Discontinuous-flow potentiometric determination of chloride in a large-volume wall-jet cell using an ion-selective electrode based on a silver chloride film chemically deposited on a silver iodide support

A robust and sensitive chloride ion-selective electrode can be prepared by modifying the surface of an iodide-selective electrode using the chemical reaction with mercuric chloride in an oxidizing medium containing excess chloride. A thin film of silver chloride is thus formed ensuring a rapid and reproducible response to chloride. The analytical parameters of this electrode are similar to those of commercial silver chloride ion-selective electrodes, but its electrical impedance and signal noise are substantially lower and the response somewhat faster. Its sensitivity toward surfactants is somewhat suppressed. The electrode was used for discontinuous flow potentiometric (DFP) determinations in a large-volume wall-jet cell in which the electrode surface can be continuously reactivated by a cleaning solution contained in the cell. The method was applied to determination of chloride in ground waters from an industrial waste dumping site. The limit of determination is low 9 mug Cl(-)/l (2.6 x 10(-7)M), the precision good (the relative standard deviation varies from 0.6 to 3.0% for chloride contents from 2.90 to 0.15 mg/l, respectively) and the method correlates satisfactorily with the results of an indirect AAS determination of chloride. The sample throughput is high-90 measurements can be carried out per hour, corresponding to 30-40 determinations per hour.     

Qualitative and quantitative sensitivity in flame photometry

Concepts of sensitivity in flame photometry are discussed. A distinction is made between sensitivity itself, concentration limits and dilution limits applied to qualitative and quantitative analysis by flame photometry. Sensitivity values, as well as the concentration limits, are considered from two different aspects: as a function of the slope of calibration curves-percentual values-and as a function of fluctutions-fluctuational values. The concepts are applied to the two main branches of flame photometry, emission and absorption.     

Rapid determination of PAHs in soil samples by HPLC with fluorimetric detection following sonication extraction

A rapid method for the determination of PAHs in soil samples based on their extraction with methylene chloride by sonication and subsequent separation by HPLC with fluorimetric detection is proposed. A Hypersil Green PAH column was used with a gradient of acetonitrile/water as the mobile phase, together with a program of nine excitation and emission wavelength pairs. Recoveries were in the range 70-98%, except for acenaphthene and naphthalene, at concentration levels 1.08-442 microg/kg with relative standard deviations in the range 2-15% (n = 4). Total PAHs found in soil samples were in the range 15-282 microg/kg. The results were compared with those obtained by applying the 3540 EPA method for two samples.     

Natural radioactivity of building materials

Experiments were designed to measure trace uranium concentration and the rate of radon exhalation from masonry structural materials, both bare and surface finished and coated. LR115 cellulose nitrate track detectors were used to record the alpha emission from structural material surface. Fission track, neutron activation and fluorometric analysis methods were used to determine the uranium content. Most types of paints studied will reduce alpha contribution and radon emanation from building materials.     

Solvent‐free microwave synthesis of bis‐pyrazolo[3,4‐b:4′,3′‐e]‐pyridines and study of their antifungal properties

The synthesis of a series of bis‐pyrazolo[3,4‐b:4′,3′‐e]pyridines ( 3 ) in the reaction of 5‐amino‐3‐methyl‐1‐phenylpyrazole ( 1 ) with aldehydes ( 2 ) under microwave irradiation and solvent‐free conditions is described. The structure elucidation of the products is based on detailed nmr analysis of experiments such as ¹H‐COSY, NOESY, DEPT, HSQC and HMBC. These compounds showed moderate antifungal in vitro activity against dermatophytes.     

Creatinine biosensor based on ammonium ion selective electrode and its application in flow-injection analysis

A new, highly sensitive, fast responding and stable potentiometric biosensor for creatinine determination is developed. The biosensor is based on an ammonium ion-selective electrode. Creatinine deiminase (EC 3.5.4.21) is chemically immobilized on the surface of the polymeric ion-sensitive membrane in the form of monomolecular layer using a simple, one-step carbodiimide covalent attachment method. The resulting enzyme electrodes are useful for measurement under flow injection analysis (FIA) conditions. The biosensors exhibit excellent operational and storage stability. The enzyme electrodes retain over 70% of initial sensitivity after ten weeks of work under FIA conditions. The storage stability at 4 °C is longer than half a year without loss of sensitivity. Under optimized conditions near 30 samples per hour can be analyzed and the determination range (0.02-20.0 mmol l⁻¹) fully covers creatinine concentrations important from clinical and biomedical point of view. The simple biosensor/FIA system has been successfully used for determination of creatinine in urine, serum and posthemodialysate samples.     

Molecular dynamics simulations of the mononuclear zinc-beta-lactamase from Bacillus cereus complexed with benzylpenicillin and a quantum chemical study of the reaction mechanism

Herein, we present results from MD simulations of the Michaelis complex formed between the B. cereus zinc-beta-lactamase enzyme and benzylpenicillin. The structural and dynamical effects induced by substrate-binding, the specific role of the conserved residues, and the near attack conformers of the Michaelis complex are discussed. Quantum chemical methods (HF/6-31G* and B3LYP/6-31G*) are also applied to study the hydrolysis reaction of N-methylazetidinone catalyzed by a monozinc system consisting of the side chains of the histidine residues (His86, His88, and His149) complexed with Zn-OH and the side chains of Asp90 and His210. From this model system, we built molecular-mechanics representations of the prereactive complex and transition state configurations docked into the active site. Linear-scaling semiempirical calculations coupled with a continuum solvent model were then performed on these static models. We propose that the experimental rate data for the B. cereus enzyme is compatible with a one-step mechanism for the hydrolysis of beta-lactam substrates in which His210 acts as a proton donor.     

Enzyme catalysis in organic solvents: a promising field for optical biosensing

The ability of enzymes to work in non-aqueous media offers new and almost unexploited possibilities for the development of new optical biosensors. The advantages of performing biocatalytic reactions in non-aqueous media are discussed in relation to their possible application in optical biosensor design. Attention is focused on the factors that influence enzymatic catalysis in organic solvents, including the role of enzyme-associated water, criteria for solvent selection and the alteration of enzyme specificity. Recent examples of relevant applications and future prospects of organic-phase optical biosensing are discussed.     

Extraction of the (C4H9)4N+Co(II)SCN− ion-pair in chloroform and in isoamyl alcohol: Spectrophotometric determination of cobalt

When excesses of ammonium thiocyanate and tetrabutylammonium chloride are added to a cobalt(II) solution, a water-insoluble ion-pair is formed; this compound is soluble in chloroform, isoamyl alcohol, and other solvents. The variables which affect the extractions by these two solvents are studied in order to obtain the optimal conditions and two alternative extraction procedures are proposed. Thus, the separation of cobalt as a previous step for its spectrophotometric determination is studied.