Comparison of stir bar sorptive extraction and membrane-assisted solvent extraction for the ultra-performance liquid chromatographic determination of oxazole fungicide residues in wines and juices

The present study compares two new sample preparation methods, stir bar sorptive extraction (SBSE) and membrane-assisted solvent extraction (MASE) coupled to the novel technique of ultra-performance liquid chromatography (UPLC) for the sensitive, selective and solvent-free determination of six oxazole fungicide residues (hymexazol, drazoxolon, vinclozolin, chlozolinate, oxadixyl and famoxadone) in wine and juices. The analytes were separated on a rapid resolution C(18) column (50 mm x 4.6 mm, I.D., 1.8 microm) thermostated at 50 degrees C with isocratic elution using a 50/50 (v/v) water/acetonitrile (ACN) mobile phase at a flow-rate of 1 mL min(-1) and detected by diode-array detection (DAD). The UPLC method rapidly separates the fungicides (7 min). The best results as regards sensitivity, repeatability and analyte recovery were obtained using SBSE with a polydimethylsiloxane (PDMS) twister, at 60 degrees C for 30 min with stirring at 1700 rpm in the presence of a 0.1M acetate/acetic acid buffer (pH 5) and 20% (m/v) sodium chloride. Liquid desorption was performed with 100 microL of a 80/20 (v/v) ACN/water solution in a desorption time of 15 min. With the PDMS polymer, an apolar phase, hymexazol and oxadixyl were not extracted. Consequently, the SBSE procedure can only be applied to the other four fungicides. Detection limits ranged from 0.05 to 2.5 microgL(-1) at a signal to noise ratio of 3, depending on the compound. Recoveries obtained for spiked samples were satisfactory (83-113%) for all compounds. The proposed method was successfully applied to the analysis of different samples, residues of chlozolinate and drazoxolon being found in samples of red wine and grape juice, respectively.     

Hydroxyapatite micro- and nanoparticles: nucleation and growth mechanisms in the presence of citrate species

Hydroxyapatite (HAP) particles with different morphologies were precipitated from homogeneous calcium/citrate/phosphate solutions at physiological temperature. Small variations of the starting solution pH in the range 7.4相似文献   

Solid-phase microextraction for the determination of haloanisoles in wines and other alcoholic beverages using gas chromatography and atomic emission detection

A headspace solid-phase microextraction (HS-SPME) method for the determination of 12 haloanisoles in wine and spirit samples using gas chromatography with atomic emission detection (GC-AED) was developed. The different factors affecting the efficiency of the extraction were carefully optimized. The divinylbenzene/Carboxen/polydimethylsiloxane (DVB/CAR/PDMS) fiber was the most suitable for preconcentrating the analytes from the headspace of the sample solution. Sample:water dilutions of 3:4 and 1:6 for wines and spirits, respectively, and the use of a mixed bromochloroanisole compound as internal standard allowed sample quantification against external standards prepared in the presence of 5% (v/v) ethanol. Detection limits ranged from 1.2 to 18.5ngL(-1), depending on the compound and the sample analyzed, with a fiber time exposure of 60min at 75 degrees C. The optimized method was successfully applied to different samples, and several of the studied haloanisoles were detected at concentration levels ranging from 10.3ngL(-1) to 1.14ngmL(-1).     

Synthesis and characterization of new trifluoromethyl substituted 3‐ethoxycarbonyl‐ and 3‐pyrimidin‐2‐yl)‐(1,2,3)‐oxathiazinane‐S‐oxides

This paper describes the synthesis and characterization of a new series of 4‐substituted‐3‐ethoxycarbonyl‐6‐trifluoromethyl‐(1,2,3)‐oxathiazinane‐S‐oxides and 3‐(4,6‐diphenyl‐pyrimidin‐2‐yl)‐6‐trifluoromethyl‐(1,2,3)oxathiazinane‐S‐oxides from the cyclization reaction of 4,4,4‐trifluoro‐3‐hydroxybutylcarbamates and 4‐(4,6‐diphenyl‐pyrimidin‐2‐ylamino)‐1,1,1‐trifluoro‐butan‐2‐ols with thionyl chloride. The analysis of the NMR data allowed us to define important features of the molecular structure. Significant chemical and structural differences were observed between the trifluoromethylated oxathiazinanes obtained in this work from other analogue compounds reported in the literature.     

A Chemical Proteomic Strategy Reveals Inhibitors of Lipoate Salvage in Bacteria and Parasites

The development of novel anti-infectives requires unprecedented strategies targeting pathways which are solely present in pathogens but absent in humans. Following this principle, we developed inhibitors of lipoic acid ( LA ) salvage, a crucial pathway for the survival of LA auxotrophic bacteria and parasites but non-essential in human cells. An LA -based probe was selectively transferred onto substrate proteins via lipoate protein ligase (LPL) in intact cells, and their binding sites were determined by mass spectrometry. Probe labeling served as a proxy of LPL activity, enabling in situ screenings for cell-permeable LPL inhibitors. Profiling a focused compound library revealed two substrate analogs ( LAMe and C3 ) as inhibitors, which were further validated by binding studies and co-crystallography. Importantly, LAMe exhibited low toxicity in human cells and achieved killing of Plasmodium falciparum in erythrocytes with an EC₅₀ value of 15 μM, making it the most effective LPL inhibitor reported to date.     

Structure-energy relationship in barbituric acid: a calorimetric, computational, and crystallographic study

This paper reports the value of the standard (p(o) = 0.1 MPa) molar enthalpy of formation in the gas phase at T = 298.15 K for barbituric acid. The enthalpies of combustion and sublimation were measured by static bomb combustion calorimetry and transference (transpiration) method in a saturated N2 stream and a gas-phase enthalpy of formation value of -(534.3 +/- 1.7) kJ x mol(-1) was determined at T = 298.15 K. G3-calculated enthalpies of formation are in very good agreement with the experimental value. The behavior of the sample as a function of the temperature was studied by differential scanning calorimetry, and a new polymorph of barbituric acid at high temperature was found. In the solid state, two anhydrous forms are known displaying two out of the six hydrogen-bonding patterns observed in the alkyl/alkenyl derivatives retrieved from the Cambridge Crystallographic Database. The stability of these motifs has been analyzed by theoretical calculations. X-ray powder diffraction technique was used to establish to which polymorphic form corresponds to the commercial sample used in this study and to characterize the new form at high temperature.     

Experimental and molecular dynamics simulation study of the sublimation energetics of cyclopentadienyltricarbonylmanganese (Cymantrene)

The standard molar enthalpy of sublimation of monoclinic cyclopentadienyltricarbonylmanganese, Mn(eta (5)-C 5H 5)(CO) 3, at 298.15 K, was determined as Delta sub H m (o)[Mn(eta (5)-C 5H 5)(CO) 3] = 75.97 +/- 0.37 kJ x mol (-1) from Knudsen effusion and Calvet-drop microcalorimetry measurements, thus considerably improving the very large inaccuracy (>10 kJ x mol (-1)) of the published data. The obtained value was used to assess the extension of the OPLS-based all-atom force field we previously developed for iron metallocenes to manganese organometallic compounds. The modified force field was able to reproduce the volumetric properties (density and unit-cell volume) of crystalline Mn(eta (5)-C 5H 5)(CO) 3 with a deviation of 0.6% and the experimentally determined enthalpy of sublimation with an accuracy of 1 kJ x mol (-1). The interaction (epsilon) and atomic-diameter (sigma) parameters of the Lennard-Jones (12-6) potential function used to calculate dispersion contributions within the framework of the force field were found to be transferable from iron to manganese.