Individual and simultaneous enzymatic determination of ethanol and acetaldehyde in wines by flow injection analysis

The individual and simultaneous enzymatic determination of ethanol and acetaldehyde in wine by flow injection analysis is described. Individual determinations of 0.002–0.016% (v/v) ethanol or 1.0–8.0 μg ml^?1 acetaldehyde with r.s.d. 0.7% and 0.5%, respectively, are done with a single-beam spectrophotometer, based on the use of alcohol dehydrogenase and aldehyde dehydrogenase. A diode-array detector and dual reagent injections are used for the simultaneous determination of the two compounds. The errors are 〈 3.5% and 〈 2.0% for ethanol and acetaldehyde, respectively, when the method is applied to wine samples.     

Use of photochemical reactions in flow injection: determination of oxalate in urine

The use of photochemical reactions in flow injection (FI) is reported. The irradiation of an FI reactor with a suitable source facilitates the development of the iron(III)-oxalate reaction, allowing the amperometric determination of the anion in the range 1.0-13.0 micrograms ml-1, with a relative standard deviation of 1.1% and a sampling frequency of 40 h-1. The proposed method was applied successfully to the determination of oxalate in urine samples.     

A-posteriori KAM theory with optimal estimates for partially integrable systems

In this paper we present a-posteriori KAM results for existence of d-dimensional isotropic invariant tori for n-DOF Hamiltonian systems with additional $n?d$ independent first integrals in involution. We carry out a covariant formulation that does not require the use of action-angle variables nor symplectic reduction techniques. The main advantage is that we overcome the curse of dimensionality avoiding the practical shortcomings produced by the use of reduced coordinates, which may cause difficulties and underperformance when quantifying the hypotheses of the KAM theorem in such reduced coordinates. The results include ordinary and (generalized) iso-energetic KAM theorems. The approach is suitable to perform numerical computations and computer assisted proofs.     

Chlorine‐Enhanced Surface Mobility of Au(100)

Motivated by experimental studies of two‐dimensional Ostwald ripening on Au(100) electrodes in chlorine‐containing electrolytes, we have studied diffusion processes using density functional theory. We find that chlorine has a propensity to temporary form AuCl complexes, which diffuse significantly faster than gold adatoms. With and without chlorine, the lowest activation energy is found for the exchange mechanism. Chlorine furthermore reduces the activation energy for the detachment from kink sites. Kinetic Monte Carlo simulations were performed on the basis of extensive density functional theory calculations. The island‐decay rate obtained from these Monte Carlo simulations, as well as the decay rate obtained from the theoretical activation energies and frequency factors when inserted into analytical solutions for Ostwald ripening, are in agreement with experimental island‐decay rates in chlorine‐containing electrolytes.     

A Study of the Thorpe-Ziegler Reaction in Very Mild Conditions

The Thorpe-Ziegler reaction has been used in the preparation of enaminonitriles and cyclic ketones for many years. A wide variety of bases¹ have been employed to acomplish this reaction, the most effective being the alkali metal salts of aralkyl amines. The reaction conditions vary from room temperature to toluene reflux temperature for long periods of time¹.     

Synthesis in Water and Antimicrobial Activity of 5-Trichloromethyl-4,5-dihydroisoxazoles

Two series of 5-trichloromethylisoxazoles were synthesized from the cyclocondensation of 1,1,1-trichloro-4-methoxy-3-alken-2-ones [Cl₃CC(O)C(R²) = C(R¹)OMe, where R¹ = H, Me, Et, Pr, iso-Pr, cyclo-Pr, Bu, terc-Bu, CH₂Br, CHBr₂, CH(Me)SMe, (CH₂)₂Ph, and Ph, and R² = H; R¹ = H and R² = Me and Et; R¹ and R² = -(CH₂)₄- and -(CH₂)₅-; and R¹ = Et and Ph and R² = Me] with hydroxylamine hydrochloride through a rapid one-pot reaction in water. The 5-trichloromethyl-4,5-dihydroisoxazoles were aromatized by reaction with concentrated sulfuric acid to obtain the respective 5-trichloromethylisoxazoles. Their structures were confirmed by elemental analysis, ¹H/¹³C nuclear magnetic resonance, and electron impact mass spectroscopy. Crystal structure analysis for 5-triclhoromethyl-5-hydroxy-3-propyl-4,5-dihydroisoxazole (2d) and 5-trichloromethyl-5-hydroxy-3,4-hexamethylene-4,5-dihydroisoxazole (2o) is presented. The antimicrobial activities of the 5-trichloromethyl-4,5-dihydroisoxazole derivatives were examined using the standard twofold dilution method against Gram-positive bacteria (Staphylococcus aureus), Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa), and yeasts (Candida spp. and Cryptococcus neoformans). All of the tested 5-trichloromethyldihydroisoxazoles exhibited antibacterial and antifungal activities at the tested concentrations.

Supplemental materials are available for this article. Go to the publisher's online edition of Synthetic Communications® to view the free supplemental file.     

Implementation of the k 0-standardization method for analysis of geological samples at the Neutron Activation Analysis Laboratory, São Paulo, Brazil

The Neutron Activation Analysis Laboratory (LAN-IPEN) has been analysing geological samples for many years with the INAA comparative method, for geochemical and environmental research. This study presents the results obtained in the implementation of the k ₀-standardization method at LAN-IPEN, for geological samples analysis, by using the program k ₀-IAEA, provided by the International Atomic Energy Agency (IAEA). The thermal to epithermal flux ratio f and the shape factor α of the epithermal flux distribution of the IEA-R1 nuclear reactor of IPEN were determined for the pneumatic irradiation facility and one selected irradiation position, for short and long irradiations, respectively. To obtain these factors, the “bare triple-monitor” method with ¹⁹⁷Au–⁹⁶Zr–⁹⁴Zr was used. In order to validate the methodology, the geological reference materials basalts JB-1 (GSJ) and BE-N (IWG-GIT), andesite AGV-1 (USGS), granite GS-N (ANRT), SOIL-7 (IAEA) and sediment Buffalo River Sediment (NIST–BRS-8704), which represent different geological matrices, were analysed. The concentration results obtained agreed with assigned, with bias <10 % except for Zn in AGV-1. The U-score test showed that all results, except Mg in JB-1, are within 95 % confidence interval. These results indicate excellent possibilities of using this parametric method at the LAN-IPEN for geochemical and environmental studies.     

Ultrasound-assisted crystallization (sonocrystallization)

The positive influence of ultrasound (US) on crystallization processes is shown by the dramatic reduction of the induction period, supersaturation conditions and metastable zone width. Manipulation of this influence can be achieved by changing US-related variables such as frequency, intensity, power and even geometrical characteristics of the ultrasonic device (e.g. horn type size). The volume of the sonicated solution and irradiation time are also variables to be optimized in a case-by-case basis as the mechanisms of US action on crystallization remain to be established. Nevertheless, the results obtained so far make foreseeable that crystal size distribution, and even crystal shape, can be ‘tailored’ by appropriate selection of the sonication conditions.