Application of ultrasound‐assisted liquid–liquid microextraction coupled with gas chromatography and mass spectrometry for the rapid determination of synthetic cannabinoids and metabolites in biological samples

The constant emergence of new psychoactive substances is a challenge to clinical and forensic toxicologists who need to constantly update analytical techniques to detect them. A large portion of these substances are synthetic cannabinoids. The aim of this study was to develop a rapid and simple method for the determination of synthetic cannabinoids and their metabolites in urine and blood using gas chromatography–mass spectrometry. The method involves an ultrasound‐assisted dispersive liquid–liquid microextraction that implies a rapid procedure, giving excellent extraction efficiencies with minimal use of toxic solvents. This is followed by silylation and analysis with gas chromatography–mass spectrometry. The chromatographic method allows for the separation and identification of 29 selected synthetic cannabinoids and some metabolites. The method was validated on urine and blood samples with the ability to detect and quantify all analytes with satisfactory limits of detection (from 1 to 5 ng/mL), limits of quantification (5 ng/mL), and selectivity and linearity (in the range of 5–200 ng/mL). The developed assay is highly applicable to laboratories with limited instrumental availability, due to the use of efficient and low‐cost sample preparation and instrumental equipment. The latter may contribute to enhance the detection of new psychoactive substances in clinical and forensic toxicology laboratories.     

From Quantum Probabilities to Quantum Amplitudes

The task of reconstructing the system’s state from the measurements results, known as the Pauli problem, usually requires repetition of two successive steps. Preparation in an initial state to be determined is followed by an accurate measurement of one of the several chosen operators in order to provide the necessary “Pauli data”. We consider a similar yet more general problem of recovering Feynman’s transition (path) amplitudes from the results of at least three consecutive measurements. The three-step histories of a pre- and post-selected quantum system are subjected to a type of interference not available to their two-step counterparts. We show that this interference can be exploited, and if the intermediate measurement is “fuzzy”, the path amplitudes can be successfully recovered. The simplest case of a two-level system is analysed in detail. The “weak measurement” limit and the usefulness of the path amplitudes are also discussed.     

Total Synthesis of Pyrolaside B: Phenol Trimerization through Sequenced Oxidative C−C and C−O Coupling

A facile method to oxidatively trimerize phenols using a catalytic aerobic copper system is described. The mechanism of this transformation was probed, yielding insight that enabled cross‐coupling trimerizations. With this method, the natural product pyrolaside B was synthesized for the first time. The key strategy used for this novel synthesis is the facile one‐step construction of a spiroketal trimer intermediate, which can be selectively reduced to give the natural product framework without recourse to stepwise Ullmann‐ and Suzuki‐type couplings. As a result, pyrolaside B can be obtained expeditiously in five steps and 16 % overall yield. Three other analogues were synthesized, thus highlighting the utility of the method, which provides new accessibility to this area of chemical space. A novel xanthene was also synthesized through controlled Lewis acid promoted rearrangement of a spiroketal trimer.     

Elemental Chemometrics as Tools to Depict Stalked Barnacle (Pollicipes pollicipes) Harvest Locations and Food Safety

The stalked barnacle Pollicipes pollicipes is an abundant species on the very exposed rocky shore habitats of the Spanish and Portuguese coasts, constituting also an important economical resource, as a seafood item with high commercial value. Twenty-four elements were measured by untargeted total reflection X-ray fluorescence spectroscopy (TXRF) in the edible peduncle of stalked barnacles sampled in six sites along the Portuguese western coast, comprising a total of 90 individuals. The elemental profile of 90 individuals originated from several geographical sites (N = 15 per site), were analysed using several chemometric multivariate approaches (variable in importance partial least square discriminant analysis (VIP-PLS-DA), stepwise linear discriminant analysis (S-LDA), linear discriminant analysis (LDA), random forests (RF) and canonical analysis of principal components (CAP)), to evaluate the ability of each approach to trace the geographical origin of the animals collected. As a suspension feeder, this species introduces a high degree of background noise, leading to a comparatively lower classification of the chemometric approaches based on the complete elemental profile of the peduncle (canonical analysis of principal components and linear discriminant analysis). The application of variable selection approaches such as the VIP-PLS-DA and S-LDA significantly increased the classification accuracy (77.8% and 84.4%, respectively) of the samples according to their harvesting area, while reducing the number of elements needed for this classification, and thus the background noise. Moreover, the selected elements are similar to those selected by other random and non-random approaches, reinforcing the reliability of this selection. This untargeted analytical procedure also allowed to depict the degree of risk, in terms of human consumption of these animals, highlighting the geographical areas where these delicacies presented lower values for critical elements compared to the standard thresholds for human consumption.     

Reversible addition–fragmentation chain transfer polymerization of alkyl‐2‐cyanoacrylates: An assessment of livingness

Alkyl 2‐cyanoacrylates (CAs) are primarily used as instant adhesives, including those sold under the Loctite brand. The adhesive action can be inhibited with acid stabilizers allowing radical polymerization to be employed. The following article details the first attempted controlled/living radical polymerization of alkyl CAs: Reversible addition fragmentation chain transfer (RAFT) polymerization mediated by a poly(methyl methacrylate) dithiobenzoate macroRAFT agent for three different CA monomers (ethyl 2‐cyanoacrylate, n‐butyl 2‐cyanoacrylate, and 2‐phenylethyl cyanoacrylate) allowed the preparation of the first block copolymers of this challenging but commercially important monomer class. Nevertheless, GPC with UV detection indicated significant loss of the RAFT end‐group for all three CAs limiting control/living character. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1397–1408     

Vertical and nonvertical participation by sulfur,selenium, and tellurium

The mechanism of stabilization of positive charge on carbon by sulfur, selenium, or tellurium at the beta-position has been investigated kinetically, by measurement of rate enhancements, and structurally, by variation of the bond strength to the leaving group. Stabilization can occur either nonvertically with formation of a bridged intermediate or vertically through hyperconjugation within an open carbocation. We observed large rate enhancements (10(5) for S, 10(6) for Se) in 97% aqueous trifluoroethanol with trifluoroacetate as the leaving group. These enhancements are consistent with either mechanism. Product structures also are consistent with either mechanism. Nine crystal structures revealed that the bond to the leaving group (C-O) is lengthened by the presence of S or Se at the beta-position, in proportion to the basicity of the leaving group. This lengthening is not accompanied by angle distortions expected for the bridging mechanism. The crystallographic data support vertical (hyperconjugative) character along the reaction coordinate, more so for selenium than sulfur.     

Utility of calculated 13C NMR chemical shifts in differentiating conformational isomers: a study of metal-complexed and uncomplexed bispidines

Calculated 13C NMR chemical shifts were key to assigning the structures of the conformational forms of complexed and uncomplexed bispidine derivatives.     

Computer-aided design of chiral ligands. Part III. A novel ligand for asymmetric allylation designed using computational techniques

[reaction: see text] Computer-aided design protocols to identify new chiral ligands for reactions proceeding through well-defined transition states are outlined. Ligand families are discovered via computational screening of large structural databases such as the Cambridge Structural Database. Using this method, a novel cis-decalin ligand has been identified as a chiral auxiliary for the allylboration of aldehydes. Synthesis, resolution, and evaluation revealed that this new auxiliary provided the aldehyde facial approach upon which the design was predicated.     

Cu(II) complexes with heterocyclic substituted thiosemicarbazones: the case of 5-formyluracil. Synthesis,characterization, x-ray structures,DNA interaction studies,and biological activity

Two new 5-formyluracil thiosemicarbazone (H(3)ut) derivatives, Me-H(3)ut (1) and Me(2)-H(3)ut (2), were synthesized by reacting thiosemicarbazides, mono- and dimethylated on the aminic nitrogen, with 5-formyluracil and were subsequently characterized. These ligands, treated with copper chloride and nitrate, afforded three complexes: [Cu(Me-H(3)ut)Cl(2)].H(2)O (3), [Cu(Me(2)-H(3)ut)Cl(2)].H(2)O (4), and [Cu(Me-H(3)ut)(NO(3))(OH(2))(2)]NO(3) (5). The crystal structures of these complexes have been determined by single-crystal X-ray diffraction. In 3 and 4, a similar pentacoordination is present; the copper atom is surrounded by the ligand SNO donor atoms and by two chloride ions. The structure of 5 consists of [Cu(Me-H(3)ut)(NO(3))(OH(2))(2)](+) cations and nitrate anions. The copper coordination (4 + 2) involves the SNO ligand atoms and a water oxygen in the basal plane; the apical positions are occupied by a second water oxygen and by an oxygen of a monodentate nitrate group. Two biochemical techniques, namely DNA titration in the UV-vis region and thermal denaturation, have been employed to probe the details of DNA binding of these compounds. Analysis of the results suggests that our compounds are able to interact with DNA by electrostatic and groove binding but not by intercalation. The compounds have been also tested in vitro on human leukemic cell line U937, but they are not able to inhibit significantly cell proliferation.     

Natural-based plasticizers and biopolymer films: A review

In recent years, much attention has been focused on research to replace petroleum-based commodity plastics, in a cost-effective manner, with biodegradable materials offering competitive mechanical properties. Biopolymers have been considered as the most promising materials for this purpose. However, they generally present poor mechanical properties regarding processability and end-use application, since the fragility and brittleness exhibited during thermoformation can limit their potential for application. In order to overcome this problem, plasticizers are added to provide the necessary workability to biopolymers. This class of products became more visible when biodegradable additives and plasticizers also became the focus of material scientists. The use of natural and/or biodegradable plasticizers, with low toxicity and good compatibility with several plastics, resins, rubber and elastomers in substitution of conventional plasticizers, such as phthalates and other synthetic conventional plasticizers attracted the market along with the increasing worldwide trend towards use of biopolymers. Here we discuss the main results and developments in natural plasticizer/synthetic and biopolymer-based films during the last decades.