Cellulose/iron oxide hybrids as multifunctional pigments in thermoplastic starch based materials

Cellulose/iron oxide hybrids were prepared by the controlled hydrolysis of FeC₂O₄ in the presence of vegetable and bacterial cellulose fibres as substrates. By varying the relative amount of FeC₂O₄ and NaOH, either hematite or magnetic iron oxides were grown at the cellulose fibres surfaces. This chemical strategy was used for the production of a number of materials, whose coloristic properties associated to their reinforcement role allowed their use as new hybrid pigments for thermoplastic starch (TPS) based products. The TPS reinforced materials were characterized by several techniques in order to evaluate: the morphology and the compatibility between the matrix and the fillers; the mechanical reinforcement effect of the cellulose/iron oxide pigments on TPS and the coloristic properties of the composites. All materials showed good dispersion and strong adhesion for the cellulose/iron oxide nanocomposites in the TPS matrix thus resulting in improved mechanical properties.     

The BIOREMA project—part 3: International interlaboratory comparison for bio-ethanol test methods

The main objective of the reference materials for biofuel specifications (BIOREMA) project is the development of two test materials (one bio-ethanol material and one biodiesel material) with well-established reference values. Of a series of three papers, this part describes the material preparation, homogeneity study, stability study, and characterisation of the bio-ethanol material. The test material thus obtained was used in an interlaboratory comparison (ILC) to assess current practices and comparability amongst laboratories providing bio-ethanol testing services. Only 13 participants provided data, resulting in a small dataset for evaluation. Further, it appeared that for a number of laboratories, there was not sufficient material for the determination of all requested parameters. In most cases, as far as the data permit, it can be concluded that the consensus values (based on participant’s results) are in good agreement with the reference or the BIOREMA values (obtained by NMIs participating in the project). For three parameters, namely ethanol content, water content, and density, there is good agreement between the reference and consensus values. For these parameters, the reproducibility standard deviation is close to, or even smaller than, the expanded uncertainty associated with the reference value. A number of parameters show very poor reproducibility, for example, pH_e, electrolytic conductivity, and acidity. The same applies to sodium and copper content, which are very low and therefore challenging parameters to measure accurately. The results of the ILC underpin the need for certified reference materials and demonstrate the requirement for more robust quality control to improve the precision and trueness of the results from testing laboratories.     

Influence of pH and Matrix Components in the Chromatographic Response of Pesticides

The pH effect of potato, apple, and soil matrices on the chromatographic response of nine pesticides was evaluated. All chromatographic analyses were performed in duplicate on a gas chromatograph with electron capture detection. The matrix effect observed in the chromatographic response of the pesticides was evaluated by comparison. We compared the chromatographic response of each pesticide in pure solvent and in organic extract obtained for the matrices. The organic extracts were obtained by solid–liquid extraction with partition at low temperature. Depending on the matrix pH, a greater or lesser amount of co-extractives can be extracted into the organic phase, which affects the matrix effect. The pH of the samples before the extraction process was modified in order to check their influence on pesticide responses. Statistical analyses involving principal component analysis and marginal means revealed that, in the potato and apple matrices, the co-extractives exerted positive effects on the chromatographic response of the analytes. At lower pH, the extraction of co-extractives from potato and apple was favored, thus increasing the matrix effect for these samples.     

Electrochemical Determination of Sunscreens Agents in Cosmetic Using Square Wave Voltammetry

Sunscreen agents and in particular UV filters are compounds added in different cosmetic formulations, that has the function of preventing damage caused by sun exposition. Therefore, this paper proposes the development of a simple, fast and reliable electroanalytical method utilizing square wave voltammetry (SWV) to the determination of Benzophenone‐3 (BZ‐3), camphor 4‐methylbenzylidene (MBC) and 2‐ethylhexyl‐4‐methoxycinnamate (OMC) in cosmetic samples. The electrochemical system consisted of a cell with three electrodes: work – gold electrode modified, reference – Ag/AgCl_(sat) and auxiliary – platinum, using as supporting electrolyte 4.0 mL of Britton Robinson Buffer 0.04 mol L^?1 (pH=4.0), 1.0 mL of methanol and 5.50×10^?4 mol L^?1 of cetyltrimethylammonium bromide (CTAB). The method was validated using three commercial sunscreen samples and the results showed recovery values between 83 and 98 %. The average values found for the analysed samples were 3.49 % m/m (728 mg L^?1) to BZ‐3, 0.56 % m/m (113 mg L^?1) to MBC and 0.99 % m/m (208 mg L^?1) to OMC. The detection (DL) and quantification (QL) limits were 0.47 mg L^?1 and 1.56 mg L^?1 to BZ‐3, 0.77 mg L^?1 and 2.58 mg L^?1 to MBC and 0.78 mg L^?1 and 2.59 mg L^?1 to OMC, respectively. The sunscreen protector samples were also evaluated by high‐performance liquid chromatography (HPLC) demonstrating a good correlation between the results and compared the results with allowed concentration.     

Electrochemical Behaviour and Square Wave Voltammetry of the Rice Herbicides Molinate,Bensulfuron-Methyl,Mefenacet and Thiobencarb

Abstract

Cyclic, differential pulse and square wave voltammetry were applied to develop an electroanalytical procedure for the determination of a group of herbicides used to treat rice crops: molinate, bensul-ruron-methyl, mefenacet and thiobencarb. The oxidation mechanism causes adsorption problems and consequent poisoning of the electrode surface by the products of the electrochemical reaction. Parameters such as pH, frequency and electrochemical electrode surface treatment were optimized. The analytical methodology developed using square wave voltammetry was applied to the determination of molinate and bensulfuron-methyl in simple or mixed commercial products.     

Synthesis of alpha-glucuronic acid and amide derivatives in the presence of a participating 2-acyl protecting group

[reaction: see text] Participating acyl groups located at C-2 in glucosyl and related donors generally promote formation of 1,2-trans-glycosides. Reactions of some glucuronic acid donors with TMSN(3)/SnCl(4) or ROH/SnCl(4) gave only the 1,2-cis-glycoside. The stereoselectivity is consistent with participation of the C-6 group. The methodology was used for the synthesis of a Kdn2en mimetic with the alpha-configuration.     

Polyhydroxy pregnanes from Dregea volubilis

Three new polyhydroxy pregnanes named dregealol (1), volubilogenone (2) and volubilol (3) were isolated from the flowers of Dregea volubilis, and their structures elucidated from extensive 2D NMR analysis. The structure of volubilol (3) was confirmed by X-ray crystallographic studies. The known pregnane derivatives drevogenin D, iso-drevogenin P and 17α-marsdenin were also isolated.     

Phosphate diester hydrolysis and DNA damage promoted by new cis-aqua/hydroxy copper(II) complexes containing tridentate imidazole-rich ligands

The tridentate Schiff base [(2-(imidazol-4-yl)ethyl)(1-methylimidazol-2-yl)methyl)imine (HISMIMI) and its reduced form HISMIMA were synthesized and characterized, as well their mononuclear cis-dihalo copper(II) complexes 1 and 2, respectively. In addition, the dinuclear [CuII(mu-OH)2CuII](2+) complexes (3) and (4) obtained from complexes 1 and 2, respectively, were also isolated and characterized by several physicochemical techniques, including magnetochemistry, electrochemistry, and EPR and UV-vis spectroscopies. The crystal structures of 1 and 2 were determined by X-ray crystallography and revealed two neutral complexes with their tridentate chelate ligands meridionally coordinated. Completing the coordination spheres of the square-pyramidal structures, a chloride ion occupies the apical position and another is bonded in the basal plane. In addition, complexes 1 and 2 were investigated by infrared, electronic, and EPR spectroscopies, cyclic voltammetry, and potentiometric equilibrium studies. The hydrolytic activity on phosphate diester cleavage of 1 and 2 was investigated utilizing 2,4-BDNPP as substrate. These experiments were carried out at 50 degrees C, and the data treatment was based on the Michaelis-Menten approach, giving the following kinetic parameters (complex 1/complex 2): vmax (mol L(-1) s(-1))=16.4x10(-9)/7.02x10(-9); KM (mol L(-1))=17.3x10(-3)/3.03x10(-3); kcat (s(-1))=3.28x10(-4)/1.40x10(-4). Complex 1 effectively promoted the hydrolytic cleavage of double-strand plasmid DNA under anaerobic and aerobic conditions, with a rate constant of 0.28 h(-1) for the decrease of form I, which represents about a 10(7) rate increase compared with the estimated uncatalyzed rate of hydrolysis.     

Tailored Tolane-Perfluorotolane Assembly as Supramolecular Base Pair Replacement in DNA

Arene-fluoroarene interactions offer outstanding possibilities for engineering of supramolecular systems, including nucleic acids. Here, we implement the tolane-perfluorotolane interaction as base pair replacement in DNA. Tolane (THH) and perfluorotolane (TFF) moieties were connected to acyclic backbone units, comprising glycol nucleic acid (GNA) or butyl nucleic acid (BuNA) building blocks, that were incorporated via phosphoramidite chemistry at opposite positions in a DNA duplex. Thermodynamic analyses by UV thermal melting revealed a compelling stabilization by THH/TFF heteropairs only when connected to the BuNA backbone, but not with the shorter GNA linker. Detailed NMR studies confirmed the preference of the BuNA backbone for enhanced polar π-stacking. This work defines how orthogonal supramolecular interactions can be tailored by small constitutional changes in the DNA backbone, and it inspires future studies of arene-fluoroarene-programmed assembly of DNA.