Diels-Alder reaction of optically active (E)-γ-keto-α,β-unsaturated p-tolylsulfoxides with cyclopentadiene

The Diels-Alder reaction of enantiomerically pure (E)-γ-keto-α,β-unsaturated p-tolylsulphoxides 3 with cyclopentadiene give four easily separable diastereomers. The effect of several Lewis acids on the reaction was studied, finding a high endo selectivity with respect to the carbonyl group and moderate π-diastereoselectivity using BF₃·Et₂O as catalyst. The reactivity of compounds 3 as well as their endo selectivity are both higher than those observed for the corresponding (E)-3-sulfinylacrylates.     

Cross-linking of polyolefins: a study by thermoporosimetry with benzene derivatives as swelling solvents.

The solvents o-, m-, p-xylene, p-dichlorobenzene, 1,2,4-trichlorobenzene, and naphthalene were calibrated as condensates used in the thermoporosimetry technique. Exponential relationships were found connecting the pore radii R(p) (in nm) and the freezing-point depression of the swelling solvent deltaT (in degrees C) on the one hand and the apparent energy of crystallization W(a) (in J cm(-3)) and deltaT on the other hand: R(p) = t exp[-1/(c deltaT)]; W(a) = W0 exp(deltaT/f). Pore- or mesh-size distributions can be derived from differential scanning calorimetry results by using the following equation: dV(p)/dR(p) = k{[cY(T)deltaT2]/[W(a)R(p)]}. All the numerical parameters were determined. Polyethylene and polypropylene samples, cross-linked with high-energy electrons or gamma-rays, were submitted to thermoporosimetry study. Relative mesh-size distributions, which depend on the polymer/solvent pair, were calculated for these polyolefins with o-, m-, and p-xylene as solvent and were found to be in the same sequence as those of their degrees of swelling and the irradiation doses received.     

Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)

The preparation and identification of a series of trifluoromethylated and bis(trifluoromethylated) precursors and monomers for bridge substituted trifluoromethylated poly(p-phenylenevinylene) (PPV) is reported. These monomers were prepared in several steps from terephthaldicarboxaldehyde and they contain symmetrical and unsymmetrical combinations of leaving groups and/or polarizers, including chlorides, sulfoxides, sulphones, tosylates and S-methyl (and also O-ethyl) xanthates. The electron withdrawing effect of the trifluoromethyl group dominated the regioselectivity of substitution, thus allowing the convenient and selective formation of unsymmetrically substituted products in high yield.     

Novel selenium-containing non-natural diamino acids

The general synthesis of a new class of non-natural diamino acids, 2-amino-3-[(2′-aminoalkyl)seleno]propanoic acids, or Se-(aminoalkyl)selenocysteines, is reported. Under the conditions devised, enantiopure N-Boc-protected β-l-iodoamines, which are readily generated from proteinogenic α-amino acids, were treated with the selenolate anion obtained from NaBH₄ splitting of the Se-Se bond in commercial l-selenocystine. The Se-alkylation products were enantiomerically pure and the reaction is high yielding (92-98%), without any detectable traces of accompanying by-products.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 2. Potentiometric e-tongue for the determination of alkaline ions

An intelligent, automatic system based on an array of non-specific-response chemical sensors was developed. As a great amount of information is required for its correct modelling, we propose a system generating it itself. The sequential injection analysis (SIA) technique was chosen as it enables the processes of training, calibration, validation and operation to be automated simply. Detection was carried out using an array of potentiometric sensors based on PVC membranes of different selectivity. The diluted standard solutions needed for system learning and response modelling are automatically prepared from more concentrated standards. The electrodes used were characterised with respect to one and two analytes, by means of high-dimensionality calibrations, and the response surface of each was represented; this characterisation enabled an interference study of great practical utility. The combined response was modelled by means of artificial neural networks (ANNs), and thus it was possible to obtain an automated electronic tongue based on SIA. In order to identify the ANN which provided the best model of the electrode responses, some of the network's parameters were optimised and its usefulness in determining NH₄⁺, K⁺ and Na⁺ ions in synthetic samples was then tested. Finally, it was used to determine these ions in commercial fertilisers, the obtained results being compared with reference methods.     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.     

Experimental and computational investigation of the energetics of the three isomers of monochloroaniline

The standard (p degrees = 0.1 MPa) molar enthalpies of formation of 2-, 3-, and 4-chloroaniline were derived from the standard molar energies of combustion, in oxygen, at T = 298.15 K, measured by rotating bomb combustion calorimetry. The Calvet high-temperature vacuum sublimation technique was used to measure the enthalpies of vaporization or sublimation of the three isomers. These two thermodynamic parameters yielded the standard molar enthalpies of formation of the three isomers of chloroaniline, in the gaseous phase, at T = 298.15 K, as 53.4 +/- 3.1 kJ.mol(-1) for 2-chloroaniline, 53.0 +/- 2.8 kJ.mol(-1) for 3-chloroaniline, and 59.7 +/- 2.3 kJ.mol(-1) for 4-chloroaniline. These values, which correct previously published data, were used to test the computational methodologies used. Therewith, gas-phase acidities, proton affinities, electron donor capacities, and N-H bond dissociation enthalpies were calculated and found to compare well with available experimental data for these parameters.     

A study on the influence of the structure of the glycosyl acceptors on the stereochemistry of the glycosylation reactions with 2-azido-2-deoxy-hexopyranosyl trichloroacetimidates

The stereochemical outcome of glycosylations with 2-azido-2-deoxy-D-gluco- and D-galactopyranosyl trichloroacetimidates as glycosyl donors has been investigated by using a series of chiro-inositol derivatives as glycosyl acceptors. The influence of the absolute configuration, the conformation and the conformational flexibility of the glycosyl acceptor has been studied by using different glycosyl donors under similar pre-established experimental conditions. Although the structure of the acceptor may play a role in governing the stereochemistry of these glycosylations, the results show that, in general terms, the relative influence of these factors is difficult to evaluate. For a given set of experimental conditions, the stereochemical course of these glycosylations depends on structural features of both glycosyl donor and glycosyl acceptor. It is a balance of these factors, where the structure of the glycosyl donor always plays a major role, which determines the stereochemistry of the coupling reaction. Therefore, the examples reported in the literature in which the structure of the glycosyl acceptor appears to be crucial in determining the stereochemistry of the reaction constitute particularly favorable cases which do not presently allow any further generalization.     

Synthesis and spectral properties of new complexes between glycine and titanium(III), vanadium(III), chromium(III), iron(III), cobalt(II), nickel(II) and copper(II)

Summary Complexes of formula [MCl₃(glyH)₃] (M=Ti, V and Fe) [CrCl₃(glyH)₂H₂O], [MCl₂(glyH)₂(H₂O)₂] (M=Co and Cu) and [NiCl₂(glyH)₃H₂O] have been prepared and characterized by potentiometric curves, chemical analysis, magnetic properties, i.r. and electronic spectral data.