Characterisation of different clones of Picea abies (L.) Karst using head-space sampling of cortical tissues combined with enantioselective capillary gas chromatography for the separation of chiral and non-chiral monoterpenes

Head-space sampling (HS) has been combined with enantioselective gas chromatography (GC) for the analysis of chiral and non-chiral monoterpenes present in the cortical tissues of five different Norway spruce clones. (1S)-(-)-alpha-Pinene, (1S,5S)-(-)sabinene, (1S)-(-)-beta-pinene, and (4S)-(-)limonene dominated over (1R)-(+)-alpha-pinene, (1R,5R)-(+)-sabinene, (1R)-(+)-beta-pinene, and (4R)-(+)-limonene. Results showed a large variation in the enantiomeric composition of cortical tissues between different clones. The development of HS-GC greatly increased the speed of precise analyses of chiral monoterpenes in small samples and therefore offer excellent opportunities in studies on the ecophysiological and chemotaxomic roles of these chiral components.     

Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

三核钨钼簇合物对苯乙烯氧化反应的催化

关于烯烃的催化氧化,报道较多。Takao等研究了苯乙烯在Ir和Rh络合物存在下的氧化反应;Collman曾报道环己烯在Vaska络合物[IrX(CO)(PPh_3)_2]催化下氧化成环己酮和环已烯氧化物。本文采用Cotton合成的簇合物[W_3O_2(CH_3CO_2)_6(H_2O)_3]Br_2·     

Steric and kinetic effects of changing solvent and reactant in grignard reactions: Conformationally mobile versus rigid δ-keto esters

trans-7α-carbomethoxy-decal-1-one (2) yields a mixture of the two oxy-esters 6 and 7 on reacting with MeMgX. Ratios $\text{6}\text{7}$ were measured for reactions performed in benzene (with X = I) and in THF (with X = Cl). The small variations of the ratios $\text{6}\text{7}$ as compared to those obtained in analogous experiments performed with methyl (2-oxo-cyclohexyl)-propionate 4 and methyl 4-methyl-5-oxo-hexanoate 5 suggest that conformational mobility plays a fundamental role in determining the variations of stereospecificity with varying the reaction conditions. Competitive Grignard reactions among 2,4 and 5 show that their reactivities are in the order 4>2>5 ($\text{K}{}_4\text{k}{}_2$ = 1.7; $\text{k}{}_5\text{k}{}_2$=0.8) when reactions are performed in benzene with X  I and 2>4>5 ($\text{k}{}_4\text{k}{}_2$= 0.56; $\text{k}{}_5\text{k}{}_2$=0.25) when reactions are performed in THF with X  C1. The experimental data are interpreted in terms of anchimeric assistance given by the ester group to the reactions of the keto group in conformationally mobile δ-keto esters. The occurrence of this effect depends on the reaction conditions which can favour, or not, folded transition states.     

Substituent-controlled photoisomerization in retinal chromophore models: Fluorinated and methoxy-substituted protonated Schiff bases

The effect of substitution on the intrinsic (i.e. in vacuo) photoisomerization ability of retinal chromophore models has been explored using CASPT2//CASSCF minimum energy path computations to map the S₁ photoisomerization paths of two substituted minimal models of the retinal chromophore: the 2-cis-penta-2,4-dieniminium and the all-trans-epta-2,4,6-trieniminium cations, which have been modified using fluorine or methoxyl substituents as representative examples of electron-withdrawing and electron-releasing groups, respectively. A systematic analysis has been performed involving substitutions in all the possible positions along the chain. It is shown that the photochemical reactivity and photoisomerization efficiency of these systems may be tuned or indeed changed, although this effect strongly depends on the position of the substituent. In particular, we have shown that (i) most of the systems preserves qualitatively the reactivity of the parent (i.e. unsubstituted) compound; (ii) substitution at positions C4 or C6 leads to a different relaxed excited state structure of the chromophore and in general to a very flat photoisomerization path (or to a tiny S₁ energy barrier in some cases); (iii) the nature of the TICT state (i.e. the S₁ → S₀ decay funnel) may be turned from a conical intersection into an excited state minimum; (iv) for the C4 methoxy-substituted system the isomerization path as well as the S₁/S₀ decay funnel involve an unusual torsional angle. Thus, substitution turns out to be a good tool not only to tune the optical properties (i.e. the absorption and emission features) of the chromophore (as we have already shown in a previous work: I. Conti, F. Bernardi, G. Orlandi, M. Garavelli, Mol. Phys. 104 (2006) 915–924), but it may also play a crucial role in tuning and controlling photoisomerization selectivity and efficiency, affecting excited state lifetime and reaction rate. A rationale for these effects is presented, which provides a basis for understanding reactivity properties and the intrinsic photochemical behavior of substituted retinal chromophores.     

Die Millon'sche Reaktion des Harns und ihre Beeinflussung durch Zufuhr von Tyrosin

Zusammenfassung Es werden einige Versuche an Kaninchen und Menschen über die Millon'sche Reaktion des Harns mitgeteilt. Ihre Intensität steigt an, wenn Tyrosin zugeführt wird, und zwar erheblich mehr nach dl-Tyrosin als nach l-Tyrosin. Ein Teil der Millon-Substanzen ist in Äther löslich, der ebenfalls nach der razemisierten stärker zunimmt als der nach der natürlichen Aminosäure.     

Thermal and photoluminescence properties of hydrated YPO4:Eu nanowires

In this work, we used the solution precipitation route to synthesize Eu³⁺-doped YPO₄·nH₂O nanowires. The structure, morphology, composition, thermal behavior, and photoluminescence of as-synthesized product were characterized by X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG/DTA), energy-dispersive X-ray spectroscopy (EDS), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopic (FE-SEM) and photoluminescence (PL) spectra. The dependence of the structure, morphology, composition and luminescent properties on the thermal treatment was investigated. The results indicate that the aqueous synthesis has a better control on the structure, morphology, composition of the products, and that the heat treatment induces the transitions of the structure, composition, and luminescent properties.     

Reverse micellar aggregates: effect on ketone reduction. 2. Surfactant role

Kinetics of the reduction of 3-chloroacetophenone (CAF) with sodium borohydride (NaBH(4)) were followed by UV-vis spectroscopy at 27.0 degrees C in different reverse micellar media, toluene/BHDC/water and toluene/AOT/water, and compared with results in an isooctane/AOT/water reverse micellar system. AOT is sodium 1,4-bis-2-ethylhexylsulfosuccinate, and BHDC is benzyl-n-hexadecyl dimethylammonium chloride. The kinetic profiles were investigated as a function of variables such as surfactant and NaBH(4) concentration and the amount of water dispersed in the reverse micelles, W(0) = [H(2)O]/[surfactant]. In all cases, the first-order rate constant, k(obs), increases with the concentration of surfactant as a consequence of incorporating the substrate into the interface of the reverse micelles where the reaction takes place. The reaction is faster at the cationic interface than at the anionic one probably because the negative ion BH(4)(-) is part of the cationic interface. The effect of the external solvent on the reaction shows that reduction is favored in the isooctane/AOT/water reverse micellar system than that with an aromatic solvent. This is probably due to BH(4)(-) being more in the water pool of the toluene/AOT/water reverse micellar system. The kinetic profile upon water addition depends largely on the type of interface. In the BHDC system, k(obs) increases with W(0) in the whole range studied while in AOT the kinetic profile has a maximum at W(0) approximately 5, probably reflecting the fact that BH(4)(-) is part of the cationic interface while, in the anionic one, there is a strong interaction between water and the polar headgroup of AOT below W(0) = 5 and, above that, BH(4)(-) is repelled from the interface once the water pool has formed. Application of a kinetic model based on the pseudophase formalism, which considers the distribution of the ketone between the continuous medium and the interface and assumes that reaction takes place only at the interface, has enabled us to estimate rate constants at the interface of the reverse micellar systems. At W(0) < 10, it was considered that NaBH(4) is wholly at the interface and, at W(0) >/= 10, where there are free water molecules, also the partitioning between the interface and the water pool was taken into account. The results were used to evaluate CAF and NaBH(4) distribution constants between the different pseudophases as well as the second-order reaction rate constant of the reduction reaction in the micellar interface.     

Progress,highlights and perspectives on NiO in perovskite photovoltaics

The power conversion efficiency (PCE) of NiO based perovskite solar cells has recently hit a record 22.1% with a hybrid organic–inorganic perovskite composition and a PCE above 15% in a fully inorganic configuration was achieved. Moreover, NiO processing is a mature technology, with different industrially attractive processes demonstrated in the last few years. These considerations, along with the excellent stabilities reported, clearly point towards NiO as the most efficient inorganic hole selective layer for lead halide perovskite photovoltaics, which is the topic of this review. NiO optoelectronics is discussed by analysing the different doping mechanisms, with a focus on the case of alkaline and transition metal cation dopants. Doping allows tuning the conductivity and the energy levels of NiO, improving the overall performance and adapting the material to a variety of perovskite compositions. Furthermore, we summarise the main investigations on the NiO/perovskite interface stability. In fact, the surface of NiO is commonly oxidised and reactive with perovskite, also under the effect of light, thermal and electrical stress. Interface engineering strategies should be considered aiming at long term stability and the highest efficiency. Finally, we present the main achievements in flexible, fully printed and lead-free perovskite photovoltaics which employ NiO as a layer and provide our perspective to accelerate the improvement of these technologies. Overall, we show that adequately doped and passivated NiO might be an ideal hole selective layer in every possible application of perovskite solar cells.

The power conversion efficiency of NiO based perovskite solar cells has recently hit a record 22.1%. Here, the main advances are reviewed and the role of NiO in the next breakthroughs is discussed.     

A new multi analytical approach for the identification of synthetic and natural dyes mixtures. The case of orcein-mauveine mixture in a historical dress of a Sicilian noblewoman of nineteenth century

Abstract

In this paper, the application of a multi-analytical approach for the characterisation of synthetic and natural dyes in a historical textile is presented. The work is focused on a historical dress of a Sicilian noblewoman, dating from about 1865–1870. Firstly, SERS on fibre was performed, in order to individuate the classes of dyes employed. The SERS spectra suggested the presence of two main dyes: mauveine and orcein. In order to confirm these preliminary results, two different extraction protocols were applied. The extracts obtained were analysed by ESI-MS, MALDI-ToF and UHPCL-MS analyses, confirming the SERS results. In particular, the application of the ammonia mild extraction technique allowed to selectively extract the phenoxazonic dyes, separating them already in the extraction step from the synthetic ones. Thanks to this multi-analytical approach, this dress could be considered as one of the first examples of employment of synthetic dyes in association with natural ones.