Multi-stacked organic light-emitting diodes using zinc oxide nanoparticle interfacial layers

Stacked organic light-emitting diodes (SOLEDs) with 30-nm nanoparticle (NP) interfacial layers were investigated. Zinc oxide (ZnO) was used as an interfacial layer between two green polymer (GP) layers. SOLEDs with NP interfacial layers had higher device efficiency than did a single-unit device due to the high probability of exciton recombination that originated from the Auger electron-assisted energy up-conversion process. Although the current density and luminance of SOLEDs with ZnO NP interfacial layers were smaller than those of the reference device, the efficiency was doubled because of the big band alignment difference and the large band gap between GP and ZnO NP interfacial layers, which induced more radiative-exciton recombination.     

Annealing-free Poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester-based organic solar cells

We report on the fabrication of efficient annealing-free organic solar cells using co-solvent solution considered as a promising method for low-cost and time-saving manufacturing. Higher device efficiency could be obtained compared to the pure solvent casted device, resulting from the improved crystallinity, optical absorption and transport properties. The power conversion efficiency of 2.8% was obtained, demonstrating the feasibility of achieving low-cost and high-efficiency organic solar cells without any additional treatment and processing additives.     

Determination of mazindol in human oral fluid by high performance liquid chromatography–electrospray ionization mass spectrometry

Brazil is one of the countries most affected by abuse of stimulant medications by professional drivers, especially fenproporex, amfepramone and mazindol. Even though their sale is banned, they can be found in illegal markets, such as those located on the country's borders. The use of oral fluid to monitor drug levels has many advantages over plasma and urine because it is noninvasive, easier to collect and more difficult to adulterate. The aim of this study was to develop and validate a sensitive and specific method to quantify mazindol in human oral fluid by liquid chromatography–mass spectrometry (LC‐MS). The LC system consisted of an LC‐MS system operated in selected ion monitoring mode. The mobile phase was composed of water at pH 4.0, acetonitrile and methanol (60:15:25 v/v/v) at a flow rate of 1.0 mL/min and propranolol was used as internal standard. Total running time was 10 min. The lower limit of quantification was 0.2 ng/mL and the method exhibited good linearity within the 0.2–20 ng/mL range (r = 0.9987). A rapid, specific, sensitive, linear, precise and accurate method was developed for determination of mazindol in human oral fluid according to European Medicines Agency guidelines, and is suitable for monitoring mazindol levels in oral fluid of professional drivers. Copyright © 2014 John Wiley & Sons, Ltd.     

Electrochemical characterisation of a Zn/(PEO)4ZnCl2/Nb2O5 solid-state cell

The (PEO)₄ZnCl₂ electrolyte (PEO, polyethylene oxide) was studied in view of its potential application in a solid-state rechargeable zinc cell. The electrochemical stability window was established, and decomposition voltage values between 3.19 (20 °C) and 1.44 V (150 °C) were estimated. Cyclic voltammetry studies using a Pt/(PEO)₄ZnCl₂/Pt cell indicated reversibility of the Zn²⁺/Zn couple at the electrode/electrolyte interface. Laboratory cells Zn(−)/(PEO)₄ZnCl₂/Nb₂O₅(+) were assembled and studied at 55 °C, under various discharge current densities. Results of cell discharge profiles, capacity values, charge–discharge cycles and cell stabilities are reported.     

Optimization and validation of organochlorine compounds in adipose tissue by SPE‐gas chromatography

Scientific evidence has shown an association between organochlorine compounds (OCC) exposure and human health hazards. Concerning this, OCC detection in human adipose samples has to be considered a public health priority. This study evaluated the efficacy of various solid‐phase extraction (SPE) and cleanup methods for OCC determination in human adipose tissue. Octadecylsilyl endcapped (C₁₈‐E), benzenesulfonic acid modified silica cation exchanger (SA), poly(styrene‐divinylbenzene (EN) and EN/RP₁₈ SPE sorbents were evaluated. The relative sample cleanup provided by these SPE columns was evaluated using gas chromatography with electron capture detection (GC–ECD). The C₁₈‐E columns with strong homogenization were found to provide the most effective cleanup, removing the greatest amount of interfering substance, and simultaneously ensuring good analyte recoveries higher than 70%. Recoveries > 70% with standard deviations (SD) < 15% were obtained for all compounds under the selected conditions. Method detection limits were in the 0.003–0.009 mg/kg range. The positive samples were confirmed by gas chromatography coupled with tandem mass spectrometry (GC‐MS/MS). The highest percentage found of the OCC in real samples corresponded to HCB, o,p′‐DDT and methoxychlor, which were detected in 80 and 95% of samples analyzed respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Linear low density polyethylene: Microstructure and sealing properties correlation

The microstructures of four commercial linear low density polyethylenes (LLDPE) were evaluated and correlated with their sealing properties. Atomic Force Microscopy (AFM), Temperature Rising Elution Fractionation (TREF), Differential Scanning Calorimetry (DSC) and Crystallization Analysis Fractionation (CRYSTAF) experiments revealed that the comonomer distribution is one of the main factors that influence the sealing properties. The superior sealing performance showed by metallocene LLDPE samples in comparison to Ziegler-Natta LLDPE samples can be attributed to their well balanced chemical composition distribution.     

A Facile Syntheses of 6-Bicyclo[3.2.1]octanones

Copper oxide-catalyzed decomposition of 1-diazoacetyl-1-methyl-3-methylenecyclohexanes produces strained tricycles whose reduction or hydrolysis affords 6-bicyclo[3.2.1]octanones.