Kinetics and mechanism of the oxidation of 2-furancarbox-aldehyde by thallium(III) in perchloric acid solutions

The kinetics of the oxidation of 2-furancarboxaldehyde by thallic perchlorate at 50°C obeys the rate law

Matrix-assisted laser desorption/ionization time-of-flight analysis of Bacillus spores using a 2.94 microm infrared laser

The performance of infrared (2.94 microm) and ultraviolet (337 nm) lasers were compared for analysis of purified spores of B. subtilis, B. cereus and B. globigii on a four-inch end-cap reflectron time-of-flight instrument. Infrared matrix-assisted laser desorption/ionization (IR-MALDI) mass spectra of these microorganisms displayed a larger number of biomarker peaks above m/z 4000, compared with UV-MALDI. Biomarker peaks were observed at higher m/z values with the IR laser.     

Neuron-based microarray sensors for environmental sensing

We present a novel sensing scheme for detecting the effects of unburned fossil fuels by integrating microarray technology and dielectrophoresis to develop single-neuron arrays. These arrays have the capability to sense and identify the two fuels, at parts per billion (ppb) concentrations, as well to determine the associated physiological changes at the single-cell level. Identification is achieved through frequency domain analysis of the measured changes to the extracellular electrical activity due to the effect of the fossil fuels. This yields unique electrical identifiers known as "signature patterns". Simultaneous optical visualization to the physiological changes is obtained by specific fluorescent staining. The correlation between the signature patterns and the cellular biological behavior establishes the veracity of this identification technique.     

Quantitative tests of mixed crystal excition theory. I. Naphthalene monomer1B2u and 3B1u spectra

A quantitative, computer processed spectroscopic study, using photon counting, on the first excited triplet and singlet states of dilute isotopic mixed crystals of naphthalene at 2 K is presented for C₁₀H₈; 1-DC₁₀H₇; 2-DC₁₀H₇; 1,4-D₂C₁₀H₆; 1,4,5-D₃C₁₀H₅; 1,4,5,8-D₄C₁₀H₄; 1,2,4,5,8-D₅C₁₀H₃; a β-D₄C₁₀H₄ and a β₂-D₆C₁₀H₂ as guests in C₁₀D₈ host crystals (and, for comparison, also for the same guests in a durene host crystal). The guest—host relative polarization Rashba formula has been verified quantitatively, and, as an added bonus, the elusive polarization ratio of the pure naphthalene crystal singlet Davydov components has been found to be 80 ± 20 (b/a), which is in poor agreement with the transition octupole—transition octupole model. The experimental guest energies and their concomitant quasiresonance shifts for bound singlet states (as well as the occurrences of unbound states) are in excellent quantitative agreement (about 1 cm^?1) with those calculated using a Green's function formalism based on the ideal mixed crystal approximation and on a restricted Frenkel type dispersion relation derived from resonance pairs. The same Green's function also accounts quantitatively (within 10%) for the guest singlet state exciton localizations (guest excitation amplitudes). The triplet exciton state reveals an orientational site splitting (about 0.7 cm^?1) for the 0—0 transition of the I-DC₁₀H₇ guest in C₁₀D₈ host. The order of the α and β substituted deuteronaphthalenes in the triplet state is reversed from that of the singlet state. The last two observations are related to the different nature of the lowest Π-Π^* singlet and triplet states of naphthalene.     

Photochemistry of bicyclo[2.2.2]oct-7-ene-2,5-diones and the corresponding 5-hydroxyimino and 5-methylene derivatives

Synthesis and photochemistry of several title compounds 1-3 containing multiple chromophoric systems are described. The Diels-Alder reactions of 2,6,6-trimethylcyclohexa-2,4-dienone (5) with acetylenes 6a-d provided the adducts 7a-d, which upon hydrolysis furnished the desired bicyclo[2.2.2]octenediones 1a-d. Oximes 2a-d were prepared from diones 1a-d by treatment with hydroxylamine hydrochloride in pyridine. 5-Methylenebicyclo[2.2.2]oct-7-en-2-ones 3a-d were obtained via chemoselective Wittig reaction of the corresponding diones 1a-d. Bicyclo[2.2.2]octenediones 1a-c underwent chemoselective oxa-di-pi-methane rearrangement under sensitized conditions and suffered formal ketene extrusion upon direct irradiation. Direct irradiation of 1d afforded 11d via formal ketene extrusion but under sensitization it remained unchanged. Oximes 2a-d suffered ketene extrusion upon direct irradiation and E/Z isomerization under sensitized conditions. On the other hand, 5-methylenebicyclo[2.2.2]oct-7-en-2-ones 3a-d generally underwent 1,3-acyl shift. The plausible courses of all these photochemical processes are discussed.     

Solvent water tapes in two hydrates of μ‐oxo‐bis­[bis­(2,2′‐bipyridine‐κ2N,N′)(sulfato‐κO)iron(III)]

The title compound, [Fe₂O(SO₄)₂(C₁₀H₈N₂)₄], crystallizes as two different hydrates, viz. 11H₂O, (I), and 15H₂O, (II). The complex is binuclear, in which the two Fe^III atoms are coordinated in an octa­hedral geometry to four N atoms from the two bipyridine ligands, to one O atom from the sulfate ion and to an oxide ion on a twofold axis, which acts as a bridge between the symmetry‐related units. The Fe⋯Fe separation is 3.556 (4) Å and the Fe—O—Fe angle is 161.6 (2)° in (I); the corresponding values are 3.544 (1) Å and 165.8 (2)° in (II). In (II), one of the O atoms of the sulfate ion is disordered over two positions. In both compounds, the solvent water mol­ecules form slightly different one‐dimensional hydrogen‐bonded networks which pass along the c axis of the unit cell. In (I), three solvent water mol­ecules and, in (II), one solvent water mol­ecule, are situated on the twofold axis. In both (I) and (II), the central O atom of the metal complex lies on a twofold axis.     

Electrochemical and chemical polymerization of acrylamide

The electrochemical and chemical polymerization of acrylamide (AA) has been studied. The electrolysis of the monomer in N,N-dimethylformamide (DMF) containing (C₄H₉)₄NClO₄ as the supporting electrolyte leads to polymer formation in both anode and cathode compartments. The cathodic polymer dissolves in the reaction mixture and the anodic polymer precipitates during the course of polymerization. A plausible mechanism for the anodic and cathodic initiation reaction has been given. The chemical polymerization of acrylamide that has been initiated by HClO₄ is analogous to its anodic polymerization. The polymer yield increases with an increase in concentration of the monomer and HClO₄. Raising the reaction temperature also enhances the polymerization rate. The overall apparent activation energy of the polymerization was determined to be ca. 19 kcal/mole. The copolymerization of acrylamide was carried out with methyl methacrylate (MMA) in a solution of HClO₄ in DMF. The reactivity ratios are r₁ (AA) = 0.25 and r₂ = 2.50. The polymerization with HClO₄ appears to be by a free radical mechanism. When the polymerization of acrylamide is carried out with HClO₄ in H₂O, a crosslinked water-insoluble gel formation takes place.     

Chitosan Encapsulated Meloxicam Nanoparticles for Sustained Drug Delivery Applications: Preparation,Characterization, and Pharmacokinetics in Wistar Rats

Meloxicam (MLX) is currently used in the therapeutic management of both acute and chronic inflammatory disorders such as pain, injuries, osteoarthritis, and rheumatoid arthritis in both humans and animals. Gastrointestinal toxicity and occasional renal toxicity were observed in patients taking it for a long-term period. Meloxicam’s late attainment of peak plasma concentration results in a slow onset of action. The goal of the current study was to prepare and characterize chitosan encapsulated meloxicam nanoparticles (CEMNPs) with high bioavailability and less gastro intestinal toxicity in order to prevent such issues. The size of the prepared CEMNPs was approximately 110–220 nm with a zetapotential of +39.9 mV and polydispersity index of 0.268, suggesting that they were uniformly dispersed nanoparticles. The FTIR and UV-Vis spectroscopy have confirmed the presence of MLX in the prepared CEMNPs. The pharmacokinetics have been studied with three groups of male Wistar rats receiving either of the treatments, viz., 4 mg·kg⁻¹ of MLX and 1 or 4 mg·kg⁻¹ of CEMNPs. Plasma samples were collected until 48 h post administration, and concentrations of MLX were quantified by using reverse (C₁₈) phase HPLC. Non-compartmental analysis was applied to determine pharmacokinetic variables. Upon oral administration, the maximum concentration (C_max) was reached in 4 h for CEMNPs and 6 h for MLX. The mean area under the plasma MLX concentration-time curve from ‘zero’ to infinity (AUC_0–∞), half-life (t_1/2β), and mean resident time (MRT) of 1 mg·kg⁻¹ of CEMNPs was 1.4-, 2-, and 1.8-fold greater than 4 mg·kg⁻¹ of MLX. The prepared CEMNPs demonstrated quicker absorption and prolonged release along with a significant improvement in the bioavailability of MLX, paving a prospective path for the development of drugs with enhanced bioavailability with less side effects.     

Simultaneous Dispersive Liquid–Liquid Microextraction and Determination of Different Polycyclic Aromatic Hydrocarbons in Surface Water

Polycyclic aromatic hydrocarbons (PAHs) are a class of persistent organic pollutants of water, and their determination at trace levels in the aquatic ecosystems is essential. In this work, an ultrasound-assisted dispersive liquid–liquid microextraction (DLLME) procedure was suggested utilizing a binary dispersive agent for recovery of different molecular weight polycyclic aromatic hydrocarbons (PAHs) from waters. The detection was carried out by gas chromatography–mass spectrometry (GC-MS) as well as high-performance liquid chromatography with fluorescence and diode-array detection (HPLC-FD/PDA). The method was optimized for the extraction of analytes with respect to the mixture composition, ratios of components, ultrasonication time and centrifugation parameters. The analytical schemes for PAHs extraction from water samples using different ratios of extraction and dispersive solvents are reported. The mixture consisting of chloroform and methanol was applied for the extraction of PAHs containing two or three fused aromatic rings; the mixture of chloroform and acetonitrile is suitable for PAHs containing more than four aromatic rings. The mixture of chloroform:acetone + acetonitrile was applied in the universal scheme and allowed for the simultaneous extraction of 20 PAHs with different structures. The developed sample preparation schemes were combined with GC-MS and HPLC-FD/PDA, which allowed us to determine the analytes at low concentrations (from 0.0002 µg/L) with the recoveries exceeding 80% and relative standard deviations of about 8%. The developed methods for the determination of 20 PAHs were applied to the analysis of water samples from the Karasun Lake (Krasnodar), Azov Sea (Temryuk) and Black Sea (Sochi).     

Phytochemical Mediated Sol–Gel Synthesis,Crystallographic Structure,Morphology and Optical Investigations on ZnO Nanoparticles

Journal of Cluster Science - Zinc oxide nanoparticles were synthesized through sol–gel technique using Azadirachta indica leaves extract. The formation of structure, crystallite parameters,...