Ratios between content of fatty acids as markers for mixture of cow and goat milk

The fat of mixture of goat and cow milk, extracted by di-ethylic ether, was gas chromatographically analysed in order to propose an analytical procedure suitable to reveal small additions of cow milk to goat milk. The obtained results show evident differences in the percentages of some fatty acids. An attempt to apply the peak area ratios, corresponding to the methyl esters of fatty acids, suggested by the literature for cow milk did not yield good results. Other ratios suitable to reveal even the presence of low percentages (up to 5 %) of cow milk in goat milk were found and proposed in this paper. Such ratios are sensitive and can be defined markers towards cow or goat milk and also towards extraneous fat like lard or colza seeds oil.     

Face Selectivity of the Diels-Alder Additions of 2-Substituted 5,6-bis((E)-chloromethylidene)bicyclo[2.2.2]octanes

The preparation of 5,6-bis((E)-chlorommethylidene)bicyclo[2.2.2]oct-2-ene ( 13 ), 2,3-bis((E)-chloromethyl idene)-5exo,6exo- and -5endo,6endo-epoxybicyclo[2.2.2] octane ( 14 and 15 ), 5,6-bis((E)-chloromethylidene)-2exo- and -2endo-bicyclo[2.2.2] octanol ( 16 and 17 ) and 5,6-bis((E)-chloromethylidene)-2-bicyclo[2.2.2]octanone ( 18 ) are described. The face selectivity (endo-face vs. exo-face attack onto the exo-cyclic diene) of their cycloadditions to tetracyanoethylene has been determined in benzene at 20°. It is 78/22, 80/20, 60/40, 68/32, 3/97 and 30/70 for 13 , 14 , 15 , 16 , 17 and 18 , respectively.     

Can simple enones be useful partners for the catalytic stereoselective alkylation of indoles?

A new catalytic system for the first example of enantioselective Friedel-Crafts-type (FC) addition of indoles to simple enones is described. The use of an equimolar amount of chiral [Al(salen)Cl] and 2,6-lutidine (10 mol %) was found to be effective in promoting the conjugate addition of indoles to (E)-arylcrotyl ketones, furnishing the corresponding beta-indolyl ketones in excellent yield and high enantioselectivity (ee up to 89%). The role of the base was investigated through spectroscopic as well as computational analyses, which suggested that in situ formation of a new chiral (base.[Al(salen)]) complex was operating under our reaction conditions. In particular, a stable cationic [Al(salen)] hexacoordinate trans complex with the additive base and the enone is suggested as being responsible for the stereocontrolled reaction. Finally, detailed monitoring of the reaction course was carried out showing that a conventional FC pathway induced by [Al(salen)Cl] acting as a Lewis acid is operating.     

Lacidipine,a potential peroxynitrite scavenger: investigation of activity by liquid chromatography and mass spectrometry

Inflamed tissues are often characterised by the production of *NO and O(2)(-) radicals, which are known to react at an extremely fast rate to produce peroxynitrite (ONOO(-)). This highly oxidising entity reacts with protein-bound tyrosine to give 3-nitrotyrosine, which is considered a biochemical marker of peroxynitrite-induced damage. Lacidipine is a calcium antagonist indicated for the treatment of mild to moderate hypertension. In the present work, electrospray mass spectrometry with and without liquid chromatography was used to evaluate the capability of lacidipine and two other related molecules as ONOO(-) scavengers. This capability is compared with that associated with a number of commercial polyphenols described in the literature as efficient scavengers of this cytotoxic agent. The use of mass spectrometry provided rapid quantitative assessment of both the nitration and its reduction, and showed that lacidipine possesses a reasonable capability for reducing in vitro nitration of superoxide dismutase.     

Axially Dissymmetric Diphosphines in the Biphenyl Series: Synthesis of (6,6′-Dimethoxybiphenyl-2,2′-diyl)bis(diphenylphosphine)(‘MeO-BIPHEP’) and Analogues via an ortho-Lithiation/Iodination Ullmann-Reaction Approach

The new axially dissymmetric diphosphines (R)- and (S)-(6,6′-dimethoxybiphenyl-2,2′-diyl)bis(diphenyl phosphine) ((R)- and (S)- 5a ; ‘MeO-BIPHEP’) and the analogues (R)- and (S)- 5b and 5c have been synthesized in enantiomerically pure form. These ligands have become readily available by a synthetic scheme which employs, as key steps, an ortho-lithiation/iodination reaction of the (m-methoxyphenyl)diprienylphosphine oxides 8 and a subsequent Ullmann reaction of the resulting iodides 9 to provide the racemic bis(phosphine oxides) 10 . The bis(phosphine oxides) 10 subsequently are resolved with (?)-(2R,3R)- and (+)-(2S,3S)-O-2,3-dibenzoyltartaric acid and reduced to diphosphines 5 . The Ullmann reaction constitutes a new and efficient route to 2,2′-bis(phosphinoyl)-substituted biphenyl systems. Absolute configurations were established for (R)- 5a by X-ray analysis of the derived Pd complex (R,R)- 17a , and for 5b and 5c by means of ¹H-NMR comparisons of the derived Pd complexes 16 or 17 , respectively, and by means of CD comparisons. The MeO-BIPHEP diphosphine 5a proved to be as efficient as the previously described BIPHEMP diphosphine ((6,6′-dimethylbiphenyl-2,2′-diyl)bis(diphenylphosphine)) in enantioselective isomerizations and hydrogenations.     

Tetramethylcyclopentadienylselenium derivatives

Bis(1,2,3,4-tetramethylcyclopentadienyl)selane (1) has been prepared by the reaction of tetramethylcyclopentadienyllithium (Cp(t)Li) with selenium bis(diethyldithiocarbamate). Treatment of Cp(t)Li with elemental selenium, followed by air oxidation, led to loss of the allylic hydrogen atom, and formation of the novel tricyclic compound 1,4,5,6,7,10,11,12-octamethyltricyclo[7.3.0.0]-2,8-diselenadodeca-3,5,9,11-tetraene (2). The sulfur analogue of 2 has been obtained by a similar procedure. The X-ray crystal structures of compounds 1 and 2 have been determined, and the molecular geometry observed for has been probed using DFT calculations.     

A simple approach for improving the hybrid MMVB force field: application to the photoisomerization of s-cis butadiene

MMVB is a QM/MM hybrid method, consisting of a molecular mechanics force field coupled to a valence bond Heisenberg Hamiltonian parametrized from ab initio CASSCF calculations on several prototype molecules. The Heisenberg Hamiltonian matrix elements Q(ij) and K(ij), whose expressions are partitioned here into a primary contribution and second-order correction terms, are calculated analytically in MMVB. When the original MMVB force field fails to produce potential energy surfaces accurate enough for dynamics calculations, we show that significant improvements can be made by refitting the second-order correction terms for the particular molecule(s) being studied. This "local" reparametrization is based on values of K(ij) extracted (using effective Hamiltonian techniques) from CASSCF calculations on the same molecule(s). The method is demonstrated for the photoisomerization of s-cis butadiene, and we explain how the correction terms that enabled a successful MMVB dynamics study [Garavelli, M.; Bernardi, F.; Olivucci, M.; Bearpark, M. J.; Klein, S.; Robb, M. A. J Phys Chem A 2001, 105, 11496] were refitted.     

Evaluation of soybean seed protein extraction focusing on metalloprotein analysis

Two methods of protein extraction for soybean seeds were evaluated in terms of preservation of the metal ions bound to proteins after the extraction and separation procedures. The proteins were firstly separated according to their molar masses by polyacrylamide gel electrophoresis. Then, the protein bands were mapped by synchrotron radiation X-ray fluorescence in order to establish which metal ions were present in each one. Finally, some mapped protein bands were decomposed by microwave-assisted combustion and Ca, Cu, K, Mg, Mn, and Zn were quantified by inductively coupled plasma mass spectrometry or inductively coupled plasma optical emission spectrometry. The extraction methods studied were Method A (based on the treatment of ground soybean seeds with hexane and their extraction with Tris–HCl and β-mercaptoethanol) and Method B (based on the treatment of ground soybean seeds with petroleum ether and their extraction with Tris–HCl, dithiothreitol, phenylmethanesulfonyl fluoride, sodium dodecyl sulfate and potassium chloride). The best method was Method B, in which a 78% higher extraction efficiency was obtained when compared to Method A. Additionally, the metal-protein interactions were more appropriately preserved when Method B was applied, where the most affected ions were those that are bound weakly to proteins, such as Ca, K, and Mg.