Spatial and temporal resolution effects on dynamic contrast-enhanced magnetic resonance mammography

We tested the hypothesis that partial volume effects due to poor in-plane resolution and/or low temporal resolution used in clinical dynamic contrast-enhanced magnetic resonance imaging results in erroneous diagnostic information based on inaccurate estimates of tumor contrast agent extravasation and tested whether reduced encoding techniques can correct for dynamic data volume averaging. Image spatial resolution was reduced from 469 x 469 microm2 to those reported below by selecting a subset of k-space data. We then compared the top five K(trans)/V(T) "hot spots" obtained from the original data set, 469 x 469-microm in-plane spatial resolution and an 18-s temporal resolution processed by fast Fourier transform (FFT), with values obtained from data sets having in-plane spatial resolutions of 938 x 938, 1875 x 1875 and 2500 x 2500 microm2 and a temporal resolution of 18 s, or data sets with temporal resolutions of 36, 54 and 72 and a spatial resolution of 469 x 469 microm2, and found them to statistically differ from the parent data sets. We then tested four different post processing methods for improving the spatial resolution without sacrificing temporal resolution: zero-filled FFT, keyhole, reduced-encoding imaging by generalized-series reconstruction (RIGR) and two-reference RIGR (TRIGR). The top five values of K(trans)/V(T) obtained from data sets, the in-plane spatial resolutions of which were improved to 469 x 469 microm2 by zero-filling FFT, Keyhole and RIGR, statistically differed from those obtained from the original 469 x 469 microm2 FFT parent image data set. Only the 938 x 938 and 1875 x 1875 microm2 data sets reconstructed to 469 x 469 microm2 with TRIGR reconstruction method yielded values of the top five K(trans)/V(T) hot spots statistically the same as the original parent data set, 469 x 469 microm2 in-plane spatial and 18-s temporal-resolution FFT. That is, partial volume effects from data sets of different in-plane spatial resolution resulted in statistically different values of the top five K(trans)/V(T) hot spots relative to a high spatial and temporal resolution data set, and TRIGR reconstruction of these low resolution data sets to high resolution images provided statistically similar values with a savings in temporal resolution of 2 to 4 times.     

Drug-dendrimer supramolecular complexation studied from molecular dynamics simulations and NMR spectroscopy

Fully atomistic molecular dynamics (MD) simulations and NMR spectroscopy were employed to get insights about the molecular details of drug-dendrimer supramolecular association phenomena, using piroxicam (PRX) and the third generation poly(amido amine) (PAMAM-G3) dendrimer as model systems. Theoretical results concerning the complex stoichiometry suggest that PRX forms drug-dendrimer complexes of the type 24:1 at pH 7.0. This result was validated with the experimental quantities obtained from aqueous solubility profiles, which led to an empiric stoichiometry of 23:1 for the PRX:PAMAM-G3 system. The predicted binding mode between PRX and PAMAM-G3 accounts for the preferred encapsulation of the drug inside dendrimer cavities, which is mainly driven by van der Waals and hydrogen bonding interactions, and to a lesser extent, for the external association of the guest through electrostatic contacts with the positively charged amino groups of PAMAM periphery. The binding mode obtained from MD simulations was confirmed with 2D-NOESY experiments, which evidence the preferred internal complexation of PRX with PAMAM-G3. The predominance of internal encapsulation over external contacts in the PRX:PAMAM-G3 system differs from the general behaviour expected for acidic anionic guests, for which external electrostatic interactions with the positively charged PAMAM surface have been postulated as the most relevant factor for drug association.     

Characterization of a Robust CoII Fluorescent Complex Deposited Intact On HOPG

The new diimine fluorescent ligand ACRI‐1 based on a central acridine yellow core is reported along with its coordination complex [Co₂( ACRI‐1 )₂] ( 1 ), a fluorescent weak ferromagnet. Due to the strong fluorescence of the acridine yellow fluorophore, it is not completely quenched when the ligand is coordinated to Co^II. The magnetic properties of bulk complex 1 and its stability in solution have been studied. Complex 1 has been deposited on highly ordered pyrolitic graphite (HOGP) from solution. The thin films prepared have been characterized by AFM, time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS), grazing incidence X‐ray diffraction (GIXRD), X‐ray absorption spectroscopy (XAS), X‐ray magnetic circular dichroism (XMCD) and theoretical calculations. The data show that the complex is robust and remains intact on the surface of graphite.     

gem‐Difluorocarbadisaccharides: Restoring the exo‐Anomeric Effect

Molecular mimicry is an essential part of the development of drugs and molecular probes. In the chemical glycobiology field, although many glycomimetics have been developed in the past years, it has been considered that many failures in their use are related to the lack of the anomeric effects in these analogues. Additionally, the origin of the anomeric effects is still the subject of virulent scientific debates. Herein, by combining chemical synthesis, NMR methods, and theoretical calculations, we show that it is possible to restore the anomeric effect for an acetal when replacing one of the oxygen atoms by a CF₂ group. This result provides key findings in chemical sciences. On the one hand, it strongly suggests the key relevance of the stereoelectronic component of the anomeric effect. On the other hand, the CF₂ analogue adopts the natural glycoside conformation, which might provide new avenues for sugar‐based drug design.     

Organocatalytic Control over a Fuel-Driven Transient-Esterification Network**

Signal transduction in living systems is the conversion of information into a chemical change, and is the principal process by which cells communicate. In nature, these functions are encoded in non-equilibrium (bio)chemical reaction networks (CRNs) controlled by enzymes. However, man-made catalytically controlled networks are rare. We incorporated catalysis into an artificial fuel-driven out-of-equilibrium CRN, where the forward (ester formation) and backward (ester hydrolysis) reactions are controlled by varying the ratio of two organocatalysts: pyridine and imidazole. This catalytic regulation enables full control over ester yield and lifetime. This fuel-driven strategy was expanded to a responsive polymer system, where transient polymer conformation and aggregation are controlled through fuel and catalyst levels. Altogether, we show that organocatalysis can be used to control a man-made fuel-driven system and induce a change in a macromolecular superstructure, as in natural non-equilibrium systems.     

Electron Transfer in the Cs⊂{Mn4Fe4} Cubic Switch: A Soluble Molecular Model of the MnFe Prussian-Blue Analogues

A mixed-valence {Mn^II₃Mn^IIIFe^II₂Fe^III₂} cyanide-bridged molecular cube hosting a caesium cation, Cs⊂{Mn₄Fe₄}, was synthesized and structurally characterized by X-ray diffraction. Cyclic-voltammetry measurements show that its electronic state can be switched between five different redox states, which results in a remarkable electrochromic effect. Magnetic measurements on fresh samples point to the occurrence of a spin-state change near room temperature, which could be ascribed to a metal-to-metal electron transfer converting the {Fe^II−CN−Mn^III} pair into a {Fe^III−CN−Mn^II} pair. This feature was only previously observed in the polymeric MnFe Prussian-blue analogues (PBAs). Moreover, this novel switchable molecule proved to be soluble and stable in organic solvents, paving the way for its integration into advanced materials.     

Mono- and Di-Fucosylated Glycans of the Parasitic Worm S. mansoni are Recognized Differently by the Innate Immune Receptor DC-SIGN

The parasitic worm, Schistosoma mansoni, expresses unusual fucosylated glycans in a stage-dependent manner that can be recognized by the human innate immune receptor DC-SIGN, thereby shaping host immune responses. We have developed a synthetic approach for mono- and bis-fucosylated LacdiNAc (LDN-F and LDN-DF, respectively), which are epitopes expressed on glycolipids and glycoproteins of S. mansoni. It is based on the use of monosaccharide building blocks having carefully selected amino-protecting groups, facilitating high yielding and stereoselective glycosylations. The molecular interaction between the synthetic glycans and DC-SIGN was studied by NMR and molecular modeling, which demonstrated that the α1,3-fucoside of LDN-F can coordinate with the Ca²⁺-ion of the canonical binding site of DC-SIGN allowing for additional interactions with the underlying LDN backbone. The 1,2-fucoside of LDN-DF can be complexed in a similar manner, however, in this binding mode GlcNAc and GalNAc of the LDN backbone are placed away from the protein surface resulting in a substantially lower binding affinity. Glycan microarray binding studies showed that the avidity and selectivity of binding is greatly enhanced when the glycans are presented multivalently, and in this format Le^x and LDN-F gave strong responsiveness, whereas no binding was detected for LDN-DF. The data indicates that S. mansoni has developed a strategy to avoid detection by DC-SIGN in a stage-dependent manner by the addition of a fucoside to a number of its ligands.     

Optical Spectroscopy and Excited-State Dynamics of Eu3+-Doped Bismuth Borate Glasses Containing CuO

Bismuth borate glasses containing phosphors and luminescent rare-earths are of interest for applications in light-emitting devices. Herein, the influence of CuO impurities on red-emitting Eu³⁺-doped bismuth borate glasses of the 25Bi₂O₃-15BaO-10Li₂O-50B₂O₃ type was investigated by various spectroscopic methods. The glasses were prepared by the melt-quench technique and characterized by X-ray diffraction (XRD), Fourier transform-infrared (FT-IR) spectroscopy, UV/Vis optical absorption (OA), and photoluminescence (PL) spectroscopy including decay kinetics assessment. The XRD data confirmed the amorphous nature of the glasses whereas FT-IR spectra indicated the basic structural features of trigonal BO₃ units and BO₄ tetrahedra. The OA analysis showed that addition of CuO up to 0.5 mol% results in significant growth of the visible Cu²⁺ absorption band around 715 nm, with slight decrease in the optical band gap energies assessed through Tauc plots. A drastic PL quenching of Eu³⁺ ions emission was evidenced concurring with the detrimental effect of Cu²⁺. The assessment of the Eu³⁺ emission decay curves revealed significant lifetime decrease of the ⁵D₀ emitting state with increasing CuO concentration. An analysis of quenching constants was finally performed comparing results from integrated PL data with the emission decay rates. It is argued that the bismuth borate glass system supports an effective Eu³⁺→Cu²⁺ energy transfer (more so than phosphates) in connection with a strong spectral overlap between Eu³⁺ emission and Cu²⁺ absorption.