Impact of operational changes on the scaling factors of radioactive wastes from the IEA-R1 research reactor

Nowadays, the scaling factor methodology is widely used in order to estimate the activity concentration of difficult to measure nuclides in low- and intermediate-level waste from nuclear reactors. However, very few experimental studies evaluate how operational changes in the reactors affect scaling factors. The present work examines the impact of operational changes on the scaling factors that were determined for spent ion-exchange resins and spent activated charcoal permanently withdrawn as radioactive wastes from the water cleanup system of the IEA-R1 nuclear research reactor.     

Radon gas activity measurements in the frame of an international comparison

In order to validate its original method for the radon gas activity standardization and to assure the international metrological traceability and equivalence, the Radionuclide Metrology Laboratory of IFIN-HH participated recently in the international comparison CCRI(II)-K2.Rn-222, organized by the International Committee for Weights and Measures—CIPM-CCRI(II)-Radionuclide Measurements. The radon gas sample received, the measurement equipment and the experimental procedures are described. Because the comparison is underway, the results are presented only as relative values to the liquid scintillator vial measurement result. The uncertainty budget of the measurements performed is provided.     

Determination of selected trace elements in marine biota samples with the application of fast temperature programs and solid sampling continuous source high resolution atomic absorption spectroscopy: method validation

Analytical procedure for the determination of As, Cd, Cu, Ni, Co and Cr in marine biota samples using solid sampling high-resolution continuum source atomic absorption spectrometry (HR CS AAS) and accelerated fast temperature programmes has been developed. Calibration technique based on the use of solid certified reference materials similar to the nature of the analysed sample and statistics of regression analysis were applied. A validation approach in line with the requirements of ISO 17025 standard and Eurachem guidelines was followed. Accordingly, blanks, selectivity, calibration, linearity, working range, trueness, repeatability and reproducibility, limits of detection and quantification and expanded uncertainty for all investigated elements were assessed. The major contributors to the combined uncertainty of the analyte mass fractions were found to be the homogeneity of the samples and the microbalance precision. Traceability to the SI system of units of the obtained with the proposed analytical procedure results was also demonstrated. The potential of the proposed analytical procedure based on solid sampling HR CS AAS technique was demonstrated by direct analysis of marine reference biota samples. Overall, the use of solid sampling HR CS AAS permits obtaining significant advantages for the determination of selected trace elements in marine biota samples, such as straightforward calibration, a high sample throughput, sufficient precision, a suitable limit of detection and reduced risk of analyte loss and contamination.     

Immobilization and Stabilization of Beta-Xylosidases from Penicillium janczewskii

β-Xylosidases are critical for complete degradation of xylan, the second main constituent of plant cell walls. A minor β-xylosidase (BXYL II) from Penicillium janczewskii was purified by ammonium sulfate precipitation (30% saturation) followed by DEAE-Sephadex chromatography in pH 6.5 and elution with KCl. The enzyme presented molecular weight (MW) of 301 kDa estimated by size exclusion chromatography. Optimal activity was observed in pH 3.0 and 70–75 °C, with higher stability in pH 3.0–4.5 and half-lives of 11, 5, and 2 min at 65, 70, and 75 °C, respectively. Inhibition was moderate with Pb⁺² and citrate and total with Cu⁺², Hg⁺², and Co⁺². Partially purified BXYL II and BXYL I (the main β-xylosidase from this fungus) were individually immobilized and stabilized in glyoxyl agarose gels. At 65 °C, immobilized BXYL I and BXYL II presented half-lives of 4.9 and 23.1 h, respectively, therefore being 12.3-fold and 33-fold more stable than their unipuntual CNBr derivatives (reference mimicking soluble enzyme behaviors). During long-term incubation in pH 5.0 at 50 °C, BXYL I and BXYL II glyoxyl derivatives preserved 85 and 35% activity after 25 and 7 days, respectively. Immobilized BXYL I retained 70% activity after 10 reuse cycles of p-nitrophenyl-β-D-xylopyranoside hydrolysis.

     

Characterisation of non-linear viscoelastic foods by the indentation technique

A method to determine the non-linear viscoelastic constitutive constants from indentation force–displacement data corresponding to different indentation speeds has been developed. The method consists of two parts. In the first part, the force–displacement data is expressed as two functions which represent the strain and the time-dependent responses, respectively. From these functions, the time-dependent constants and the instantaneous force–displacement response are obtained. In the second part, the strain-dependent variables are determined from the instantaneous force–displacement response through an inverse analysis based on the Levenberg–Marquardt method. The method was verified by numerical experiments using the properties of cheese as examples.     

Protein-loaded PLGA–PEO blend nanoparticles: encapsulation, release and degradation characteristics

The aim of this work was to study the variables that affect the encapsulation and release of proteins from nanoparticles based on poly(lactic-co-glycolic acid; PLGA)–poloxamer and PLGA–poloxamine blend matrices, using bovine serum albumin (BSA) and immuno-γ-globulin (IgG) as model proteins. The nanoparticles were prepared by a solvent diffusion technique, and the studied variables were (1) PLGA molecular weight, (2) type of PEO-block copolymers, (3) protein loading, (4) pH and, (5) volume of the protein solution. Our results showed that the proteins can be efficiently incorporated into and released from the blend matrices. The type of the PEO derivative and the pH of the internal aqueous phase were the most important factors influencing protein encapsulation and release kinetics. Moreover, comparative degradation study of PLGA, PLGA–poloxamer and PLGA–poloxamine nanoparticles confirmed that the degradation and release characteristics of polyester particles can be improved by the incorporation of polyoxyethylene derivatives with different hydrophilia–lipophilia balance.     

Characterization of particles made by desolvation of monodisperse microdroplets of analyte solutions and particle suspensions for nanoparticle calibration in inductively coupled plasma spectrometry

Particles produced by low-temperature desolvation of monodisperse microdroplets of analyte standard solution and nanoparticle suspensions in argon were collected on Si-wafers and studied applying scanning electron microscopy and X-ray microprobe techniques. At desolvation temperatures of about 150 °C, the particles from standard solutions are most often spherical and solid with good reproducibility and the analyte elements together with the unavoidable accompanying elements from trace contamination seem to be homogeneously distributed in the particles. However, there are surprising exceptions, particularly at higher temperatures, where analyte elements are separated in the particle by reduction or crystallization, as shown with Au and Ca standard solutions, respectively. Drying droplets of a diluted suspension of 250 nm gold particles at 200 °C revealed another interesting result, the production of relatively stable concave balloons of ∼ 3 µm in diameter including the Au particles. The balloon sheath was formed of compounds made of the contaminant elements in the suspension. The morphology of the particles is discussed in consideration of the Peclet number, the ratio of evaporation rate to analyte diffusion coefficient. The consequences of particle size and morphology for calibration purposes in nanoparticle characterization by ICP spectrometry are discussed.     

PS-b-PEO block copolymer thin films as structured reservoirs for nanoscale precipitation reactions

Thin films of PS-b-PEO block copolymers were utilized as structured reservoirs for localized nanoscale precipitation reactions. By consecutively immersing the film into solutions of thioacetamide and cadmium chloride, we were able to obtain a monolayer of cadmium sulfide nanostructures on top of the block copolymer film. AFM and grazing incidence small angle X-ray scattering revealed spherical nanostructures (d = 15 nm) corresponding to the dimensions given by the block copolymer film. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1569–1573, 2010     

A new controlled release system of chlorhexidine and chlorhexidine:βcd inclusion compounds based on porous silica

The purpose of this study was to prepare and characterize a controlled release system based on porous silica loaded with chlorhexidine (Cx) and its inclusion compounds in β-cyclodextrin (βcd), and to evaluate its antimicrobial activity. Acetate chlorhexidine (CxA), gluconate chlorhexidine (CxG), βcd:chlorhexidine acetate 2:1 (βcd:CxA) and βcd:chlorhexidine gluconate 2:1 (βcd:CxG) were incorporated into porous silica. Drug loading was characterized by FTIR, powder X-ray diffraction, thermal analysis and BET, and was shown to be in an amorphous state and porous matrix. The kinetics release parameter of the drug was established, which showed that the Cx systems release profile followed zero order release until 400 h and Higuchi model release until 750 h, after the burst effect at the first 8 h. Chlorhexidine therapeutic range was reached near first hour for all systems. The chlorhexidine porous silica system was biologically active against Enterococcus faecalis and Candida albicans in vitro. The systems showed an efficient Cx controlled release modulated by the presence of the β-cyclodextrin and by the porous silica matrices, providing effective antimicrobial activity.     

Microwave-assisted synthesis of 3-hydroxy-4-pyridinone/naphthalene conjugates. Structural characterization and selection of a fluorescent ion sensor

Two novel 3-hydroxy-4-pyridinone/naphthalene conjugates (L1 and L2) with different distances between the chelating and the fluorescent moieties were synthesized using conventional heating and microwave irradiation achieving a shorter reaction time. The structure of both compounds was confirmed by X-ray crystallography, revealing that these compounds were isolated as hydrochloride salts in dihydroxypyridinium forms. In solution and in the presence of a base, the tautomeric keto forms may be obtained as it was elucidated by NMR analysis. The dihydroxypyridinium form of L1 exhibits fluorescence at 450 nm, both in ACN and DMSO, whereas the corresponding keto form exhibits fluorescence at 365 nm. In contrast, the dihydroxypyridinium form of L2 only fluoresces in DMSO, exhibiting a band at 340 nm, while the keto form is non-fluorescent. These distinct fluorescent behaviors reveal that the tautomeric form in which the ligands are isolated and the distance between the chelating and fluorescent functions strongly influences their fluorescence properties. Ligand L1 exhibits better fluorescence properties and its fluorescence intensity is quenched in the presence of variable concentration of Cu²⁺, Zn²⁺, and Fe³⁺, thus making it suitable to be used as ion sensor.