The fate of the hydroxyalkoxy radical in the OH‐initiated oxidation of isoprene

Rate constants for several intermediate steps in the OH‐initiated oxidation of isoprene were determined using laser‐photolysis/laser‐induced fluorescence of OH radicals at total pressures between 3 and 4 Torr at 295 K. The rate constant for decomposition of the hydroxyalkoxy radical was determined to be (3.0 ± 0.5) × 10⁴ s^?1 in this pressure range, which is in fair agreement with previous work. The presence of a prompt alkoxy decomposition pathway was also investigated and found to contribute less than 10% to the total hydroxyalkoxy radical decomposition. The rate constant for the reaction of the hydroxyperoxy radical with NO was determined to be (2.5 ± 0.5) × 10^?11 cm³ molecule^?1 s^?1, which is moderately higher than previously reported. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 255–261, 2002     

Quantitative analysis of oxytetracycline and its 4-epimer in calf tissues by high-performance liquid chromatography combined with positive electrospray ionization mass spectrometry

Tetracycline antibiotics are commonly used in veterinary medicine because of their broad spectrum activity and cost effectiveness. Oxytetracycline (OTC) is one of the most important members of this antibiotic family. The purpose of this study was to develop and validate a method to determine OTC residues in edible tissues of calf. Extraction of OTC and its 4-epimer (4-epiOTC), in the presence of the internal standard demethylchlortetracycline (DMCTC), was performed using a liquid extraction with sodium succinate solution (pH 4.0), followed by protein removal with trichloroacetic acid and paper filtration. Further solid-phase extraction clean-up on an HLB polymeric reversed phase column was performed to obtain an extract suitable for LC-MS-MS analysis. Chromatographic separation of the internal standard, and especially OTC and its 4-epimer, was achieved on a PLRP-S polymeric reversed phase column, using a mixture of 0.001 M of oxalic acid, 0.5% (v/v) of formic acid and 3% (v/v) of tetrahydrofuran in water (mobile phase A) and tetrahydrofuran (mobile phase B) as the mobile phase, and at a column temperature of 60 degrees C. OTC and its 4-epimer could be identified using the MS-MS detection technique, and were subsequently quantified. The method has been validated according to the requirements of the EC at the MRL (maximum residue limit, 100 ng g(-1) for muscle, 300 ng g(-1) for liver and600 ng g(-1) for kidney), half the MRL and double the MRL levels, as well for OTC as for 4-epiOTC. Calibration graphs were prepared for all tissues and good linearity was achieved over the concentration ranges tested (r > 0.99 and goodness of fit < 10%). Limits of quantification of half the MRLs were obtained for the analysis of OTC and 4-epiOTC in muscle, liver and kidney tissues of calf. Limits of detection ranged for both components between 0.8 and 48.2 ng g(-1). The within-day and between-day precisions, expressed as RSD values, were all below the maximum allowed RSD values calculated according to the Horwitz equation. The results for accuracy fell within the -20% to +10% range. Recoveries were between 47 and 56% for OTC, and between 52 and 62% for 4-epiOTC, depending on the tissue. The method has been successfully used for the quantitative determination of OTC and 4-epiOTC in tissue samples of calves medicated with OTC by intramuscular injection.     

Latent low-coordinate titanium imides supported by a sterically encumbering beta-diketiminate ligand

Addition of an equal molar quantity of R- (R = Me, SiMe3) to complex (Nacnac)Ti=NAr(OTf) (Nacnac- =[ArNC(tBu)]2CH, Ar = 2,6-iPr2C6H3) forms the imido alkyl (Nacnac)Ti=NAr(R), which can be readily protonated to afford [(Nacnac)Ti=NAr(L)]+ (L = THF, Et2O, eta1-C6H5NMe2), or treated with B(C6F5)3 to afford the zwitterion (Nacnac)Ti=NAr(micro-CH3)B(C6F5)3.     

An evaluation of atmospheric pressure ionization techniques for the analysis of N-Methyl carbamate pesticides by liquid chromatography mass spectrometry

Atmospheric pressure ionization (API) techniques are evaluated for the mass spectral analysis of N-methyl carbamate pesticides. Atmospheric pressure chemical ionization (APCI) using a heated nebulizer interface provided both protonated molecules and abundant, characteristic fragment ions. With ion spray (ISP; pneumatically assisted electrospray ionization), which utilizes a milder “ion evaporation” process, primarily protonated molecules were obtained, although fragment ions similar to those observed in APCI could be induced by variation of the API orifice voltage. Product ion spectra of ISP-derived protonated molecules, generated by tandem mass spectrometry using collision-induced dissociation, are also presented. The APCI and ISP spectra of the carbamates are compared to those obtained with a thermospray interface and also to their electron ionization and methane CI spectra obtained with a particle beam interface. For all four interfaces, combined liquid chromatography mass spectrometry methods using conventional (4.6 mm i.d.) columns are described for the separation and detection of pesticide mixtures. These methods are applied to the confirmatory analysis of three representative carbamate pesticides, spiked at the 0.1-ppm level in green peppers. For those carbamates amenable to gas chromatography mass spectrometry, comparative results are presented.     

Intermolecular C-H bond activation promoted by a titanium alkylidyne

The transient titanium alkylidyne complex (PNP)TiCtBu (PNP = N-[2-P(CHMe2)2-4-methylphenyl]2-), prepared from alpha-hydrogen abstraction of the corresponding alkylidene-alkyl species (PNP)Ti=CHtBu(CH2tBu), can readily undergo intermolecular 1,2-addition of C-H bonds of benzene and SiMe4. Synthesis and reactivity, isotopic labeling, kinetics, and theoretical studies strongly favor an alkylidyne pathway and the alpha-H abstraction step to be the rate-determining step.     

Sulfur K-edge XAS and DFT calculations on [Fe4S4]2+ clusters: effects of H-bonding and structural distortion on covalency and spin topology

Sulfur K-edge X-ray absorption spectroscopy of a hydrogen-bonded elongated [Fe4S4]2+ cube is reported. The data show that this synthetic cube is less covalent than a normal compressed cube with no hydrogen bonding. DFT calculations reveal that the observed difference in electronic structure has significant contributions from both the cluster distortion and from hydrogen bonding. The elongated and compressed Fe4S4 structures are found to have different spin topologies (i.e., orientation of the delocalized Fe2S2 subclusters which are antiferromagnetically coupled to each other). It is suggested that the H-bonding interaction with the counterion does not contribute to the cluster elongation. A magneto-structural correlation is developed for the Fe4S4 cube that is used to identify the redox-active Fe2S2 subclusters in active sites of HiPIP and ferredoxin proteins involving these clusters.     

En route to coordination chemistry under confined conditions in a porous capsule: Pr3+ with different coordination shells

The highly charged nanocontainer capsule of the type [pentagon]12[linker]30 identical with [(Mo)Mo5O21(H2O)6]12[Mo2O4(SO4)]30 with 20 nanosized pores and channels allows the entrance of cations like Pr3+: the latter are positioned at two different sites and have two different coordination shells, corresponding to a coordination chemistry under confined conditions; a fascinating aspect is that capsule encapsulated water shells fixed by hydrogen bonds act formally as polydentate ligands.     

Functional polymers. II. Preparation and polymerization of methyl 5-vinylsalicylate,methyl 5-vinylacetylsalicylate, 5-vinylsalicylic acid,and 5-vinylacetylsalicylic acid

Four new derivatives of 5-vinylsalicylic acid were prepared and their homopolymerization and copolymerization with acrylic acid and methacrylic acid investigated. Methyl 5-vinylsalicylate was prepared in a six-step synthesis from methyl salicylate in an overall yield of 35%. Acetylation in the last step yielded methyl 5-vinylacetylsalicylate. Hydrolysis of methyl 5-vinylsalicylate gave 5-vinylsalicylic acid which was acetylated to 5-vinylacetylsalicylic acid (5-vinyl aspirin). The 5-vinyl-substituted salicylic acid derivatives could be readily homopolymerized and copolymerized with acrylic acid and methacrylic acid to give various compositions of copolymers. It is worth noting that even the monomers with free phenol groups could be readily polymerized with azobisisobutyronitrile as radical initiator to high molecular weight polymers without interference of the phenolic OH group.     

Metal "capture" by a heterotrimetalloligand, heterometallic d(10)-d(10) interactions, and unexpected iron-to-platinum silyl ligand migration: a combined experimental and theoretical study

The heterotrinuclear chain complex Hg[Fe{Si(OMe)(3)}(CO)(3)(dppm-P)](2) (dppm = Ph(2)PCH(2)PPh(2)) 1 which has a transoid arrangement of the phosphine donors was used as a versatile chelating metallodiphosphine ligand owing to the easy rotation of its metal core about the Fe-Hg sigma-bonds. Its reaction with the labile Pt(0) olefin complex [Pt(C(7)H(10))(3)] yielded [HgPt{Si(OMe)(3)}Fe(2)(CO)(6){Si(OMe)(3)}(mu-dppm)(2)] 5 which resulted, after coordination of the dangling phosphine donors to Pt, from an unprecedented intramolecular rearrangement involving a very rare example of silyl ligand migration between two different metal centers, and the first one in metal cluster chemistry. The major structural differences observed between the heterometallic complexes obtained from 1 and d(10) Cu(I), Pd(0), or Pt(0) precursors have been established by X-ray diffraction. The bonding situation in the silyl migrated Pt complex 5 was analyzed and compared to those in the isoelectronic, but structurally distinct complexes obtained from Cu(I) and Pd(0) precursors, [Hg{Fe[Si(OMe)(3)](CO)(3)(mu-dppm)}(2)Cu](+) (2) and [Hg{Fe[Si(OMe)(3)](CO)(3)(mu-dppm)}(2)Pd] (4), respectively, by means of extended Hückel interaction diagrams. DFT calculations then allowed the energy minima associated with the three structures to be compared for 2, 4, and 5. All three minima are in close competition for the Pd complex 4, but silyl migration is favored by approximately 10 kcal mol(-)(1) for 5, mainly due to the more electronegative character of Pt with respect to Pd.     

Micellar shape change and internal segregation induced by chemical modification of a tryptych block copolymer surfactant

We report the detailed characterization of micelles formed by two nonionic, amphiphilic ABC triblock copolymers. Poly(ethylene oxide)-b-poly(styrene)-b-1,2-poly(butadiene) (PEO-b-PS-b-PB) triblock copolymer "OSB" forms core-corona spherical micelles in aqueous solution, and the two hydrophobic blocks S and B are mixed homogeneously within the micelle core. PEO-b-PS-b-PB:C6F13I triblock copolymer "OSF" was prepared by selective fluorination of the B block in OSB with n-perfluorohexyl iodide. Fluorination of the B block induces internal segregation into an inner F core and an intermediate S shell. Furthermore, the strong incompatibility that results from fluorination drives a shape change into an oblate ellipsoid. These micellar morphologies are confirmed by combined light, neutron, and X-ray scattering measurements, as well as TEM imaging.