Effect of flow on polymer-polymer miscibility

The effect of shear flow on the phase behaviour of partially miscible blends exhibiting a lower critical solution temperature behaviour has been investigated. Miscibility limits were detected, with and without the application of flow, as changes from optical clarity to turbidity using light scattering and as the appearance of double glass transition temperatures. Light scattering data were collected on a rheo-optical device that was designed to monitor phase changes in polymer blends undergoing shear flow between parallel glass plates in a temperature controlled environment. Glass transition temperatures of some quenched sheared blends were measured using a differential scanning calorimeter in order to confirm the conclusions from the light scattering data. It was found that shear induced demixing and shear induced mixing may be observed within the same blend depending on the magnitude of the applied flow. Miscibility gaps and closed miscibility loops may appear in the phase diagrams. At certain temperatures and shear rates unusual scattering patterns were observed and these were associated with a “ripple” morphology when directly viewed through the microscope.     

“In situ” extraction of essential oils by use of Dean–Stark glassware and a Vigreux column inside a microwave oven: a procedure for teaching green analytical chemistry

One of the principal objectives of sustainable and green processing development remains the dissemination and teaching of green chemistry in colleges, high schools, and academic laboratories. This paper describes simple glassware that illustrates the phenomenon of extraction in a conventional microwave oven as energy source and a process for green analytical chemistry. Simple glassware comprising a Dean-Stark apparatus (for extraction of aromatic plant material and recovery of essential oils and distilled water) and a Vigreux column (as an air-cooled condenser inside the microwave oven) was designed as an in-situ extraction vessel inside a microwave oven. The efficiency of this experiment was validated for extraction of essential oils from 30 g fresh orange peel, a by-product in the production of orange juice. Every laboratory throughout the world can use this equipment. The microwave power is 100 W and the irradiation time 15 min. The method is performed at atmospheric pressure without added solvent or water and furnishes essential oils similar to those obtained by conventional hydro or steam distillation. By use of GC-MS, 22 compounds in orange peel were separated and identified; the main compounds were limonene (72.1%), β-pinene (8.4%), and γ-terpinene (6.9%). This procedure is appropriate for the teaching laboratory, does not require any special microwave equipment, and enables the students to learn the skills of extraction, and chromatographic and spectroscopic analysis. They are also exposed to a dramatic visual example of rapid, sustainable, and green extraction of an essential oil, and are introduced to successful sustainable and green analytical chemistry.     

Natural-based plasticizers and biopolymer films: A review

In recent years, much attention has been focused on research to replace petroleum-based commodity plastics, in a cost-effective manner, with biodegradable materials offering competitive mechanical properties. Biopolymers have been considered as the most promising materials for this purpose. However, they generally present poor mechanical properties regarding processability and end-use application, since the fragility and brittleness exhibited during thermoformation can limit their potential for application. In order to overcome this problem, plasticizers are added to provide the necessary workability to biopolymers. This class of products became more visible when biodegradable additives and plasticizers also became the focus of material scientists. The use of natural and/or biodegradable plasticizers, with low toxicity and good compatibility with several plastics, resins, rubber and elastomers in substitution of conventional plasticizers, such as phthalates and other synthetic conventional plasticizers attracted the market along with the increasing worldwide trend towards use of biopolymers. Here we discuss the main results and developments in natural plasticizer/synthetic and biopolymer-based films during the last decades.     

Synthesis and pharmacological evaluation of new 16-methyl pregnane derivatives

The pharmacological activity of several new pregnane derivatives 15-19 were determined on gonadectomized male hamster flank organs, seminal vesicles and in vitro conversion of testosterone (T) to dihydrotestosterone (DHT) as 5alpha-reductase inhibitors. Steroids 15-19 decreased the diameter of the pigmented spot in the flank organs as compared to the T treated animals; in this model, steroids 16 and 19 showed a higher activity than the commercially available finasteride 3. Injection of T increased the weight of the seminal vesicles. Compounds 15-19 when injected together with T decreased the weight of the seminal vesicles thus showing an antiandrogenic effect. The trienone 19 exhibited a considerably higher activity than finasteride. Steroids 15-19 inhibited the in vitro metabolism of [3H]T to [3H]DHT in seminal vesicles homogenates of gonadectomized male hamsters. Compounds 18 and 19 showed a much higher antiandrogenic effect than finasteride. This enhancement of the biological activity could probably be attributed to the coplanarity of the steroidal skeleton as previously observed by our group. The high antiandrogenic activity of the epoxy compound 16 is probably the result of the ring opening of the oxiran ring with the nucleophilic part of the enzyme 5alpha-reductase thus leading to a stable adduct with concomitant deactivation of this enzyme.     

Addition‐Fragmentation Chain Transfer to Polymer in the Free Radical Ring‐Opening Polymerization of an Eight‐membered Cyclic Allylic Sulfide Monomer

Summary: A detailed investigation of chain transfer to polymer during free radical ring‐opening polymerization of the eight‐membered disulfide monomer 2‐methyl‐7‐methylene‐1,5‐dithiacyclooctane (MDTO) is presented. It has been shown that extensive chain transfer to polymer occurs involving both poly(MDTO) radicals and cyanoisopropyl radicals. Significant decreases in molecular weight were observed when cyanoisopropyl radicals were generated in the presence of poly(MDTO) in the absence of monomer. The molecular weight distribution (MWD) obtained from polymerization of MDTO in the presence of pre‐added poly(MDTO) was markedly different from that obtained without pre‐added polymer. A kinetic model was constructed in an attempt to quantitatively describe the chain transfer to polymer process based on the addition fragmentation chain transfer mechanism. It was found however that the simulated MWDs were considerably broader than the experimental MWDs, which were similar to the Schulz‐Flory distribution.

Mechanism for chain transfer to polymer.     

X-ray diffraction and solid-state NMR studies of a germanium binuclear complex

A compound formulated as (C4H12N2)[Ge2(pmida)2(OH)2] x 4 H2O (where pmida(4-) = N-(phosphonomethyl)iminodiacetate and C4H12N2(2+) = piperazinedium cation), containing the anionic [Ge2(pmida)2(OH)2]2- complex, has been synthesised by the hydrothermal approach and its structure determined by single-crystal X-ray diffraction analysis. Several high-resolution solid-state magic-angle spinning (MAS) NMR techniques, in particular two-dimensional 1H-X(13C,31P) heteronuclear correlation (HETCOR) and 1H-1H homonuclear correlation (HOMCOR) experiments incorporating a frequency-switched Lee-Goldburg (FS-LG) decoupling scheme, have been employed for the first time in such a material. Using these tools in tandem affords an excellent general approach to study the structure of other inorganic-organic hybrids. We assigned the NMR resonances with the help of C...H and P...H internuclear distances obtained through systematic statistical analyses of the crystallographic data. The compound was further characterised by powder X-ray diffraction techniques, IR and Raman spectroscopy, and by elemental and thermal analyses (thermogravimetric analysis and differential scanning calorimetry).     

Determination of ammonia based on the electro-oxidation of hydroquinone in dimethylformamide or in the room temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide

The results detail a novel methodology for the electrochemical determination of ammonia based on its interaction with hydroquinone in DMF. It has been shown that ammonia reversibly removes protons from the hydroquinone molecules, thus facilitating the oxidative process with the emergence of a new wave at less positive potentials. The analytical utility of the proposed methodology has been examined with a linear range from 10 to 95 ppm and corresponding limit-of-detection of 4.2 ppm achievable. Finally, the response of hydroquinone in the presence of ammonia has been examined in the room temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluormethylsulfonyl)imide, [EMIM][N(Tf)₂]. Analogous voltammetric waveshapes to that observed in DMF were obtained, thereby confirming the viability of the method in either DMF or [EMIM][N(Tf)₂] as solvent.     

Is the A-ring of sparteine essential for high enantioselectivity in the asymmetric lithiation-substitution of N-Boc-pyrrolidine?

The simplest chiral portion of sparteine, N,N'-dimethyl-2-endo-methylbispidine, was prepared and evaluated in the asymmetric lithiation-substitution of N-Boc-pyrrolidine. The results indicate that the complete A-ring of sparteine is essential for high levels of asymmetric induction. DFT-QSSR analyses of the diamine/Li(+) complexes and DFT calculations of the pertinent i-PrLi/diamine/N-Boc-pyrrolidine complexes are predictive and provide complementary pictures of the stereochemical features critical to this transformation.     

Synthesis and photophysical evaluations of β-fused uracil-porphyrin derivatives

New β-fused uracil-porphyrin conjugates were synthesized by the tetramerization of uracil-pyrroles under acidic conditions. Two different synthetic approaches were systematically studied in order to evaluate their efficiency, as well as the possibility to obtain a single regioisomer. Metallation effects were studied for aggregation in solution, and preliminary photophysical experiments were also performed in order to evaluate the potential of these new compounds.