New Ga/N‐based Active Lewis Pairs,Trifunctional Ga–Ga Compounds,Reactions with Cyanamide and Dual Insertion of Isocyanate

Hydrogallation of Me₃Si–C≡C–NR'₂ with R₂Ga–H (R = tBu, CH₂tBu, iBu) yielded Ga/N‐based active Lewis pairs, R₂Ga–C(SiMe₃)=C(H)–NR'₂ ( 7 ). The Ga and N atoms adopt cis‐positions at the C=C bonds and show weak Ga–N interactions. tBu₂GaH and Me₃Si–C≡C–N(C₂H₄)₂NMe afforded under exposure of daylight the trifunctional digallium(II) compound [MeN(C₂H₄)₂N](H)C=C(SiMe₃)Ga(tBu)–Ga(tBu)C(SiMe₃)=C(H)[N(C₂H₄)₂NMe] ( 8 ), which results from elimination of isobutene and H₂ and Ga–Ga bond formation. 8 was selectively obtained from the ynamine and [tBu(H)Ga–Ga(H)tBu]₂[HGatBu₂]₂. 7a (R = tBu; NR'₂ = 2,6‐Me₂NC₅H₈) and H₈C₄N–C≡N afforded the adduct tBu₂Ga‐C(SiMe₃)=C(H)(2,6‐Me₂NC₅H₈) · N≡C–NC₄H₈ ( 11 ) with the nitrile bound to gallium. The analogous ALP with harder Al atoms yielded an adduct of the nitrile dimer or oligomers of the nitrile at room temperature. The reaction of 7a with Ph–N=C=O led to the insertion of two NCO groups into the Ga–C_vinyl bond to yield a GaOCNCN heterocycle with Ga bound to O and N atoms ( 12 ).     

Micelle-enhanced dissociation of a Ru cation /DNA complex

Anionic surfactant monomers have a large catalytic effect on the dissociation rate constant of a Ru2(4+)-DNA complex, an effect further enhanced upon exceeding the critical micelle concentration. Electrostatic estimates are made of this effect, the effect of salt and temperature on the binding constant, and of the binding constant itself. The effects are compared with the experiment, and the calculated salt effect on the binding constant is compared with condensation theory. The results indicate that the catalytic effect is primarily nonelectrostatic (hydrophobic) in nature.     

Single particle versus ensemble average: from power-law intermittency of a single quantum dot to quasistretched exponential fluorescence decay of an ensemble

Light-induced diffusion-controlled electron transfer is proposed as an underlying mechanism for the intermittency (power law and breakdown) of a single quantum dot and ensemble-averaged fluorescence decay. The intensity decay can be approximated to a stretched exponential expression. The physical links to the free energy gap, reorganization energy, electronic coupling, and diffusion correlation times are discussed. A procedure is described for extracting these molecular-based parameters from experiments and is demonstrated with examples using existing data.     

Influence of Perfluoroarene–Arene Interactions on the Phase Behavior of Liquid Crystalline and Polymeric Materials

A stabilization of the liquid-crystalline mesophase and thus an enlarged temperature range of the mesogenic phase is achieved by adding perfluorotriphenylene to a chiral liquid-crystalline triphenylene. This mesophase is based on 1:1 perfluoroarene–arene interactions (see picture). In a polymer with triphenylenes as mesogens in the side chains, the addition of perfluorotriphenylene led to crystallization.     

Synthesis and characterization of polyimides with ether linkages

Thermoplastic and thermoset polyimides derived from 2,2-bis[4-(4-aminophenoxy)phenyl]propane (BAPP) and 4,4′-bis(4-aminophenoxy)-2,2′-dimethylbiphenyl (BAPD) were prepared and characterized. Their physical and thermal properties as well as the polyelectrolyte effect exhibited by BTDA–BAPP polyamic acids in NMP solution were discussed. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2559–2567, 1999     

Microwave-assisted acid hydrolysis of proteins combined with liquid chromatography MALDI MS/MS for protein identification

Simple and efficient digestion of proteins, particularly hydrophobic membrane proteins, is of significance for comprehensive proteome analysis using the bottom-up approach. We report a microwave-assisted acid hydrolysis (MAAH) method for rapid protein degradation for peptide mass mapping and tandem mass spectrometric analysis of peptides for protein identification. It uses 25% trifluoroacetic acid (TFA) aqueous solution to dissolve or suspend proteins, followed by microwave irradiation for 10 min. This detergent-free method generates peptide mixtures that can be directly analyzed by liquid chromatography (LC) matrix-assisted laser desorption ionization (MALDI) mass spectrometry (MS) without the need of extensive sample cleanup. LC-MALDI MS/MS analysis of the hydrolysate from 5 microg of a model transmembrane protein, bacteriorhodopsin, resulted in almost complete sequence coverage by the peptides detected, including the identification of two posttranslational modification sites. Cleavage of peptide bonds inside all seven transmembrane domains took place, generating peptides of sizes amenable to MS/MS to determine possible sequence errors or modifications within these domains. Cleavage specificity, such as glycine residue cleavage, was observed. Terminal peptides were found to be present in relatively high abundance in the hydrolysate, particularly when low concentrations of proteins were used for MAAH. It was shown that these peptides could still be detected from MAAH of bacteriorhodopsin at a protein concentration of 1 ng/microl or 37 fmol/microl. To evaluate the general applicability of this method, it was applied to identify proteins from a membrane protein enriched fraction of cell lysates of human breast cancer cell line MCF7. With one-dimensional LC-MALDI MS/MS, a total of 119 proteins, including 41 membrane-associated or membrane proteins containing one to 12 transmembrane domains, were identified by MS/MS database searching based on matches of at least two peptides to a protein.     

Resolution of seven-coordinate complexes

The crystal structures of [Pr(dbm)3H2O] (1), [Sm(dbm)3H2O] (2), and [Er(dbm)3H2O] (3) have been determined (dbm=dibenzoylmethane). They display seven-coordinate propeller-shaped molecules, which are chiral and crystallize as conglomerates in space group R3. Analysis of the crystal structures reveals supramolecular interactions, including formation of a quadruple helix, which explain how stereochemical information can be transferred between stacks of molecules. A method to quantify the ee in bulk samples of stereochemically labile compounds by using solid-state CD spectroscopy is described. Using this method, it has been shown that compounds 1-3 undergo total spontaneous resolution directly after synthesis, forming a microcrystalline reaction product that is essentially enantiopure. The resolution of bulk quantities of seven-coordinate complexes (without chiral or polydentate ligands) is thus reported for the first time. Because the crystallization starts without seeding, the overall preparation may be regarded as absolute asymmetric synthesis.     

Agreement between experiment and hybrid DFT calculations for O--H bond dissociation enthalpies in manganese complexes

Information on the accuracy of DFT functionals for redox reactions in transition metal systems is rather limited. To analyze the performance of some popular functionals for redox reactions in manganese systems, calculated O--H bond dissociation enthalpies for Mn-ligands in six different complexes are compared to experimental results. In this benchmark, B3LYP performs well with a mean absolute error of 3.0 kcal/mol. B98 gives similar results to B3LYP (error of 3.8 kcal/mol). B3LYP* gives lower O--H bond strengths than B3LYP and has a mean error of 5.0 kcal/mol. Compared to B98 and B3LYP, B3LYP* has an error trend for the manganese ligands that is more similar to the error for a free water molecule. The nonhybrid functional BLYP consistently and significantly underestimates the O--H bond strengths by approximately 20 kcal/mol. HCTH407 has a rather large mean error of 9.4 kcal/mol and shows no consistent trend. The results support the use of hybrid functionals and the present computational method for large model systems containing manganese. An example is the oxygen evolving complex in photosystem II where hybrid functionals predict the appearance of a Mn(IV)-oxyl radical before the O--O bond formation step.     

Surface characterization of three marine bacterial strains by Fourier transform IR, X-ray photoelectron spectroscopy, and time-of-flight secondary-ion mass spectrometry, correlation with adhesion on stainless steel surfaces

Adhesion of bacterial strains on solid substrates is likely related to the properties of the outer shell of the micro-organisms. Aiming at a better understanding and control of the biofilm formation in seawater, the surface chemical composition of three marine bacterial strains was investigated by combining Fourier transform IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and time-of-flight secondary-ion mass spectrometry (ToF-SIMS). The D41 strain surface showed evidence of proteins, as deduced from the NH2 and NCO XPS and ToF-SIMS fingerprints; this strain was found to adhere to stainless steel, glass, or Teflon surfaces in a much higher quantity (2 orders of magnitude) than the two other ones, DA and D01. The latter are either enriched in COOH or sulfates, and this makes them more hydrophilic and less adherent to all substrates. Correlations with physicochemical properties and adhesion seem to demonstrate the role of the external layer composition, in particular the role of proteins more than that of hydrophobicity, on their adhesion abilities.