A novel LIF-CE method for the separation of hyaluronan- and chondroitin sulfate-derived disaccharides: Application to structural and quantitative analyses of human plasma low- and high-charged chondroitin sulfate isomers

The report describes a rapid and simple CE method using LIF detection for the analysis of unsaturated disaccharides obtained from enzymatic depolymerization of plasma chondroitin sulfate (CS) isomers. The disaccharide reducing groups were labeled with 2-aminoacridone (AMAC). The fluorotagged products can be separated by reversed-polarity CE using a sodium acetate buffer, pH 3.8, in the presence of 0.05% methylcellulose. The choice of the appropriate electrophoretic conditions was performed after a deep analysis of the most important parameters affecting analyte separation. In particular, the effect of both run buffer concentration and pH on resolution, efficiency, migration times, and peak area was evaluated. The selected electrophoretic conditions allowed us to separate the CS isomers-derived Delta-disaccharides in less than 12 min, also resolving the nonsulfated disaccharides released from CS isomers from those released from hyaluronan (HA). Moreover, these conditions gave a good reproducibility of both the migration times (CV%, 0.25) and the peak areas (CV%, 1.4). Intra- and interassay CV were 5.37 and 7.23%, respectively, and analytical recovery was about 86%. The applicability of the above method to the quantitative and structural disaccharide analyses of plasma CS isomers was investigated. Data obtained from 44 healthy human subjects were compared with those obtained by a fluorophore-assisted carbohydrate electrophoresis (FACE) reference assay, by using the Passing and Bablok regression and Bland-Altman tests. The developed method could represent a good tool for an ultrasensitive analysis of CS isomers in biological samples from different sources, particularly when samples are available in very low amounts.     

Rapid genotyping of CYP2D6, CYP2C19 and TPMT polymorphisms by primer extension reaction in a dipstick format

In recent years an increasing amount of interest has been directed at the study and routine testing of polymorphisms responsible for variations in drug metabolism. Most of the current methods involve either time-consuming electrophoresis steps or specialized and expensive equipment. In this context, we have developed a rapid, simple and robust method for genotyping of CYP2D6*3, CYP2D6*4, CYP2C19*2, CYP2C19*3 and TPMT*2 single nucleotide polymorphisms (SNP). Genomic DNA is isolated from whole blood and the segments that span the SNP of interest are amplified by PCR. The products are subjected directly (without purification) to two primer extension (PEXT) reactions (three cycles each) using normal and mutant primers in the presence of biotin-dUTP. The PEXT primers contain a (dA)₃₀ segment at the 5′ end. The PEXT products are detected visually by a dry-reagent dipstick-type assay in which the biotinylated extension products are captured from immobilized streptavidin on the test zone of the strip and detected by hybridization with oligo(dT)-functionalized gold nanoparticles. Patient samples (76 variants in total) were genotyped and the results were fully concordant with those obtained by direct DNA sequencing.     

Multivariate calibration on NIR data: development of a model for the rapid evaluation of ethanol content in bakery products

A new NIR method based on multivariate calibration for determination of ethanol in industrially packed wholemeal bread was developed and validated. GC-FID was used as reference method for the determination of actual ethanol concentration of different samples of wholemeal bread with proper content of added ethanol, ranging from 0 to 3.5% (w/w). Stepwise discriminant analysis was carried out on the NIR dataset, in order to reduce the number of original variables by selecting those that were able to discriminate between the samples of different ethanol concentrations. With the so selected variables a multivariate calibration model was then obtained by multiple linear regression. The prediction power of the linear model was optimized by a new “leave one out” method, so that the number of original variables resulted further reduced.     

Synthesis of beta‐proline like derivatives and their evaluation as sodium channel blockers

A simple and convenient procedure for the preparation of beta‐proline like derivatives in their racemic and optically active forms has been reported. The compounds have been screened for their potential activity as sodium channel blockers.     

4,2-Ribbon like ferromagnetic cyano-bridged Fe(III)2Ni(II) chains: a magneto-structural study

The low-spin iron(III) complex AsPh(4)[Fe(III)(bpy)(CN)(4)].CH(3)CN (1) [AsPh(4) = tetraphenylarsonium cation] and the heterobimetallic chains [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)].4H(2)O with L = bpy (2) and phen (3) [bpy = 2,2'-bipyridine and phen = 1,10-phenanthroline] have been prepared and their structures determined by X-ray diffraction methods. The structure of 1 consists of mononuclear [Fe(bpy)(CN)(4)](-) anions, tetraphenylarsonium cations and acetonitrile molecules of crystallization. The iron(III) is hexacoordinated with two nitrogen atoms of the bidentate bpy and four carbon atoms of four terminal cyanide groups building a distorted octahedral surrounding around the metal atom. 2 and 3 are isomorphous compounds whose structure is made up of neutral 4,2-ribbon like bimetallic chains of formula [{Fe(III)(L)(CN)(4)}(2)Ni(II)(H(2)O)(2)] where the [Fe(III)(L)(CN)(4)](-) unit acts as a bis-monodentate bridging ligand toward the trans-diaquanickel(II) units through two of its four cyanide groups in cis positions. The chains exhibit two orientations in the unit cell and they interact with each other through hydrogen bonds involving the coordination and crystallization water molecules together with the uncoordinated cyanide nitrogen atoms of the [Fe(L)(CN)(4)](-) units. Compounds 2 and 3 behave as ferromagnetic Fe(III)(2)Ni(II) chains which interact ferromagnetically at very low temperatures in the case of 2, whereas metamagnetic-like behaviour is observed for with a critical field (H(c)) around 200 G. For H > H(c) the ferromagnetic Fe(III)(2)Ni(II) chains of 3 exhibit a frequency dependence of the out-of-phase ac susceptibility signal at T < 3.5 K.     

Development of Analytical Strategies for the Determination of Olive Fruit Bioactive Compounds Using UPLC-HRMS and HPLC-DAD. Chemical Characterization of Kolovi Lesvos Variety as a Case Study

In this study, an overall survey regarding the determination of several bioactive compounds in olive fruit is presented. Two methodologies were developed, one UPLC-Q-TOF-MS method for the determination of olive fruit phenolic compounds and one HPLC-DAD methodology targeting the determination of pigments (chlorophylls and carotenoids), tocopherols (α-, β, -γ, δ-) and squalene. Target and suspect screening workflows were developed for the thorough fingerprinting of the phenolic fraction of olives. Both methods were validated, presenting excellent performance characteristics, and can be used as reliable tools for the monitoring of bioactive compounds in olive fruit samples. The developed methodologies were utilized to chemical characterize the fruits of the Kolovi olive variety, originating from the island of Lesvos, North Aegean Region, Greece. Twenty-five phenolic compounds were identified and quantified in Kolovi olives with verbascoside, hydroxytyrosol, oleacein and oleomissional found in significantly high concentrations. Moreover, 12 new bioactive compounds were identified in the samples using an in-house suspect database. The results of pigments analysis suggested that Kolovi variety should be characterized as low pigmentation, while the tocopherol and squalene content was relatively high compared to other olive varieties. The characterization of Kolovi olive bioactive content highlighted the high nutritional and possible economic value of the Kolovi olive fruit.     

Spectrophotometric Characteristics of New Pyridylindolizine Derivatives Solutions

Three new pyridylindolizine derivatives, 1, 2, 3-tricarbometoxi-7-(4-pyridyl)-pyrrolo[1, 2-a]pyridine (I), 1,2-dicarboethoxy-3-(4-bromobenzoyl)-7-(4-pyridyl)-pyrrolo[1,2-a]pyridine (II) and its isomer 1,2-dicarboethoxy-3- (4-bromobenzoyl) -5- (2-pyridyl) -pyrrolo[1, 2-a]pyridine (III) have been investigated in different solutions by UV-VIS absorption, steady-state, and time-resolved fluorescence methods. The effects of the substituent and solvent on the spectroscopic properties have been demonstrated. The fluorescence decay data could be fitted to a single-exponential function. The lifetime values are higher in protic polar than in aprotic apolar solvents for compound I. In the case of compounds II and III the fluorescence intensities and lifetimes are very low, with the exception of III in aprotic solvents. The absorption and fluorescence properties of the compounds showed a solvent dependence.     

Prediction of properties of biodiesel-diesel blends using spectrofluorimetry and multivariate calibration

Regressions based on fluorescence spectroscopy were developed to provide relatively inexpensive and rapid measurements of the concentration, viscosity, and specific gravity of biodiesel-diesel blends. The methods involved obtaining a mathematical model from spectrofluorimetric data and data from a given property (concentration, dynamic viscosity, or specific gravity) using partial least squares (PLS) regression, which was then applied as a model for predicting properties of interest. The predicted concentrations, dynamic viscosities, and specific gravities of the biodiesel-diesel blends were compared with actual values and agreed reasonably well with the obtained results. The models showed high correlation between real and predicted values. The R-square values near 1 indicated excellent model accuracy for predicting concentrations, specific gravities, and dynamic viscosities of biodiesel-diesel blends. The residual distribution did not follow a trend with respect to the predicted variables, indicating an excellent fit to the data.      

Charge transfer in model bioinspired carotene-porphyrin dyads

We present a computational study based on accurate DFT and TD-DFT methods on model bioinspired donor-acceptor dyads, formed by a carotenoid covalently linked to a tetraphenylporphyrin (TPP) at the ortho position of one of the TPP phenyl rings. Dyadic systems can be used in the construction of organic solar cells and development of efficient photocatalytic systems for the solar energy conversion, due to the unique advantages they offer in terms of synthetic feasibility. This study aims to describe the influence of chemical modifications on the absorption spectra, in particular on the lowest energy charge transfer bands. Effects of different metals of biological interest, i.e., Mg, Fe, Ni, and Zn, and of H(2)O and histidine molecules coordinated to the metals in different axial positions are rationalized.     

Entropy and Enthalpy Effects on Metal Complex Formation in Non-Aqueous Solvents: The Case of Silver(I) and Monoamines

Access to the enthalpy and entropy of the formation of metal complexes in solution is essential for understanding the factors determining their thermodynamic stability and speciation. As a case study, in this report we systematically examine the complexation of silver(I) in acetonitrile (AN) with the following monoamines: n-propylamine (n-pr), n-butylamine (n-but), hexylamine (hexyl), diethylamine (di-et), dipropylamine (di-pr), dibutylamine (di-but), triethylamine (tri-et) and tripropylamine (tri-pr). The study shows that the complex stabilities are quite independent of the length of the substitution chain on the N atom and demonstrates that, in general, the overall enthalpy terms associated with the complex formation are strongly exothermic, whereas the entropy values oppose the complex formations. In addition, we examined the similarity of the formation constants of AgL complexes of the primary monoamines in AN, dimethylsulfoxide (DMSO) and water, which were unexpected on the basis of the difference between the donor properties of solvents.