Optimization of Hydrogen‐Evolving Photochemical Molecular Devices

A molecular photocatalyst consisting of a Ru^II photocenter, a tetrapyridophenazine bridging ligand, and a PtX₂ (X=Cl or I) moiety as the catalytic center functions as a stable system for light‐driven hydrogen production. The catalytic activity of this photochemical molecular device (PMD) is significantly enhanced by exchanging the terminal chlorides at the Pt center for iodide ligands. Ultrafast transient absorption spectroscopy shows that the intramolecular photophysics are not affected by this change. Additionally, the general catalytic behavior, that is, instant hydrogen formation, a constant turnover frequency, and stability are maintained. Unlike as observed for the Pd analogue, the presence of excess halide does not affect the hydrogen generation capacity of the PMD. The highly improved catalytic efficiency is explained by an increased electron density at the Pt catalytic center, this is confirmed by DFT studies.     

Multi‐responses Methodology Applied in the Electroanalytical Determination of Hair Dye by Using Printed Carbon Electrode Modified with Graphene

This paper describes a rapid and sensitive method for determination of the hair dye Basic Blue 41 in wastewater samples using screen‐printed carbon electrodes modified with graphene (SPCE/Gr). The method is based on the reversible reduction of azo groups of the dye at potential of ?0.23 V/?0.26 V, where both the anodic and cathodic currents increased 1,300 % when compared to screen‐printed carbon (SPCE) and glassy carbon electrodes (GCE). The optimization of a square wave voltammetric method was performed by means of 2³ factorial design, Doehlert matrix and multi‐response assays, and the best parameters were: frequency (54.8 Hz), step potential (6 mV), pulse amplitude (43.7 mV) and pH 4.5. The analytical curve was constructed from 3.00×10^?8 to 2.01×10^?6 mol L^?1, with detection and quantification limits of 5.00×10^?9 and 1.70×10^?8 mol L^?1, respectively. The repeatability of the method evaluated for 10 consecutive measurements at concentrations of 1.70×10^?7 mol L^?1 and 1.70×10^?6 mol L^?1, showed relative standard deviation of 3.56 and 0.57 %, respectively. The sensor based in SPCE/Gr was successfully applied in wastewater samples collected from a drinking water treatment plant and validated by comparison with HPLC‐DAD method with good accuracy.     

Modulation of the lowest metal-to-ligand charge-transfer state in [Ru(bpy)2(N-N)]2+ systems by changing the N-N from hydrazone to azine: photophysical consequences

Two Ru(II) complexes, [Ru(bpy)2L](ClO4)2 (1) and [Ru(bpy)2L'](BF4)2 (2), where bpy is 2,2'-bipyridine, L is diacetyl dihydrazone, and L' 1:2 is the condensate of L and acetone, are synthesized. From X-ray crystal structures, both are found to contain distorted octahedral RuN(6)(2+) cores. NMR spectra show that the cations in 1 and 2 possess a C2 axis in solution. They display the expected metal-to-ligand charge transfer (1MLCT) band in the 400-500 nm region. Complex 1 is nonemissive at room temperature in solution as well as at 80 K. In contrast, complex 2 gives rise to an appreciable emission upon excitation at 440 nm. The room-temperature emission is centered at 730 nm (lambda(em)(max)) with a quantum yield (Phi(em)) of 0.002 and a lifetime (tau(em)) of 42 ns in an air-equilibrated methanol-ethanol solution. At 80 K, Phi(em) = 0.007 and tau(em) = 178 ns, with a lambda(em)(max) of 690 nm, which is close to the 0-0 transition, indicating an 3MLCT excited-state energy of 1.80 eV. The radiative rate constant (5 x 10(4) s(-1)) at room temperature and 80 K is almost temperature independent. From spectroelectrochemistry, it is found that bpy is easiest to reduce in 2 and that L is easiest in 1. The implications of this are that in 2 the lowest (3)MLCT state is localized on a bpy ligand and in 1 it is localized on L. Transient absorption results also support these assignments. As a consequence, even though 2 shows a fairly strong and long-lived emission from a Ru(II) --> bpy CT state, the Ru(II) --> L CT state in 1 shows no detectable emission even at 80 K.     

Dynamic properties of soy globulin adsorbed films at the air-water interface

In this paper we present surface dilatational properties of soy globulins (beta-conglycinin, glycinin, and reduced glycinin with 10 mM of dithiothreitol (DTT)) adsorbed onto the air-water interface, as a function of adsorption time. The experiments were performed at constant temperature (20 degrees C), pH (8.0), and ionic strength (0.05 M). The surface rheological parameters were measured as a function of protein concentration (ranging from 1 to 1x10(-3)% wt/wt). We found that the surface dilatational modulus, E, increases, and the phase angle, phi, decreases with time, theta, which may be associated with protein adsorption. These phenomena have been related to protein adsorption, unfolding, and/or protein-protein interactions (at long-term adsorption) as a function of protein concentration in solution. From a rheological point of view, the surface viscoelastic characteristics of soy globulin films adsorbed at the air-water interface are practically elastic. The main conclusion is that the dilatational properties of the adsorbed films depend on the molecular structure of the protein.     

Two new marine sediment standard reference materials (SRMs) for the determination of organic contaminants

Two new marine sediment standard reference materials (SRMs), SRM 1941b Organics in Marine Sediment and SRM 1944 New York/New Jersey Waterway Sediment, have been recently issued by the National Institute of Standards and Technology (NIST) for the determination of organic contaminants including polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyl (PCB) congeners, and chlorinated pesticides. Both sediment SRMs were analyzed using multiple analytical methods including gas chromatography/mass spectrometry (GC/MS) on columns with different selectivity, reversed-phase liquid chromatography with fluorescence detection (for PAHs only), and GC with electron capture detection (for PCBs and pesticides only). SRM 1941b has certified concentrations for 24 PAHs, 29 PCB congeners, and 7 pesticides, and SRM 1944 has certified concentrations for 24 PAHs, 29 PCB congeners, and 4 pesticides. Reference concentrations are also provided for an additional 58 (SRM 1941b) and 39 (SRM 1944) PAHs, PCB congeners, and pesticides. SRM 1944, which was collected from multiple sites within New York/New Jersey coastal waterways, has contaminant concentrations that are generally a factor of 10–20 greater than SRM 1941b, which was collected in the Baltimore (Maryland) harbor. These two SRMs represent the most extensively characterized marine sediment certified reference materials available for the determination of organic contaminants.Electronic Supplementary Material Supplementary material is available in the online version of this article at . A link in the frame on the left on that page takes you directly to the supplementary material.     

Current status of biodiesel development in Brazil

In recent years, the concept of producing biodiesel from renewable lipid sources has regained international attention. In Brazil, a national program was launched in 2002 to evaluate the technical, economic, and environmental competitiveness of biodiesel in relation to the commercially available diesel oil. Several research projects were initiated nationwide to investigate and/or optimize biodiesel production from renewable lipid sources and ethanol derived from sugarcane (ethyl esters). Once implemented, this program will not only decrease our dependence on petroleum derivatives but also create new market opportunities for agribusiness, opening new jobs in the countryside, improving the sustainability of our energy matrix, and helping the Brazilian government to support important actions against poverty. This article discusses the efforts to develop the Brazilian biodiesel program in the context of technical specifications as well as potential oilseed sources.     

Study on metal complexes of chelating resins bearing iminodiacetate groups

Cu(II), Co(II) and Ni(II) complexes of chelating resins (CR) bearing iminodiacetate (IDA) ligands were prepared. The CR-metal complexes were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), thermal behavior (TG and DTG) under nitrogen atmosphere, and electron paramagnetic resonance (EPR). FT-IR spectra of the CR-metal complexes showed the characteristic bands of CR were still present but red-shifted after the metal complexation, and new bands assigned to Me-N bonds were observed. Thermal behavior of the metal-CR complexes supported the metal complexation, metal complexation leading to the decrease of the thermal stability of the CR, the lowest thermal stability being found when the highest amount of Cu(II) was loaded. Based on the EPR results and the thermal behavior of Cu(II)-CR complexes, the scheme for the complexation of Cu(II) on the CR was suggested.     

Investigation of anthropic effects connected with metal ions concentration, organic matter and grain size in Bormida river sediments

An investigation on the sediment composition and grain size was carried out along the Bormida river (Piedmont, Northern Italy). The samples were taken both in the riverbed and on its banks. Multivariate statistical exploratory methods permitted to identify possible sources of primary pollution. In particular, principal component analysis (PCA) showed that there are probably at least three anthropogenic main causes of pollution, one connected with Cr, Ni and Sn, the second with cadmium and the last one with mercury. Some correlations were found between heavy metal ion concentrations and organic matter and/or the sediment grain size. Differences between the samples collected in the riverbed and on the banks were identified and the relationships between the principal components and the distance of the samples from the riverbed and from the hot spot represented by the ACNA industrial site were also analyzed.     

Comparison of photodynamic efficacy of tetraarylporphyrin pegylated or encapsulated in liposomes: In vitro studies

Two photosensitizing systems: (1) tetrakis(4-hydroxyphenyl)porphyrin (p-THPP) encapsulated in sterically stabilized liposomes (SSL) and (2) p-THPP functionalized by covalent attachment of poly(ethylene glycol) (p-THPP–PEG₂₀₀₀) were studied in vitro. The dark and photo cytotoxicity of these systems were evaluated on two cell lines: HCT 116, a human colorectal carcinoma cell line, and DU 145, a prostate cancer cell line and compared with these determined for free p-THPP. It was demonstrated that both encapsulation in liposomes as well as attachment of PEG chain result in pronounced reduction of the dark cytotoxicity of the parent porphyrin. The liposomal formulation showed higher than p-THPP–PEG₂₀₀₀ photocytotoxicity towards both cell lines used in the studies.     

A comparative study of calibration transfer methods for determination of gasoline quality parameters in three different near infrared spectrometers

This work presents a comparative study of calibration transfer among three near infrared spectrometers for determination of naphthenes and RON (Research Octane Number) in gasoline. Seven transfer methods are compared: direct standardization (DS), piecewise direct standardization (PDS), orthogonal signal correction (OSC), reverse standardization (RS), piecewise reverse standardization (PRS), slope and bias correction (SBC) and model updating (MU). Two pre-treatment procedures, namely standard normal variate (SNV) and multiplicative scatter correction (MSC), are also investigated. The choice of an appropriate number of transfer samples for each technique, as well as the effect of window size in PDS/PRS and OSC components, are discussed. A broad set of gasoline samples representative of the Northeastern states of Brazil is employed in the investigation. The results show that the use of calibration transfer yields prediction errors comparable to those obtained with complete recalibration of the secondary instrument. Overall, the results point to RS as the best method for the analytical problem under consideration. When storage and/or physical transportation of transfer samples are impractical, MU is more appropriate. The comprehensive investigation carried out in the present work will be of value for practitioners involved in networks of fuel monitoring.