Liquid chromatography-particle beam electron ionization mass spectrometry method for analysis of botanical extracts: evaluation of ephedrine alkaloids in standard reference materials

The preliminary validation of a high-performance liquid chromatography particle beam mass spectrometry method (HPLC-PB/MS) with electron impact ionization source for analysis of botanical extracts is presented. The LC-PB/MS system was evaluated for the analysis of ephedrine alkaloids using ephedra-containing National Institute of Standards and Technology dietary supplement standard reference materials (SRMs) 3241 Ephedra Sinica Stapf Native Extract and 3242 Ephedra Sinica Stapf Commercial Extract. The ephedrine alkaloids were separated by reversed-phase chromatography using a phenyl column at room temperature. A linear gradient method with a mobile phase composition varying from 5:95 [MeOH:0.1% trifluoroacetic acid (TFA) in water] to 20:80 (MeOH:0.1% TFA in water) at a flow rate of 1.0 ml/min, with an analysis time of less than 20 min, was used. The source block temperature was evaluated to determine the optimal operating conditions by monitoring the intensities and fragmentation patterns of the ephedrine alkaloids. Ephedrine and N-methylephedrine were taken as a representative of the test alkaloids. The LODs on the sub-nanogram level were achieved, with ephedrine, pseudoephedrine, and methylephedrine in the SRMs quantified by a standard addition method with recoveries of > or = 86% and RSDs of < or = 14% (n = 3).     

Hydrodefluorination of non-activated C-F bonds by diisobutyl-aluminiumhydride via the aluminium cation [i-Bu2Al]

A novel system for the hydrodefluorination (HDF) of non-activated C-F bonds at room-temperature is described. The reaction of i-Bu₂AlH with [Ph₃C][B(C₆F₅)₄] (1), [Ph₃C][Al(C₆F₅)₄] (2) and [Ph₃C][Al{OC(CF₃)₃}₄] (3) as precatalysts leads under formation of triphenylmethane to the aluminium cation [i-Bu₂Al]⁺ and the non-coordinating anions [M(C₆F₅)₄]⁻ (M = B, Al) and [Al{OC(CF₃)₃}₄]⁻. The formed aluminium cation is very reactive towards C-F bonds and easily forms i-Bu₂AlF releasing a carbocation that abstracts the hydride of excess i-Bu₂AlH and yields the corresponding hydrocarbon. Thereby, the active species [i-Bu₂Al]⁺ is regenerated and can realize a catalytic cycle. For 1-fluorohexane as an example including non-activated C-F bonds different activities were found (TON: 1: 20; 2: 12; 3: 30) in cyclohexane as solvent.     

Issues of ligand accessibility and mobility in initial cell attachment

The influence of lateral ligand mobility on cell attachment and receptor clustering has previously been explored for membrane-anchored molecules involved in cell-cell adhesion. In this study, we considered instead a cell binding motif from the extracellular matrix. Even though the lateral mobility of extracellular matrix ligands in membranes does not occur in vivo, we believe it is of interest for cell engineering in vitro. As is the case for cell-cell adhesion molecules, lateral mobility of extracellular matrix ligands could influence cell attachment and, subsequently, cell behavior in cell culture. In this paper, the accessibility and functionality of extracellular matrix ligands presented at surfaces were evaluated for the conditions of laterally mobile versus non-mobile ligands by studying ligand-antibody binding events and early cell attachment as a function of ligand concentration. We compare the initial attachment of rat-derived adult hippocampal progenitor (AHP) cells on laterally mobile, supported phospholipid bilayer membranes to non-mobile, poly-L-lysine-grafted-poly(ethylene glycol) (PLL-g-PEG) polymer films functionalized with a range of laminin-derived IKVAV-containing peptide densities. To this end, synthesis of a new PLL-g-PEG/PEG-IKVAV polymer is described. The characterization of available IKVAV peptides on both surface presentations schemes was explored by studying the mass uptake of anti-IKVAV antibodies using a combination of the surface-sensitive techniques quartz crystal microbalance with dissipation monitoring, surface plasmon resonance spectroscopy, and optical waveguide lightmode spectroscopy. IKVAV-containing peptides presented on laterally mobile, supported phospholipid bilayers and non-mobile PLL-g-PEG were recognized by the anti-IKVAV antibody in a dose-dependent manner, indicating that the amount of available IKVAV ligands increases proportionally with ligand density over the concentrations tested. Attachment of AHP cells to IKVAV-functionalized PLL-g-PEG and supported phospholipid bilayers followed a sigmoidal dependence on peptide concentration, with a critical concentration of approximately 3 pmol/cm2 IKVAV ligands required to support initial AHP cell attachment for both surface modifications. There appeared to be little influence of IKVAV peptide mobility on the initial attachment of AHP cells. Although the spread in the cell attachment data was larger for the PLL-g-PEG surface modification, this was reduced when observed after 24 h, indicating that the cells might need longer times to establish attachment strengths equivalent to those observed on peptide-functionalized supported lipid bilayers. The present study is a step toward understanding the influence of extracellular-matrix-derived ligand mobility on cell fate. Further analysis should focus on the systematic tuning of lateral ligand diffusion, as well as a comparison between the response of non-spreading cells (i.e., AHPs), versus spreading cells (i.e., fibroblasts).     

Exploring Regioselective Bond Cleavage and Cross‐Coupling Reactions using a Low‐Valent Nickel Complex

Recently, esters have received much attention as transmetalation partners for cross‐coupling reactions. Herein, we report a systematic study of the reactivity of a series of esters and thioesters with [{(dtbpe)Ni}₂(μ‐η²:η²‐C₆H₆)] (dtbpe=1,2‐bis(di‐tert‐butyl)phosphinoethane), which is a source of (dtbpe)nickel(0). Trifluoromethylthioesters were found to form η²‐carbonyl complexes. In contrast, acetylthioesters underwent rapid C_acyl?S bond cleavage followed by decarbonylation to generate methylnickel complexes. This decarbonylation could be pushed backwards by the addition of CO, allowing for regeneration of the thioester. Most of the thioester complexes were found to undergo stoichiometric cross‐coupling with phenylboronic acid to yield sulfides. While ethyl trifluoroacetate was also found to form an η²‐carbonyl complex, phenyl esters were found to predominantly undergo C_aryl?O bond cleavage to yield arylnickel complexes. These could also undergo transmetalation to yield biaryls. Attempts to render the reactions catalytic were hindered by ligand scrambling to yield nickel bis(acetate) complexes, the formation of which was supported by independent syntheses. Finally, 2‐naphthyl acetate was also found to undergo clean C_aryl?O bond cleavage, and although stoichiometric cross‐coupling with phenylboronic acid proceeded with good yield, catalytic turnover has so far proven elusive.     

Multifunctionalization of dendrimers through orthogonal transformations

A straightforward methodology for the synthesis of multifunctionalized dendrimers that is based on an orthogonal functionalization strategy has been developed. Polyamide-based dendrimers that possess both a single aldehyde and a single azide moiety on their periphery have been synthesized by using a convergent synthetic strategy. These dendrimers can be functionalized quantitatively with small organic and biological molecules that contain hydrazide and/or alkyne groups in which each functional moiety is completely specific for its complementary motif. This orthogonal functionalization strategy has the potential to be used to synthesize multifunctional dendrimers for a variety of applications, which range from targeted biological delivery vehicles to optical materials.     

Bis(phosphinimino)methanide rare earth amides: synthesis, structure, and catalysis of hydroamination/cyclization, hydrosilylation, and sequential hydroamination/hydrosilylation

A series of yttrium and lanthanide amido complexes [Ln{N(SiHMe(2))2}2{CH(PPh(2)NSiMe(3))2}] (Ln=Y, La, Sm, Ho, Lu) were synthesized by three different pathways. The title compounds can be obtained either from [Ln{N(SiHMe(2))2}3(thf)2] and [CH(2)(PPh(2)NSiMe(3))2] or from KN(SiHMe(2))2 and [Ln{CH(PPh(2)NSiMe(3))2}Cl(2)]2, while in a third approach the lanthanum compound was synthesized in a one-pot reaction starting from K{CH(PPh(2)NSiMe(3))2}, LaCl3, and KN(SiHMe(2))2. All the complexes have been characterized by single-crystal X-ray diffraction. The new complexes, [Ln{N(SiHMe(2))2}2{CH(PPh(2)NSiMe(3))2}], were used as catalysts for hydroamination/cyclization and hydrosilylation reactions. A clear dependence of the reaction rate on the ionic radius of the center metal was observed, showing the lanthanum compound to be the most active one in both reactions. Furthermore, a combination of both reactions--a sequential hydroamination/hydrosilylation reaction--was also investigated.     

Simulating water with the self-consistent-charge density functional tight binding method: from molecular clusters to the liquid state

The recently developed self-consistent-charge density functional tight binding (SCCDFTB) method provides an accurate and inexpensive quantum mechanical solution to many molecular systems of interests. To examine the performance of the SCCDFTB method on (liquid) water, the most fundamental yet indispensable molecule in biological systems, we report here the simulation results of water in sizes ranging from molecular clusters to the liquid state. The latter simulation was achieved through the use of the linear scaling divide-and-conquer approach. The results of liquid water simulation indicate that the SCCDFTB method can describe the structural and energetics of liquid water in qualitative agreement with experiments, and the results for water clusters suggest potential future improvements of the SCCDFTB method.     

Memory of surface patterns in mixed polymer brushes: simulation and experiment

The correlation between the morphology of mixed polymer brushes and fluctuations of the grafting points is investigated by single-chain-in-mean-field simulations and experiments. The local topography of two types of mixed polystyrene-polymethylmethacrylate (PS-PMMA) brushes that differ in their modes of attachment has been studied during repeated microphase separation into laterally structured and homogeneous morphologies upon changing solvents. In the first type of brush (conventional), each of the surface-attached initiator groups starts the growth of either a PS or a PMMA chain in a random fashion. In the second case (Y-shaped mixed brushes), two chains of different types are attached to the same anchor group on the substrate. Whereas in the first case statistical fluctuations of the chemical composition occur on a local scale, such composition fluctuations are strongly suppressed in the latter case. The microphase-separated morphology is similar in both cases, but Y-shaped brushes exhibit a significantly weaker domain memory than do conventional PS-PMMA mixed brushes. The results of the experiment are compared with simulations, and a simple phenomenological argument and qualitative agreement are found. The observations demonstrate that small fluctuations in the grafting points are amplified by the microphase separation and nucleate the location of the domains in the mixed brush.