Methods and options for the heterologous production of complex natural products

This review will detail the motivations, experimental approaches, and growing list of successful cases associated with the heterologous production of complex natural products.     

Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanosphere. Part 2: Simultaneous release of a drug and a prodrug (clindamycin and clindamycin phosphate)

The novel concept of a simultaneous, controlled release of a drug and a prodrug with different physico-chemical properties was applied in order to prolong the release period of antibiotics and estimate their high local concentrations, which are the necessary preconditions for the treatment of some chronic infection diseases. For this purpose poly(D,L-lactide-co-glycolide)/hydroxyapatite (PLGA/HAp) core-shell nanostructures were used as the carrier of clindamycin-base, as a drug, and clindamycin-2-phosphate, as a prodrug model. As a result, a two-step release was observed: the controlled release of the more soluble phosphate form and the sustained release of the less-soluble base form of clindamycin, resulting in a high overall concentration of the released drug during the period of 30 days in vitro. The HAp phase within the PLGA core-shells, applied as a drug carrier, delayed the process of the degradation of the polymer; however, the presence of the drug affected the process of degradation and this influence was the dominant factor in the control over the degradation of the polymer phase of PLGA/HAp and the consequent kinetics of the drug release.     

Poly(D,L-lactide-co-glycolide)/hydroxyapatite core-shell nanospheres. Part 3: properties of hydroxyapatite nano-rods and investigation of a distribution of the drug within the composite

A step-by-step analysis of the formation and the drug loading of the poly(D,L-lactide-co-glycolide)/hydroxyapatite (PLGA/HAp) composite was carried out in a perspective of the following parameters: the structure, the morphology and the adsorption/desorption properties of the composite's bioceramic part. The authors demonstrated the importance of the material's capacity to form a fine dispersion of solid HAp particles, as an initial step, for the further loading of the drug and for the formation of the core-shell structures. The nanometer-sized rods of HAp have the capacity of ensuring a rapid adsorption and a controlled desorption of the drug from their surface, and they can act as a nucleating site for the formation of polymeric cores. Each component of this material was labeled with fluorescence dye, which enabled an insight into the distribution of the components in the core-shells that were obtained as the final outcome. Such an analysis showed a high level of uniformity among the cores enclosed within polymeric shells. From a practical perspective, the labeling of each component of the composite can be regarded as an additional functionality of the material: labeling can enable us to monitor its action during the healing process. This ability to be easily detected is expected to enhance the procedure for the controlled delivery of antibiotics after their local implantation of carriers loaded with the antibiotic and to provide more careful control over this process.     

Desirability-based optimization and its sensitivity analysis for the perindopril and its impurities analysis in a microemulsion LC system

In the current paper the application of multiobjective optimization (MOOP) technique, via Derringer's desirability function, to a microemulsion liquid chromatographic (MELC) method is described. Chromatographic separation of perindopril tert-butylamine and its four impurities was selected as the case study. Central composite design (CCD) with fractional factorial design, ± 0.5 α star design and four replications in central point was applied for a response surface study, in order to examine in depth the effects of the most important factors. As factors that influence the system mostly (i) content of ethyl acetate and (ii) butyl acetate in composite internal phase, (iii) content of sodium dodecyl sulfate (surfactant) and (iv) n-butanol (co-surfactant), as well as (v) pH of the mobile phase were selected. Retention factor of (a) perindoprilat and (b) impurity Y 31 and (c) resolution factor for impurities Y 32 and 33 were chosen for simultaneous optimization. By adjustment of the importance coefficients and weights, according to defined objectives, the optimal mobile phase composition was predicted to be: 0.24% w/v butyl acetate, 0.3% w/v ethyl acetate, 2% w/v SDS, 7.75% w/v n-butanol and pH of the mobile phase 3.7. The sensitivity analysis of desirability function for these optimal conditions was conducted for the first time in LC separations, by applying a sensitivity procedure. The performed sensitivity analysis confirmed that the higher overall desirability does not necessarily mean a better solution. The accuracy of prediction might be affected if the optimal levels of input variables, achieved from several design points, end up with equal settings and different corresponding overall desirability. In our study this was not the issue, which confirmed the adequacy of predicted optimum.     

Hydrolysis of the amide bond in N-acetylated l-methionylglycine catalyzed by various platinum(II) complexes under physiologically relevant conditions

The hydrolytic reactions between various Pt(II) complexes of the type [Pt(L)Cl₂] and [Pt(L)(CBDCA-O,O′] (L is ethylenediamine, en; (±)-trans-1,2-diaminocyclohexane, dach; (±)-1,2-propylenediamine, 1,2-pn and CBDCA is the 1,1-cyclobutanedicarboxylic anion) and the N-acetylated l-methionylglycine dipeptide (MeCOMet-Gly) were studied by ¹H NMR spectroscopy. All reactions were realized at 37 °C with equimolar amounts of the Pt(II) complex and the dipeptide at pH 7.40 in 50 mM phosphate buffer in D₂O. Under these experimental conditions, a very slow cleavage of the Met-Gly amide bond was observed and this hydrolytic reaction proceeds through the intermediate [Pt(L)(H₂O)(MeCOMet-Gly-S)]⁺ complex. In general, it can be concluded that faster hydrolytic cleavage of the MeCOMet-Gly dipeptide was observed in the reaction with the chloride complex than with corresponding CBDCA Pt(II) complexes. The steric effects of the Pt(II) complex on the hydrolytic cleavage of the amide bond in the MeCOMet-Gly dipeptide were also investigated by ¹H NMR spectroscopy. It was found that the rate of hydrolysis decreases as the steric bulk of the CBDCA and chlorido Pt(II) complexes increase (en > 1,2-pn > dach). These results contribute to a better understanding of the toxic side effects of Pt(II) antitumor drugs and should be taken into consideration when designing new potential Pt(II) antitumor drugs with preferably low toxic side effects.     

Thermodynamic and NMR study of aggregation of dodecyltrimethylammonium chloride in aqueous sodium salicylate solution

The complex aggregation processes of dodecyltrimethylammonium chloride (DTAC) have been studied in dilute solutions of sodium salicylate (NaSal) by isothermal titration calorimetry and electrical conductivity at temperatures between 278.15 K and 318.15 K. A structural transformation that was dependent on the concentrations of DTAC and NaSal was observed. The micellization process in dilute solutions of DTAC has been subjected to a detailed thermodynamic analysis and shown to occur at considerably lower critical micelle concentrations than reported for DTAC in water and NaCl solutions. Gibbs free energy, Δ _mic G ^o, and entropy, Δ _mic S ^o, were deduced by taking into account the degree of micelle ionization, β, estimated from conductivity measurements. From the temperature dependence of the enthalpy of micellization, Δ _mic H ^o, the heat capacities of micellization, D_mic c_p^o {\Delta_{{{\rm mic} }}}c_p^o were determined and discussed in terms of the removal of large areas of non-polar surface from contact with water upon micellization. The process is exothermic at all temperatures, indicating, in addition to the hydrophobic effect, the presence of strong interactions between surfactant and salicylate ions. These were confirmed by ¹H NMR spectroscopy and diffusion NMR experiments. Salicylate ions not only interact with the headgroups but also insert further into the micelle core. At c _NaSal/c _DTAC > 2.5, the structural rearrangements occur even at relatively low concentrations of NaSal.     

Synthesis and characterization of novel amino cellulose esters

The homogeneous conversion of cellulose dissolved in N-methyl-2-pyrrolidone/LiCl and 1-N-butyl-3-methylimidazolium chloride with N-methyl-2-pyrrolidone, ε-caprolactam, N-methyl-ε-caprolactam, and N-methyl-2-piperidone in the presence of p-toluenesulphonic acid chloride was studied. Depending on the reaction conditions, novel cellulose esters with degree of substitution (DS) values ranging from 0.12 to 1.17 could be prepared. The structure of the amino group containing cellulose esters was elucidated by elemental analysis, FTIR- and NMR spectroscopy. NMR spectroscopy revealed an almost complete esterification of position 6 of the anhydroglucose unit at DS of 1. The conversion can be conducted between room temperature and 40 °C, while side-reactions became predominant at 60 °C. Starting with DS of 0.24, the samples were soluble both in water and dimethyl sulphoxide. The derivatives described are capable of forming polyelectrolyte complexes. The samples were stable at room temperature in aqueous solution at pH 2 and 7. Lower viscosities were found for samples with higher DS in aqueous solution at comparable molar mass.     

Validation of an oil-in-water microemulsion liquid chromatography method for analysis of perindopril tert-butylamine and its impurities

This paper describes the development and validation of a microemulsion liquid chromatography (MELC) method for simultaneous determination of perindopril tert-butylamine and its impurities in bulk active substances and the pharmaceutical dosage form of tablets. An appropriate resolution with reasonable retention times was obtained for a microemulsion containing 0.24% (w/v) butyl acetate, 0.30% (w/v) ethyl acetate, 2% (w/v) sodium dodecyl sulfate, 7.75% (w/v) n-butanol, and 20.0 mM potassium dihydrogen phosphate, the pH of which was adjusted to 3.70 with 85% orthophosphoric acid. Separations were performed on a Nucleosil 120-5 butyl modified (C4), 250 x 4 mm, 5 microm particle size silica column at 40 degrees C, with a mobile phase flow rate of 1.25 mL/min. UV detection was performed at 254 nm. The established method was subjected to method validation, and required validation parameters were defined. Robustness testing, an important part of method validation, was performed as well. Since robustness validation can be conducted using different experimental designs, the Plackett-Burman design was applied due to its possibility of testing many factors at the same time. The validated MELC method was found to be suitable for the simultaneous determination of perindopril tert-butylamine and its impurities in pharmaceuticals.     

Histone deacetylase inhibitors as a tool to up-regulate new fungal biosynthetic products: isolation of EGM-556, a cyclodepsipeptide, from Microascus sp

The histone deacetylase (HDAC) inhibitor suberoylanilide hydroxamic acid (SAHA) was used to turn on the biosynthesis of EGM-556, a new cyclodepsipeptide of hybrid biosynthetic origin, isolated from the Floridian marine sediment-derived fungus Microascus sp. The absolute configurations of three chiral centers were determined by Marfey's derivatization. EGM-556 represents one of the few examples in which silent biosynthetic genes, encoding a new secondary metabolite, were activated by means of epigenetic manipulation of the fungal metabolome.