Flow system to gas capture from a nebulized solution

The use of aerosol produced in a nebulization chamber is proposed as an alternative to gas sample capture in flow systems. This paper describes the coupling of a sampling interface with a flow system, for in situ gas monitoring. Aspects related with the behavior of aerosol formation and gas solubilization in liquid drops are discussed. The method is applied to the determination of residual lime in acidic soils. Aliquots of 5.0 ml of 1.0 mol l⁻¹ HCl were mixed with soil samples (1 g). The CO₂ released from these samples was captured by a nebulized aerosol and determined conductivity. The analytical curve from 1.0×10⁻² to 5.0×10⁻² mol kg⁻¹ CaCO₃ was ploted applying the matrix matching approach. This proposition, allowed an increase in the sensibility with detection limit of 6.0×10⁻³ mol kg⁻¹. The precision was good (R.S.D. <3%) for an analytical frequency of 22 determinations per hour. A fair agreement, at 95% confidence level, was found between the results from the proposed method and certified values of the investigated samples.     

Purification of plasmid DNA vectors by aqueous two-phase extraction and hydrophobic interaction chromatography

The current study explores the possibility of using a polyethyleneglycol(PEG)-ammonium sulphate aqueous two-phase system (ATPS) as an early step in a process for the purification of a model 6.1 kbp plasmid DNA (pDNA) vector. Neutralised alkaline lysates were fed directly to ATPS. Conditions were selected to direct pDNA towards the salt-rich bottom phase, so that this stream could be subsequently processed by hydrophobic interaction chromatography (HIC). Screening of the best conditions for ATPS extraction was performed using three PEG molecular weights (300, 400 and 600) and varying the tie-line length, phase volume ratio and lysate load. For a 20% (w/w) lysate load, the best results were obtained with PEG 600 using the shortest tie-line (38.16%, w/w). By further manipulating the system composition along this tie-line in order to obtain a top/bottom phase volume ratio of 9.3 (35%, w/w PEG 600, 6%, w/w NH4)2 SO4), it was possible to recover 100% of pDNA in the bottom phase with a three-fold increase in concentration. Further increase in the lysate load up to 40% (w/w) with this system resulted in a eight-fold increase in pDNA concentration, but with a yield loss of 15%. The ATPS extraction was integrated with HIC and the overall process compared with a previously defined process that uses sequential precipitations with iso-propanol and ammonium sulphate prior to HIC. Although the final yield is lower in the ATPS-based process the purity grade of the final pDNA product is higher. This shows that it is possible to substitute the time-consuming two-step precipitation procedure by a simple ATPS extraction.     

Voltammetric determination of L-dopa using an electrode modified with trinuclear ruthenium ammine complex (Ru-red) supported on Y-type zeolite

The L-dopa is the immediate precursor of the neurotransmitter dopamine. Unlike dopamine, L-dopa easily enters the central nervous system and is used in the treatment of Parkinson’s disease. A sensitive and selective method is presented for the voltammetric determination of L-dopa in pharmaceutical formulations using a carbon paste electrode modified with trinuclear ruthenium ammine complex [(NH₃)₅Ru^IIIORu^IV(NH₃)₄ORu^III(NH₃)₅]⁶⁺ (Ru-red) incorporated in NaY zeolite. The parameters which influence on the electrode response (paste composition, potential scan rate, pH and interference) were also investigated. The optimum conditions were found to an electrode composition (m/m) of 25% zeolite containing 6.7% Ru, 50% graphite and 25% mineral oil in acetate buffer at pH 4.8. Voltammetric peak currents showed a linear response for L-dopa concentration in the range between 1.2×10⁻⁴ and 1.0×10⁻² mol l⁻¹ (r=0.9988) with a detection limit of 8.5×10⁻⁵ mol l⁻¹. The variation coefficient for a 1.0×10⁻³ mol l⁻¹ L-dopa (n=10) was 5.5%. The results obtained for L-dopa in pharmaceutical formulations (tablet) was in agreement with compared official method. In conclusion, this study has illustrated that the proposed electrode modified with Ru-red incorporated zeolite is suitable valuable for selective measurements of L-dopa.     

Reactions of carbethoxycarbene with enaminones. Formation of unexpected pyrroles

The reactions of carbethoxycarbene (:CH₂-CO₂Et, 2) with several acyclic enaminones (RCOCH=CR¹NHR², 3) lead to the unexpected formation of 2-Me, 3-CO₂Et, 4-H, 5-R¹-pyrroles 4 . Structural variations of the enaminones show that the structural fragments C(3)-CO₂Et and C(2)-Me are provided by 2 and that the fragment C(5)-R¹NHR² originates from the enaminones 3 , while the RCO group from 3 is eliminated during the course of reaction. Reactions with cyclic and nitrogen-hindered enaminones do not lead to pyrrole formation but occur by simple insertion of 2 to the Cα-H bond.     

Photostability of a photochromic naphthopyran dye in different sol-gel prepared ormosil coatings

A photochromic naphthopyran derivative was embedded in sol-gel prepared thin ormosil films. The resulting samples show high transparency and exhibit a strong red colouration upon irradiation with UV light. The photostability of the photochromic molecules is strongly related to the nature of the embedding ormosil matrix. The introduction of organic functional groups into the inner pore surface of the matrix allows tailoring the chemical environment where the dye molecules will be allocated, in terms of the effectiveness of the interaction between the photochromic molecules and the Si-OH groups on the surface of the pores, affecting the stability of the molecules upon prolonged exposition to UV light. The photostability of the molecules was increased in matrices functionalized with larger organic groups, or with larger amount of modifying groups. In this way the photodegradation of the photochromic molecules could be reduced by a factor of 5, as compared with the photodegradation of the molecules in unfunctionalized silica matrix.     

Solvent effect in cis-1,4 polymerization of 1,3-butadiene by a catalyst based on neodymium

In this work a laboratory polymerization scale process was studied for the production of polybutadiene with high content of cis-1,4 repeating units. A Ziegler-Natta catalytic system based on neodymium versatate (catalyst), diisobutylaluminium hydride (cocatalyst) and tert-butyl chloride (chlorinating agent) was used. The influence of solvent nature (pure grade) and possible contaminants (electron donors) in a recovered solvent from a butadiene-styrene anionic polymerization industrial plant on the stereoselectivity and catalytic activity, molecular weight and molecular weight distribution of the resultant polybutadienes was studied. The polymers were characterized by infrared spectroscopy and size exclusion chromatography. Polybutadienes with cis-1,4 units content in the range of 99-98% were produced. The polymers weight-average molecular weight, , varied from 2.23 × 10⁵ to 4.47 × 10⁵ and the molecular weight distribution, MWD, from 3.1 to 5.1.     

Online preconcentration system for determining ultratrace amounts of Cd in vegetal samples using thermospray flame furnace atomic absorption spectrometry

A system has been developed for online preconcentration and determination of Cd using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). It is based on the solid-phase extraction of Cd in an Amberlite XAD-2 minicolumn loaded with 2-(2-thiazolylazo)-5-dimethylaminophenol (TAM), and the metal ion is eluted with 1 mol L⁻¹ hydrochloridric acid, followed by its determination. The online system allows determining Cd with a detection limit of 8.0 ng L⁻¹ and a quantification limit of 25.0 ng L⁻¹. The precision (repeatability), calculated as the relative standard deviation (% RSD) in sample solutions containing 0.5 and 3.0 μg L⁻¹ of Cd, was 6.1 and 4.5%, respectively. The preconcentration factor obtained was 24. The system’s accuracy was confirmed by analyzing the following certified reference materials (CRMs): Rice flour NIES 10b, Apple leaves NIST 1515 and Orchard leaves NBS 1571. This procedure was applied to the determination of Cd in cabbage and powdered guarana samples.     

Factorial design in the optimization of preconcentration procedure for lead determination by FAAS

The present paper proposes a preconcentration procedure for lead determination using flame atomic absorption spectrometry (FAAS). It is based on lead(II) ions extraction as brilliant cresyl blue (BCB) complex and its sorption onto Diaion HP-2MG, a methacrylic ester copolymer. The optimization step was carried out using factorial design and the variables studied were pH, shaking time and reagent concentration. In the established experimental conditions, lead can be determinate with a limit of detection of 3.7 μg L⁻¹ lead (N = 20) and a relative standard deviation of 7% for a lead concentration of 100 μg L⁻¹. The accuracy was confirmed by analysis of a certified reference material, the stream sediment furnished by National Research Centre for Certified Reference Materials (NRCCRM), China (GBW 07310). Effect of other ions in the procedure proposed was also studied. The method was applied for lead determination in real samples of water, tea, soil and dust. Tests of addition/recovery in the experiments for lead determination in water samples revealed that the proposed procedure could be applied satisfactorily for analysis of these samples.     

Fluorometric sensors based on chemically modified enzymes Glucose determination in drinks

In this paper an enzymatic fluorometric sensor for glucose determination in drinks is presented. The sensor film was obtained by immobilisation of glucose oxidase chemically modified with a fluorescein derivative (GOx-FS) in a polyacrylamide polymer. During the enzymatic reaction the changes in the fluorescence intensity of the GOx-FS are related to the glucose concentration. Working in FIA mode, the optimum conditions found were: 0.7 ml min(-1) flow rate, 300 mul sample injection and pH 6.5. The sensor responds to glucose concentrations ranging from 400 to 2000 mg l(-1), the reproducibility is around 3% and the life-time is at least 3 months (more than 350 measurements). The sensor was applied to direct glucose determination in drinks with good accuracy; interference caused by the filter effect was avoided by the kinetics of the reaction.     

Synthetic Strategies To Obtain V-P-O Open Frameworks Containing Organic Species as Structural Directing Agents. Crystal Structure of the V(IV)-Fe(III) Bimetallic Phosphate [H(3)N(CH(2))(2)NH(3)](2)[H(3)N(CH(2))(2)NH(2)][Fe(III)(H(2)O)(2)(V(IV)O)(8)(OH)(4)(HPO(4))(4)(PO(4))(4)].4H(2)O

A general synthetic approach to rationalize the solution preparative chemistry of oxovanadium phosphates containing organic species as structural directing agents is presented. Careful attention is payed to the hydrolysis and condensation processes involving the ionic species in solution, and a simple restatement of the partial charge model (PCM) has been used in order to organize the experimental results. The structure of a new V(IV)-Fe(III) bimetallic oxovanadium phosphate, [H(3)N(CH(2))(2)NH(3)](2)[H(3)N(CH(2))(2)NH(2)] [Fe(III)(H(2)O)(2)(V(IV)O)(8)(OH)(4)(HPO(4))(4)(PO(4))(4)].4H(2)O, has been determined by X-ray single crystal diffraction methods. This compound crystallizes in the monoclinic system, space group P2(1)/n and the cell dimensions are as follows: a = 14.383(3) ?, b = 10.150(2) ?, c = 18.355(4) ?, and beta = 90.39(3) degrees (Z = 2). The existence of a complex intercrossing channel system, including a very large channel of 18.4 ? of diameter (in which both water molecules and ethylenediamine species are located), is the more interesting feature of this structure. Thermal decomposition, including the dehydration/rehydration process, has been studied by thermal analysis and variable temperature X-ray powder diffraction techniques. A complementary SEM study of the different intermediate decomposition products is presented.