[99mTc]Tc-PSMA-T4—Novel SPECT Tracer for Metastatic PCa: From Bench to Clinic

Despite significant advances in nuclear medicine for diagnosing and treating prostate cancer (PCa), research into new ligands with increasingly better biological properties is still ongoing. Prostate-specific membrane antigen (PSMA) ligands show great potential as radioisotope carriers for the diagnosis and therapy of patients with metastatic PCa. PSMA is expressed in most types of prostate cancer, and its expression is increased in poorly differentiated, metastatic, and hormone-refractory cancers; therefore, it may be a valuable target for the development of radiopharmaceuticals and radioligands, such as urea PSMA inhibitors, for the precise diagnosis, staging, and treatment of prostate cancer. Four developed PSMA-HYNIC inhibitors for technetium-99m labeling and subsequent diagnosis were subjected to preclinical in vitro and in vivo studies to evaluate and compare their diagnostic properties. Among the studied compounds, the PSMA-T4 (Glu-CO-Lys-L-Trp-4-Amc-HYNIC) inhibitor showed the best biological properties for the diagnosis of PCa metastases. [^99mTc]Tc-PSMA-T4 also showed effectiveness in single-photon emission computed tomography (SPECT) studies in humans, and soon, its usefulness will be extensively evaluated in phase 2/3 clinical trials.     

Determination of Mifepristone (RU-486) and Its Metabolites in Maternal Blood Sample after Pharmacological Abortion

The aim of the study was the development and validation of the UHPLC-QqQ-MS/MS method for the determination of mifepristone in human blood as well as the identification and quantification of its metabolites after self-induced pharmacological abortion. The metabolic pathway in humans was proposed after examination of an authentic casework. The fast and simple preanalytical procedure was successfully applied (pH9, tert-butyl-methyl ether). The validation parameters of the method were as follows: limit of quantification: 0.5 ng/mL; coefficients of determination: >0.999 (R²), intra- and inter-day accuracy and precision values did not exceed ± 13.2%. The recovery and matrix effect were in the range of 96.3–114.7% and from −3.0 to 14.7%, respectively. Toxicological analysis of the mother’s blood (collected the day after the pregnancy termination) revealed the presence of five compounds: mifepristone (557.4 ng/mL), N-desmethyl-mifepristone (638.7 ng/mL), 22-OH-mifepristone (176.9 ng/mL), N,N-didesmethyl-mifepristone (144.5 ng/mL) and N-desmethyl-hydroxy-mifepristone (qualitatively). To our knowledge, the study presented in this paper is the first report on the concentrations of mifepristone and its metabolites in maternal blood samples after performing a self-induced abortion. The established UHPLC-QqQ-MS/MS method is suitable for forensic toxicological analysis as well as in terms of clinical toxicology in future investigations (examination of pharmacokinetics, bioavailability and metabolism of RU-486).     

Influence of Nanocellulose Structure on Paper Reinforcement

This article describes how crystalline or fibrous nanocellulose influences the mechanical properties of paper substrate. In this context, we used commercially available cellulose nanocrystals, mechanically prepared cellulose nanofibers dispersed in water or ethanol, and carboxy cellulose nanofibers. Selective reinforcement of the paper treated with the nanocellulose samples mentioned above was observed. The change in the fibre structure was assessed using scanning electron microscopy, roentgenography, and spectroscopy techniques. In addition, the effect of nanocellulose coating on physical properties was evaluated, specifically tensile index, elongation coefficient, Elmendorf tear resistance, Bendtsen surface roughness, Bendtsen air permeability, and bending strength. It can be concluded that the observed decrease in the strength properties of the paper after applying some NC compositions is due to the loss of potential disturbances in hydrogen bonds between the nanocellulose dispersed in ethanol and the paper substrate. On the other hand, significantly increased strength was observed in the case of paper reinforced with nanocellulose functionalized with carboxyl groups.     

Tripodal,Squaramide-Based Ion Pair Receptor for Effective Extraction of Sulfate Salt

Combining three features—the high affinity of squaramides toward anions, cooperation in ion pair binding and preorganization of the binding domains in the tripodal platform—led to the effective receptor 2. The lack of at least one of these key elements in the structures of reference receptors 3 and 4 caused a lower affinity towards ion pairs. Receptor 2 was found to form an intramolecular network in wet chloroform, which changed into inorganic–organic associates after contact with ions and allowed salts to be extracted from an aqueous to an organic phase. The disparity in the binding mode of 2 with sulfates and with other monovalent anions led to the selective extraction of extremely hydrated sulfate anions in the presence of more lipophilic salts, thus overcoming the Hofmeister series.     

The Influence of Carbon Nature on the Catalytic Performance of Ru/C in Levulinic Acid Hydrogenation with Internal Hydrogen Source

The influence of the nature of carbon materials used as a support for Ru/C catalysts on levulinic acid hydrogenation with formic acid as a hydrogen source toward gamma-valerolactone was investigated. It has been shown that the physicochemical properties of carbon strongly affect the catalytic activity of Ru catalysts. The relationship between the hydrogen mobility, strength of hydrogen adsorption, and catalytic performance was established. The catalyst possessing the highest number of defects, stimulating metal support interaction, exhibited the highest activity. The effect of the catalyst grain size was also studied. It was shown that the decrease in the grain size resulted in the formation of smaller Ru crystallites on the catalyst surface, which facilitates the activity.     

Use of hop cone extract obtained under supercritical CO2 conditions for producing antibacterial all-purpose cleaners

This paper attempts to demonstrate empirically the possibility of using a hydrophobic extract of hop cone obtained under the conditions of supercritical carbon dioxide to produce all-purpose cleaner with antimicrobial activity and low irritant potential. A series of prototypes of products varied by the extract concentration was developed. The formulations were assessed for physicochemical properties: particle size, turbidity, and color. The results indicate that the hydrophobic extracts of hop cone can be a valuable component of chemical products intended for washing, having a broad spectrum of action and contributing to improvement of the product’s safety.     

Preparation of Titanium Oxide-Based Nanoparticles Modified with D-(+)-Mannose and Investigation of their Properties As A Potential Drug Carrier

Titanium oxide nanoparticles modified with D-(+)-mannose were obtained. In the process of their formation, they were conjugated with an active substance (tadalafil). The physicochemical properties of the obtained products were assessed, and the size and electrokinetic potential were determined using a dynamic light scattering technique. X-ray diffractometry was applied in order to define the crystalline properties, and Fourier-transform infrared spectroscopy was used to confirm the formation of the desired products. It was possible to obtain TiO₂ coated with D-(+)-mannose. The average size of nanoparticles was between 230 and 268 nm. The release of the active substance from the product over a time period of three hours was assessed against the reference material, which was not modified by D-(+)-mannose. The results indicate that covering titanium oxide nanoparticles with the modifying substance favours a slower rate of release for the active substance, which is the desired effect from a pharmacological point of view. The releasing of active substance from modified products was even 68% slower than that from the reference product. These modified titanium oxides are promising materials that may have found an application as drug carriers.

Graphic Abstract

     

Tuning the Magnetic Properties of Columnar Benzo[e][1,2,4]triazin-4-yls with the Molecular Shape

A homologous series of disc-like 1,3,6-trisubstituted benzo[e][1,2,4]triazin-4-yls 1[n] was synthesized and their structural, thermal, optical, magnetic, and electric properties were investigated. The results demonstrate that all members of the series display a Col_h phase with clearing temperatures depending on the length of the alkoxy chains at the N(1) position, hence the shape of the disc. Powder XRD and magnetic data indicate a gradual change in the column diameter and magnetic behavior in the series in transition from half-disc in 1[0] (antiferromagnetic interactions) to full-disc geometry in the 1[12] homologue (ferromagnetic interactions with J/k_B=+7.5 K). Studies of binary systems revealed that a 1 : 1 mixture of 1[0] and 1[12] exhibits modest stabilization of the Col_h phase with an expanded range, and magnetic behavior typical for 1[0] in the rigid phase obtained from the melt. Electric measurements demonstrated hole mobility of ∼10⁻³ cm² V⁻¹ s⁻¹ and dark conductivity of ∼10⁻¹¹ Scm⁻¹ in the mixture and individual compounds. The latter is enhanced up to 4 times by simultaneous illumination with UV light.     

Structurally diverse coordination compounds of zinc as effective precursors of zinc oxide nanoparticles with various morphologies

The structurally diverse coordination compounds of zinc were designed and synthesized using two types of building blocks: short‐chain carboxylate ions and hexamethylenetetraamine. They were characterized by X‐ray crystallography, infrared spectroscopy and thermal analysis. The studied compounds were used as precursors for production (via controlled thermal conversion) of zinc oxide nanoparticles. The conversion process was optimized in terms of two parameters (heating rate and maximum temperature). Such an approach, combined with proper design of the precursor structure, allows fabrication of various zinc oxide micro‐ and nanoparticles. The influence of a precursor structure and modifications of conversion parameters on size and morphology of ZnO particles were studied and discussed.