Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary     

Measurement of resistant starch by enzymatic digestion in starch and selected plant materials: collaborative study

Interlaboratory performance statistics was determined for a method developed to measure the resistant starch (RS) content of selected plant food products and a range of commercial starch samples. Food materials examined contained RS (cooked kidney beans, green banana, and corn flakes) and commercial starches, most of which naturally contain, or were processed to yield, elevated RS levels. The method evaluated was optimized to yield RS values in agreement with those reported for in vivo studies. Thirty-seven laboratories tested 8 pairs of blind duplicate starch or plant material samples with RS values between 0.6 (regular maize starch) and 64% (fresh weight basis). For matrixes excluding regular maize starch, repeatability relative standard deviation (RSDr) values ranged from 1.97 to 4.2%, and reproducibility relative standard deviation (RSDR) values ranged from 4.58 to 10.9%. The range of applicability of the test is 2-64% RS. The method is not suitable for products with <1% RS (e.g., regular maize starch; 0.6% RS). For such products, RSDr and RSDR values are unacceptably high.     

DNA LESIONS AND DNA DEGRADATION IN MOUSE LYMPHOMA L5178Y CELLS AFTER PHOTODYNAMIC TREATMENT SENSITIZED BY CHLOROALUMINUM PHTHALOCYANINE

Two closely related strains of mouse lymphoma L5178Y cells, LY-R and LY-S, have been found to differ in their sensitivity to the cytotoxic effects of photodynamic treatment (PDT) with chloroaluminum phthalocyanine (CAPC) and red light. Strain LY-R is more sensitive to photodynamic cell killing than strain LY-S. Differences in uptake of CAPC could not account for the differences in cytotoxic effects. There was no marked difference between the two strains in the induction of single-strand breaks (which includes frank single-strand breaks and alkali-labile lesions), but substantially more DNA-protein cross-links were formed in strain LY-R by CAPC and light. Repair of single-strand breaks proceeded with similar kinetics in both strains for the first 30 min post-irradiation, suggesting that these lesions are not responsible for the differential sensitivity of the two strains to the lethal effects of photodynamic treatment. Thereafter, alkaline elution revealed the presence of increasing DNA strand breakage in strain LY-R. DNA degradation, as measured by the conversion of prelabeled [14C] DNA to acid-soluble radioactivity, was more rapid and extensive in strain LY-R.     

Observation of an Unusual Molecular Switching Device. The Position of One 1,2-Dimethylimidazole Switched "On" or "Off" the Rotation of the Other 1,2-Dimethylimidazole in cis,cis,cis-Ru(II)Cl(2)(Me(2)SO)(2)(1,2-dimethylimidazole)(2)

Some cis,cis,cis-RuX(2)(Me(2)SO)(2)(1,2-Me(2)Im)L complexes [L = 1,2-Me(2)Im (1,2-dimethylimidazole) or Me(3)Bzm (1,5,6-trimethylbenzimidazole), X = Cl or Br, and Me(2)SO = S-bonded DMSO] have been synthesized and their rotamers studied in CDCl(3). From 2D NMR data, cis,cis,cis-RuCl(2)(Me(2)SO)(2)(1,2-Me(2)Im)(Me(3)Bzm) has 1,2-Me(2)Im in position "a" (cis to both Me(2)SO's and cis to "b") and Me(3)Bzm in position "b" (trans to one Me(2)SO and cis to the other). There are two stable atropisomers [head-to-tail (HT, 84%) and head-to-head (HH, 16%), defining the aromatic H of Ru-N-C-H as head for both ligands]. Me(3)Bzm has the same orientation in both atropisomers. In this orientation, the unfavorable interligand steric interactions of Me(3)Bzm with the Me(2)SO and 1,2-Me(2)Im ligands appear to be countered by favorable electrostatic attraction between the delta+ N(2)CH moiety of Me(3)Bzm and the delta- cis Cl ligands. The 1,2-Me(2)Im lacks a delta+ N(2)CH group, and its orientation is dominated by steric effects of the 2-Me group. The NMR spectrum of cis,cis,cis-RuCl(2)(Me(2)SO)(2)(1,2-Me(2)Im)(2) is consistent with four rotamers in restricted rotation about both Ru-N bonds: two HH and two HT. 2D NMR techniques (NOESY and ROESY) afforded complete proton signal assignments. The ligand disposition could be assessed from the large chemical shift dispersion of some 1,2-Me(2)Im ligand signals (Delta 0.86-1.52 ppm) arising from cis-1,2-Me(2)Im shielding modulated by deshielding influences of the cis halides. The relative stability of the four rotamers correlates best with steric interactions between the 2-Me groups and the Me(2)SO ligands. The most favorable conformer (46%) is the HH rotamer with both 2-Me groups pointing away from the Me(2)SO ligands. The least favorable conformer (14%) was also HH, but the methyl groups in this case point toward the Me(2)SO ligands. In the HT conformers of intermediate stability ( approximately 20%), one 2-Me group is toward and the other is away from the Me(2)SO ligands. The exchange cross-peaks in the 2D spectra are unusually informative about the dynamic processes in solution; the spectra provide evidence that the rotamers interchange in a definite pattern of succession. Thus, all conceivable exchange pathways are not available. 1,2-Me(2)Im "b" can rotate regardless of the orientation of 1,2-Me(2)Im "a". 1,2-Me(2)Im "a" can rotate only when "b" has the orientation with its 2-Me group directed away from "a". Thus, 1,2-Me(2)Im "b" can switch 1,2-Me(2)Im "a" rotation on or off.     

Addition of elemental selenium to phosphonate carbanions- - a key step in the synthesis of vinylphosphonates. A new synthetic approach to 1,4-dicarbonyl systems.

A convenient synthesis of vinylphosphonates which involves addition of elemental selenium to phosphonate carbanions followed by alkylation and selenoxide elimination is described. A general approach to 1,4-dicarbonyl systems based on diethyl α-methylthiovinylphosphonate is also reported.     

Mechanism of thermal energy charge transfer reactions: rare gas ions reacting with NH3 and PH3

Absolute rate constants and approximate product distributions are presented for the reactions of He⁺, Ne⁺, Ar⁺, Kr⁺, Xe⁺, CO⁺ and CO⁺₂ with NH₃ and PH₃. In all cases, electron transfer is the dominant reaction channel. Hydrogen atom transfer is observed in several systems, but only as a minor product, even when this channel is very exothermic. The magnitude of the absolute rate constants can be correlated with the Franck-Condon factors associated with the reactions in most cases. Several exceptions to this general rule are observed that could not be readily predicted a priori. It is speculated that these reactions proceed via a collision complex.     

Structural Investigation of Guest-to-Host and Ligand-Ligand Interactions in Werner Clathrates of [Ni(4-Etpy)4(NCS)2]⋅ nG Type (G = Naphthalene Derivatives). The Crystal Structure of [Ni(4-Etpy)4(NCS)2]⋅1-Methylnaphthalene

The stoichiometry and spectral properties of [Ni(4-Etpy)4(NCS)2]nG clathrates have been studied where n = 2 for G = 1-BrN (N = naphthalene), n = 1 or 2 for G = 1-MeN, and n = 0.5 for 2-MeN and 2-BrN. The complexes under study show electronic absorption spectra typical of an octahedral environment of the Ni(II) central atom. The differences found in IR spectra for the (CN) and (Ni–-NNCS) vibrations are discussed. The crystal structure of [Ni(4-Etpy)4(NCS)2]1-MeN was determined by X-ray diffraction and refined to R = 0.0586. Discrete non-centrosymmetric [Ni(4-Etpy)4(NCS)2] molecules form layers of a host structure and the space between the layers is occupied by 1-MeN. The relationship between interatomic distances in the host complex of similar clathrates are discussed.     

α-phosphoryl sulfoxides. X. A general synthesis of optically active α-chlorovinyl sulfoxides

A general and efficient synthesis of enantiomeric α-chlorovinyl p-tolyl sulfoxides 1 using (+)-(S)_C(S)_S-α-chloro-α-dimethoxyphosphorylmethyl p-tolyl sulfoxide as a key substrate for the Horner-Wittig reaction with carbonyl compounds is described. The ratio of geometrical isomers of 1 was determined and briefly investigated. The X-ray diffraction structures of (Z)-1-chloro-1-p-tolylsulfinyl-2-phenyl-ethene and (Z)-1-chloro-1-p-tolylsulfinyl-2-(2-thienyl)-ethene are reported.     

Extraction and analysis of phenolics in food

Phenolics are ubiquitous compounds found in all plants as their secondary metabolites. These include simple phenols, hydroxybenzoic acid and cinnamic acid derivatives, flavonoids, coumarines and tannins, among others. The extraction of phenolics from source materials is the first step involved in their analysis. While chemical methods are used for determination of total content of phenolics, chromatographic and spectrometric analyses are employed for identification and quantification of individual compounds present. This paper provides a summary of background information and methodologies used for the analysis of phenolics in foods and nutraceuticals.