Rapid determination of molybdenum in ferromolybdenum and molybdenum additives, with oxine

A rapid method is presented for the gravimetric determination of molybdenum (as the oxinate) in ferromolybdenum and molybdenum additives. The sample is fused with a mixed flux of sodium peroxide and sodium carbonate in a zirconium crucible for complete decomposition. Leaching the cooled fusion cake with water provides instantaneous separation of molybdenum as sodium molybdate from iron(III) and other hydrous oxides. After filtration, the molybdenum is precipitated with oxine after addition of EDTA and oxalate to obviate interference from other metal oxinates, and determined gravimetrically. The precision and accuracy are comparable to those of referee methods.     

The type of group measure space von Neumann algebras

LetG be a countable discrete group acting by measure-preserving automorphisms of a finite measure space (M, ) and let (G,M) be the corresponding group measure space von Neumann algebra, which will be a finite von Neumann algebra. Necessary and sufficient conditions are given for (G,M) to have a non-zero type I part, and the projection on the type I part is explicitly described.This research was supported in part by National Science Foundation Grant MCS 74-19876.     

Unexpected reactivity of PdCl(2) and PtCl(2) complexes of the unsaturated diphosphine o-Me(2)TTF(PPh(2))(2) toward chloride abstraction with thallium triflate

Attempted thallium triflate abstraction of chloride anions from the MCl(2) complexes of the unsaturated chelating diphosphines o-dimethyl-bis(diphenylphosphino)tetrathiafulvalene (P2) (M = Pd, Pt) and cis-1,2-bis(diphenylphosphino)ethylene (dppen) (M = Pd) affords, surprisingly, a Tl(OTf) adduct in the case of (P2)PdCl(2) and (P2)PtCl(2), with no chloride abstraction, and a dicationic bis(palladium) bis(triflate) salt in the case of (cis-dppen)PdCl(2), in which only one Cl anion was removed. The crystal structures of these complexes were determined by X-ray analysis, which established the formulations (P2)MCl(2).Tl(OTf) (M = Pd, Pt) and [(dppen)PdCl](2)(OTf)(2), respectively. These compounds can be seen as possible intermediates in the general chloride abstraction process between (P-P)MCl(2) (M = Pd, Pt) and thallium triflate.     

Preparation of Neutral Ionophores for Alkali and Alkaline Earth Metal Cations and their application in ion selective membrane electrodes

The preparation of a series of non-cyclic, uncharged ligands able to selectively complex alkali and alkaline earth metal cations is described. These molecules are designed to be used as carriers for cations through membranes. Some of the compounds show high Ca²⁺ and Na⁺ selectivity, respectively, in liquid membrane electrodes.     

Characterization of single- and double-stranded DNA on gold surfaces

Single- and double-stranded deoxy ribonucleic acid (DNA) molecules attached to self-assembled monolayers (SAMs) on gold surfaces were characterized by a number of optical and electronic spectroscopic techniques. The DNA-modified gold surfaces were prepared through the self-assembly of 6-mercapto-1-hexanol and 5'-C(6)H(12)SH -modified single-stranded DNA (ssDNA). Upon hybridization of the surface-bound probe ssDNA with its complimentary target, formation of double-stranded DNA (dsDNA) on the gold surface is observed and in a competing process, probe ssDNA is desorbed from the gold surface. The competition between hybridization of ssDNA with its complimentary target and ssDNA probe desorption from the gold surface has been investigated in this paper using X-ray photoelectron spectroscopy, chronocoulometry, fluorescence, and polarization modulation-infrared reflection absorption spectroscopy (PM-IRRAS). The formation of dsDNA on the surface was identified by PM-IRRAS by a dsDNA IR signature at approximately 1678 cm(-)(1) that was confirmed by density functional theory calculations of the nucleotides and the nucleotides' base pairs. The presence of dsDNA through the specific DNA hybridization was additionally confirmed by atomic force microscopy through colloidal gold nanoparticle labeling of the target ssDNA. Using these methods, strand loss was observed even for DNA hybridization performed at 25 degrees C for the DNA monolayers studied here consisting of attachment to the gold surfaces by single Au-S bonds. This finding has significant consequence for the application of SAM technology in the detection of oligonucleotide hybridization on gold surfaces.     

Quantitative NMR measurements in copolymers of vinylidene chloride and acrylonitrile: The effect of saturation and varying nuclear Overhauser enhancements

Spin-lattice relaxation times and nuclear Overhauser enhancements (NOE) for ¹³C nuclei in copolymers of acrylonitrile and vinylidene chloride were measured at 20.1 and 67.9 MHz. In the ? CCl₂? region of the spectrum T₁ and NOE values of the various resonances are equal within experimental error and are invariant to changes in composition. The T₁ and NOE values of the ? CCl₂? region, however, are not equal to those of the ? CH? or ? CN region. As a result compositions cannot be calculated by direct comparison of the areas in the ? CCl₂? region and either the ? CH? or the ? CN region. Discrepancies can be corrected for the ? CH? resonances by multiplication of the area by an empirical constant. A similar constant for the ? CN region is composition-dependent at 20.1 and 67.9 MHz. A chemical shift anisotropy mechanism is postulated as important for relaxation of the ? CN resonances. The overall influence of variable T₁ and NOE values on quantitative determination of polymer composition is considered.     

Determination of phenolic compounds in water samples by on-line solid-phase extraction—supercritical-fluid chromatography with diode-array detection

Summary The eleven Environmental Protection Agency (EPA) priority phenolic compounds have been determined by solid-phase extraction (SPE) coupled on-line to supercritical-fluid chromatography (SFC) with diodearray detection. The variables affecting chromatographic separation were optimized and the analytes were separated at 40 °C in two diol columns connected in series; a gradient of methanol, as modifier, and CO₂ was used as mobile phase. Under these conditions, all the compounds studied were separated to baseline in less than 13 min. PLRP-S and LiChrolut EN were tested as sorbents in a 10×3 mm i.d. laboratory-packed precolumn for solid-phase extraction. An ion-pair reagent, tetrabutylammonium bromide (TBA), was used in the extraction process to increase break-through volumes. The performance of the method was checked with tap and river waters and the pre-concentration of 20 mL of sample in a PLRP-S pre-column enabled phenolic compounds to be determined at low μg L⁻¹ levels with limits of detection ranging between 0.4 and 2 μg L⁻¹. The repeatability and reproducibility between days (n=3) for real samples spiked at 10 μg L⁻¹ were lower than 10%.     

Parametric Integer Programming Analysis: A Contraction Approach

An algorithm is presented for solving families of integer linear programming problems in which the problems are "related" by having identical objective coefficients and constraint matrix coefficients. The righthand-side constants have the form b + θd where b and d are conformable vectors and θ varies from zero to one.The approach consists primarily of solving the most relaxed problem (θ = 1) using cutting planes and then contracting the region of feasible integer solutions in such a manner that the current optimal integer solution is eliminated.The algorithm was applied to 1800 integer linear programming problems with reasonable success. Integer programming problems which have proved to be unsolvable using cutting planes have been solved by expanding the region of feasible integer solutions (θ = 1) and then contracting to the original region.     

Electronic Structure of Rh(2)(&mgr;-CO)(CO)(2)(H(2)PCH(2)PH(2))(2). An Example of a Non-A-Frame Structure

Calculations based on density functional theory (DFT) and Hartree-Fock configuration interaction (HF-CI) methodology have been carried out to investigate the rhodium-rhodium coupling in Rh(2)(CO)(2)(dppm)(2), 1 (dppm = Ph(2)PCH(2)PPh(2)) and in Rh(2)(&mgr;-CO)(CO)(2)(dppm)(2), 2. DFT geometries, obtained with the Dgauss program, are in good agreement with those determined from X-ray, but HF geometries, calculated using the same basis sets, yield bond distances systematically too long. Calculations indicate that the rhodium atoms in 1 are linked by a single bond. The insertion of a semibridging carbonyl between the two metal atoms leads to a shortening of the rhodium-rhodium distance and also to a noticeable weakening of the metal-metal interaction. Both effects, and also the stabilization of the HOMO of 2, are related to an observed change from square planar to tetrahedral of the ligand environment of the Rh atom proximal to the inserted CO. Both MO analysis and bond characterization from the topology of the charge density confirm the existence of a bonding interaction between the semibridging carbonyl and the distal rhodium atom. The electronic structures of the dicationic complex [Rh(2)(CO)(3)(dppm)(2)](2+) and of the A-frame-like, isoelectronic system Rh(2)Br(2)(&mgr;-CO) (dppm)(2) are also discussed. The electron deformation density is derived from 2 by means of several methodological approaches, namely, HF, HF-CI, DFT, and DFT + gradient corrections. The HF deformation density obtained in the plane containing the metals and the three CO ligands is discussed, as well as the "correlation density" obtained from the difference maps DFT - HF and CI - HF.