheets with magnetocrystalline anisotropy not only paves a new way for realizing the intrinsic ferromagnetic behavior in 2D materials but also provides a novel candidate for building next-generation spin-electronic devices.     

All-dielectric bowtie waveguide with deep subwavelength mode confinement

Plasmonic waveguides and conventional dielectric waveguides have favorable characteristics in photonic integrated circuits. Typically, plasmonic waveguides can provide subwavelength mode confinement, as shown by their small mode area, whereas conventional dielectric waveguides guide light with low loss, as shown by their long propagation length. However, the simultaneous achievement of subwavelength mode confinement and low-loss propagation remains limited. In this paper, we propose a novel design of an alldielectric bowtie waveguide, which simultaneously exhibits both subwavelength mode confinement and theoretically lossless propagation. Contrary to traditional dielectric waveguides, where the guidance of light is based on total internal reflection, the principle of the all-dielectric bowtie waveguide is based on the combined use of the conservation of the normal component of the electric displacement and the tangential component of the electric field, such that it can achieve a mode area comparable to its plasmonic counterparts. The mode distribution in the all-dielectric bowtie waveguide can be precisely controlled by manipulating the geometric design. Our work shows that it is possible to achieve extreme light confinement by using dielectric instead of lossy metals.