Detection of peginesatide in equine serum using liquid chromatography-tandem mass spectrometry for doping control purposes

Erythropoietin (EPO) and its recombinant analogues are suspected to be illicitly administered to horses for performance enhancing purposes and, consequently, prohibited in equine sports. Recently, a new erythropoiesis-stimulating agent, peginesatide (Omontys, formerly referred to as Hematide), belonging to the upcoming class of EPO-mimetic peptides, received approval for the treatment of anaemia in humans with chronic kidney disease on dialysis. As the pegylated dimeric peptide of approximately 45 kDa without sequence homology to EPO is not detectable by conventional EPO detection assays, specific methods are bound to be established for horse sports drug testing. Thus, by fortifying equine serum with peginesatide, an approach consisting of a proteolytic digestion with subtilisin after protein precipitation was developed, eventually targeting a proteotypic and xenobiotic pentapeptide which is easily accessible to liquid chromatography- tandem mass spectrometry analysis. The method was validated for qualitative purposes and demonstrated to be specific, precise (relative standard deviations below 14%), sensitive (limit of detection 10 ng mL(-1)) and linear. Being simple, cost-effective and readily transferable to other doping control laboratories, a mass spectrometric assay for the detection of therapeutic concentrations of peginesatide in equine serum is, in terms of preventive doping research, applicable to routine analysis shortly after approval of the drug.     

Enzymatically synthesized polyaniline film deposition studied by simultaneous open circuit potential and electrochemical quartz crystal microbalance measurements

The chemical and enzymatic deposition of polyaniline (PANI) films by in situ polymerization was studied and the resulting films were characterized. The film formation and polymerization processes were simultaneously monitored by the evolution of the open circuit potential and quartz-crystal microbalance measurements. Different substrates, such as Indium-Tin oxide electrodes and gold-coated quartz-crystal electrodes were used as substrates for PANI deposition. Electroactive PANI films were successfully deposited by in situ enzymatic polymerization at low oxidation potential. The electrogravimetric response of the enzymatically deposited PANI film was studied by cyclic voltammetry in monomer-free acidic medium. The morphology of the films was observed by scanning electron microscopy, revealing a granular structure in enzymatically deposited PANI. The PANI films were also characterized by thermogravimetric analysis, electrochemical impedance spectroscopy, and X-ray photoelectron and Fourier-transformed infrared spectroscopy. The simultaneous use of quartz crystal microbalance and open circuit potential is presented as a very useful technique to monitor enzymatic reactions involving oxidoreductases.     

The effect of hydrogen bonding on the excited-state proton transfer in 2-(2'-hydroxyphenyl)benzothiazole: a TDDFT molecular dynamics study

The dynamics of the excited-state proton transfer (ESPT) in a cluster of 2-(2'-hydroxyphenyl)benzothiazole (HBT) and hydrogen-bonded water molecules was investigated by means of quantum chemical simulations. Two different enol ground-state structures of HBT interacting with the water cluster were chosen as initial structures for the excited-state dynamics: (i) an intramolecular hydrogen-bonded structure of HBT and (ii) a cluster where the intramolecular hydrogen bond in HBT is broken by intermolecular interactions with water molecules. On-the-fly dynamics simulations using time-dependent density functional theory show that after photoexcitation to the S(1) state the ESPT pathway leading to the keto form strongly depends on the initial ground state structure of the HBT-water cluster. In the intramolecular hydrogen-bonded structures direct excited-state proton transfer is observed within 18 fs, which is a factor two faster than proton transfer in HBT computed for the gas phase. Intermolecular bonded HBT complexes show a complex pattern of excited-state proton transfer involving several distinct mechanisms. In the main process the tautomerization proceeds via a triple proton transfer through the water network with an average proton transfer time of approximately 120 fs. Due to the lack of the stabilizing hydrogen bond, intermolecular hydrogen-bonded structures have a significant degree of interring twisting already in the ground state. During the excited state dynamics, the twist tends to quickly increase indicating that internal conversion to the electronic ground state should take place at the sub-picosecond scale.     

Valence‐to‐Core X‐Ray Emission Spectroscopy of Iron–Carbonyl Complexes: Implications for the Examination of Catalytic Intermediates

Valence‐to‐core X‐ray emission spectroscopy (V2C XES) has been applied to a series of compounds relevant to both homogeneous catalysts and intermediates in heterogeneous reactions, namely [Fe(CO)₅], [Fe₂(CO)₉], [Fe₃(CO)₁₂], [Fe(CO)₃(cod)] (cod=cyclo‐octadienyl), [Fe₂Cp₂(CO)₄] (Cp=cyclo‐pentadienyl), [Fe₂Cp*₂(CO)₄] (Cp*=tetramethylcyclopentadienyl), and [FeCp(CO)₂(thf)][B(ArF)₄] (ArF=pentafluorophenyl). DFT calculations of the V2C XES spectra show very good agreement with experiment, which allows for an in depth analysis of the origins of the observed spectral signatures. It is demonstrated that the observed spectral features can be broken down into specific ligand and metal fragment contributions. The relative intensities of the observed features are further explained through a quantitative investigation of the metal 3p and 4p contributions to the spectra. The ability to use V2C XES to separate carbonyl, hydrocarbon, and solvent contributions is highlighted.     

Nickel-Ruthenium Mixed-Metal Carbonyl Clusters Syntheses and Solid State Structures of the Two Tetrahedral Clusters [PPh4][NiRu3(μ3 H)(CO)9(μ-CO)3] and [NEt4]2[NiRu3(CO)8(μ-CO)4]

Redox condensation of [Ru₃H(CO)₁₁]- with Ni(CO)₄, in tetrahydrofuran solution, under a nitrogen atmosphere, yields the tetranuclear anion [NiRu_H(CO)₁₁)-. Subsequent deprotonation with Bu'OK in acetonitrile solution leads to the formation of the related dianion. Both anions have been characterized by spectroscopic techniques, elemental analysis and single crystal X-ray diffraction. [PPh₄][NiRu₃H(CO)₁₂] crystallizes in the triclinic space group PI with unit cell dimensionsof a = 11.842(2) Å,b = 12.335(3) Å, c = 13.3080) Å,a = 91.89(2)°, = 93.35(1)°,y = 96.41(2)°, Z = 2, V= 1926.9(7) Å'. The NiRu₃, metal core of the molecule defines a distorted tetrahedron with nine terminal and three edge bridging carbonyl groups. The hydrido ligand was located by difference Fourier techniques and was found to bridge the NiRu₂ basal triangle at a distance of 0.88(6) A from this plane. Selected average distances and angles are: Ru-Ru = 2.839 Å, Ru-Ni = 2.640 Å, Ru-C, = 1.910 A,Ru-C _b = 2.084 Å, Ni-C _b = 2.022 Å, Ru-H = 1.77 Å, C-0, = 1.135 Å, C-O _b = 1.159 Å, M-C-O, = 176.3°,M-C--O _b = 139.3°;other distances are: Ni-C₁ = l.758(7) Å, Ni-H= 1.85(7) Å. [NEt₄]₂[NiRu₃(CO)₁₂] crystallizes in the orthorhombic space group Pnma (no. 62) with unit cell dimensions ofa=20.247(5) Å,b = 15.038(4)Å,c = 12.079(3) Å, Z=4, V=3678(2) A'. The molecule contains a tetrahedral NiRu₃ core with eight terminal and four edge bridging carbon monoxide groups which bridge the three Ni-Ru and one Ru-Ru bond. Average distances and angles are: Ru -Ru =2.3050A Ru-Ni 2.648 Å, Ru-C _t = 1.878 Å, Ru-C _b 2.045 Å, Ni-C _b = 2.055 Å, C-O _t = 1.145 Å, C-01,=1.157 Å, M-C-O,= 176.9°, M-C-O _b = 138.6°; other distance is: Ni-C _t = 1.754(10) Å,t = terminal,b = bridging.     

Preparation and spectroscopic studies of some cyclic urea adducts of triphenyl-tin and -lead halides

1,3-Dimethyl-2-imidazolidinone (dimethylethylene urea, DMEU) and 1,3-di- methyl-3,4,5,6-tetrahydro-2(IH)-pyrimidinone (dimethylpropylene urea, DMPU) adducts of the type Ph₃SnX·L (X = Cl, Br and I), Ph₃PbX·L (X = Br, I), 3Ph₃PbCl·2DMEU and 2Ph₃PbCl · DMPU have been prepared and characterized. Assignments are made for ν(CO) and ν(CN) frequencies in the IR, and for skeletal frequencies observed in both the IR and Raman spectra in the range 400 to 100 cm^?1 Infrared measurements show that the adducts are bound through the carbonyl oxygen, and are highly dissociated in dichloromethane solution. ¹H and ¹¹⁹Sn or ²⁰⁷Pb NMR measurements reveal that ligand exchange, fast on the NMR time scale, occurs in solution. Coordination of the ligand causes a large upfield shift in the ¹¹⁹Sn or ²⁰⁷Pb resonances, but Ph₃MI · L have shifts similar to those for the parent iodides, indicating almost complete dissociation. Thermodynamic parameters are reported for the dissociation of Ph₃SnX · DMPU (X = Cl, Br) in CH₂Cl₂ solution.     

Elucidating the nature and reactivity of Ti ions incorporated in the framework of AlPO-5 molecular sieves. New evidence from 31P HYSCORE spectroscopy

The incorporation of Ti ions within the framework of aluminophosphate zeotype AlPO-5 and their chemical reactivity is studied by means of CW-EPR, HYSCORE, and UV-vis spectroscopies. Upon reduction, Ti(3+) ions are formed, which exhibit large (31)P hyperfine couplings, providing direct evidence for framework substitution of reducible Ti ions at Al sites.     

Poly(ester urethane) guides for peripheral nerve regeneration

A biocompatible and elastomeric PU was synthesized from low-molecular-weight PCL as macrodiol, CMD as chain extender and HDI as chain linker for applications in the field of peripheral nerve repair. PU cast films supported in vitro attachment and proliferation of NOBEC. The in vitro adhesion and proliferation of S5Y5 neuroblastoma cells on the inner surface of uncoated, gelatin- and PL-coated PU guides were compared. Due to their superior in vitro performance, PL-coated PU guides were tested in vivo for the repair of 1.8 cm-long defects in rat sciatic nerves. The progressive regeneration was confirmed by EMG and histological analysis showing the presence of regenerating fibers in the distal stumps.     

The Antiepileptic Lamotrigine and Its Analogues: Comparative Theoretical Electronic Properties

Electronic properties of lamotrigine (LTG) and two analogues (A1 and A2) are compared through MOPAC-AM1 calculations. Two stable conformers of LTG are calculated to exist in agreement with X-ray crystallography. In the three compounds and the two conformers for each of them, the more favorable protonation sites are N₂ and N₄; these should then be the sites appropriate for interaction with a receptor, and group valence reinforces the supposition. The molecular electrostatic potentials show that a region between the two chlorine atoms in LTG could be the site for an electrostatic interaction with a corresponding site in the receptor. The fluorine atom in A1 would play an equivalent role. A simple model for LTG-receptor interaction is proposed.