The boron-catalyzed polymerization of dimethylsulfoxonium methylide. A living polymethylene synthesis

Trialkyl and aryl organoboranes catalyze the polymerization of dimethylsulfoxonium methylide (1). The product of the polymerization is a tris-polymethylene organoborane. Oxidation affords linear telechelic alpha-hydroxy polymethylene. The polymer molecular weight was found to be directly proportional to the stoichiometric ratio of ylide/borane, and polydispersities as low as 1.01-1.03 have been realized. Although oligomeric polymethylene has been the most frequent synthetic target of this method, polymeric star organoboranes with molecular weights of 1.5 million have been produced. The average turnover frequency at 120 degrees C in 1,2,4,5-tetrachlorobenzene/toluene is estimated at >6 x 10(6) g of polymethylene (mol boron)(-1) h(-1). The mechanism of the polyhomologation reaction involves initial formation of a zwitterionic organoborane.ylide complex which breaks down in a rate-limiting 1,2-alkyl group migration with concomitant expulsion of a molecule of DMSO. The reaction was found to be first order in the borane catalyst and zero order in ylide. DMSO does not interfere with the reaction. The temperature dependence of the reaction rate yielded the following activation energy parameters (toluene, DeltaH(++) = 23.2 kcal/mol, DeltaS(++) = 12.6 cal deg/mol, DeltaG(++) = 19.5 kcal/mol; THF, DeltaH(++) = 26.5 kcal/mol, DeltaS(++) = 21.5 cal deg/mol, DeltaG(++) = 20.1 kcal/mol).     

Metal complexes with a new N(4)O(3) amine pendant-armed macrocyclic ligand: synthesis, characterization, crystal structures, and fluorescence studies

The synthesis of a new oxaaza macrocyclic ligand, L, derived from O(1),O(7)-bis(2-formylphenyl)-1,4,7-trioxaheptane and tren containing an amine terminal pendant arm, and its metal complexation with alkaline earth (M = Ca(2+), Sr(2+), Ba(2+)), transition (M = Co(2+), Ni(2+), Cu(2+), Zn(2+), Cd(2+)), post-transition (M = Pb(2+)), and Y(3+) and lanthanide (M = La(3+), Er(3+)) metal ions are reported. Crystal structures of [H(2)L](ClO(4))(2).3H(2)O, [PbL](ClO(4))(2), and [ZnLCl](ClO(4)).H(2)O are also reported. In the [PbL] complex, the metal ion is located inside the macrocyclic cavity coordinated by all N(4)O(3) donor atoms while, in the [ZnLCl] complex, the metal ion is encapsulated only by the nitrogen atoms present in the ligand. pi-pi interactions in the [H(2)L](ClO(4))(2).3H(2)O and [PbL](ClO(4))(2) structures are observed. Protonation and Zn(2+), Cd(2+), and Cu(2+) complexation were studied by means of potentiometric, UV-vis, and fluorescent emission measurements. The 10-fold fluorescence emission increase observed in the pH range 7-9 in the presence of Zn(2+) leads to L as a good sensor for this biological metal in water solution.     

Synthesis of 1,2-di-(4-pyridyl)ethylenediamine and related compounds

Hydrolysis of N,N'-diacyl-1,2-di(4-pyridyl)ethylenediamines 1 in aqueous sulfuric acid gave the corresponding imidazolines 3. 1,2-Di-(4-pyridyl)ethylenediamine 2 was prepared in 61 % yield by treating N,N'-di-t-butyl-oxycarbonyl-1,2-di(4-pyridyl)ethylenediamine 4 with trifluoroacetic acid or in 94% yield by the hydrolysis under basic conditions of N,N'-diphthaloylglycyl-1,2-di(4-pyridy)ethylenediamine 13.     

Chemistry of polybutadiene—iron carbonyl systems

The treatment of polybutadienes with iron carbonyls results in formation of polymers containing tricarbonyl(conjugated diene)iron units [C₈H₁₂Fe(CO)₃] and also results in geometrical isomerization of free double bonds. Heating of the iron carbonyl-containing polymers gives ferromagnetic products with enhanced thermal stability. The incorporation of iron carbonyl groups into the polymer is favored by basic solvents and high temperatures, the geometrical isomerization by acidic solvents and low temperatures. Steric factors are powerful in determining the rate of isomerization.     

The effect of amino acid deletions and substitutions in the longest loop of GFP

Background  

The effect of single and multiple amino acid substitutions in the green fluorescent protein (GFP) from Aequorea victoria has been extensively explored, yielding several proteins of diverse spectral properties. However, the role of amino acid deletions in this protein -as with most proteins- is still unknown, due to the technical difficulties involved in generating combinatorial in-phase amino acid deletions on a target region.     

Structural analysis of metal interactions with the dinucleotide duplex, dCG x dCG, using ion mobility mass spectrometry

The metal binding properties of the dinucleotide duplex, dCG x dCG, were analyzed in the gas phase with ion mobility mass spectrometry. Both MALDI and ESI were used to generate [M(dCG x dCG)]+ complexes. The collision cross section of each complex was measured in helium using ion mobility based methods and compared to calculated cross sections of theoretical structures. When metal cations classified as hard acids were combined with dCG x dCG, the [M(dCG x dCG)]+ complex organized into a globular structure. However, when soft acid metal cations were examined, a structure was observed where the two C-G base pairs were Watson-Crick bound.     

A theory of nonvertical triplet energy transfer in terms of accurate potential energy surfaces: the transfer reaction from pi,pi* triplet donors to 1,3,5,7-cyclooctatetraene

Triplet energy transfer (TET) from aromatic donors to 1,3,5,7-cyclooctatetraene (COT) is an extreme case of "nonvertical" behavior, where the transfer rate for low-energy donors is considerably faster than that predicted for a thermally activated (Arrhenius) process. To explain the anomalous TET of COT and other molecules, a new theoretical model based on transition state theory for nonadiabatic processes is proposed here, which makes use of the adiabatic potential energy surfaces (PES) of reactants and products, as computed from high-level quantum mechanical methods, and a nonadiabatic transfer rate constant. It is shown that the rate of transfer depends on a geometrical distortion parameter gamma=(2g(2)/kappa(1))(1/2) in which g stands for the norm of the energy gradient in the PES of the acceptor triplet state and kappa(1) is a combination of vibrational force constants of the ground-state acceptor in the gradient direction. The application of the model to existing experimental data for the triplet energy transfer reaction to COT from a series of pi,pi(*) triplet donors, provides a detailed interpretation of the parameters that determine the transfer rate constant. In addition, the model shows that the observed decrease of the acceptor electronic excitation energy is due to thermal activation of C=C bond stretchings and C-C bond torsions, which collectively change the ground-state COT bent conformation (D(2d)) toward a planar triplet state (D(8h)).     

Kinetic spectrophotometric determination of indium/gallium mixtures

A kinetic method is presented for the determination of 0.5–5 μg ml^?1 gallium based on its activating effect on the copper(II)-catalyzed oxidation of 4,4′-dihydroxybenzophenone thiosemicarbazone by hydrogen peroxide. The reaction is monitored spectrophotometrically at 415 nm. Two sets of reaction conditions are established; one for the direct determination of gallium, and another, in which indium affects the gallium response, for determination of indium. Mixtures of these cations can be determined at μg ml^?1 levels and in gallium/indium ratios from 7.5:1 to 1:1.6, with an accuracy and precision of ca. 4.5%.     

Hydrogen bonding in 2‐amino‐4,6‐dimethoxypyrimidine, 2‐benzylamino‐4,6‐bis(benzyloxy)pyrimidine and 2‐amino‐4,6‐bis(N‐pyrrolidino)pyrimidine: chains of fused rings and a centrosymmetric dimer

Molecules of 2‐amino‐4,6‐di­methoxy­pyrimidine, C₆H₉N₃O₂, (I), are linked by two N—H?N hydrogen bonds [H?N 2.23 and 2.50 Å, N?N 3.106 (2) and 3.261 (2) Å, and N—H?N 171 and 145°] into a chain of fused rings, where alternate rings are generated by centres of inversion and twofold rotation axes. Adjacent chains are linked by aromatic π–π‐stacking interactions to form a three‐dimensional framework. In 2‐­benzylamino‐4,6‐bis(benzyloxy)pyrimidine, C₂₅H₂₃N₃O₂, (II), the mol­ecules are linked into centrosymmetric R(8) dimers by paired N—H?N hydrogen bonds [H?N 2.13 Å, N?N 2.997 (2) Å and N—H?N 170°]. Molecules of 2‐amino‐4,6‐bis(N‐pyrrolidino)­pyrimidine, C₁₂H₁₉N₅, (III), are linked by two N—H?N hydrogen bonds [H?N 2.34 and 2.38 Å, N?N 3.186 (2) and 3.254 (2) Å, and N—H?N 163 and 170°] into a chain of fused rings similar to that in (I).     

Structure and Electronic Properties of Fullerenes C52q+: Is C522+ an Exception to the Pentagon Adjacency Penalty Rule?

The structure, vibrational spectra and electronic properties of the neutral, singly and doubly charged C52 fullerenes were studied by means of the Hartree-Fock method and density functional theory. Different isomers were considered, in particular those with the lowest possible number (five or six) of adjacent pentagons, and an isomer with a four-atom ring. For neutral and singly charged species, the most stable isomer is that with the lowest number of adjacent pentagons, namely five. However, for C(52)2+, the most stable structure has six adjacent pentagons. This finding, which contradicts the pentagon adjacency penalty rule, is a consequence of complete filling of the HOMO pi shell and the near-perfect sphericity of the most stable isomer. The simulated vibrational spectra show important differences in the positions and intensities of the vibrations for the different isomers.