Crystal structure, physical properties and HRTEM investigation of the new oxonitridosilicate EuSi2O2N2

The new layered oxonitridosilicate EuSi₂O₂N₂ has been synthesized in a radio‐frequency furnace at temperatures of about 1400 °C starting from europium(III ) oxide (Eu₂O₃) and silicon diimide (Si(NH)₂). The structure of the yellow material has been determined by single‐crystal X‐ray diffraction analysis (space group P1 (no. 1), a=709.5(1), b=724.6(1), c=725.6(1) pm, α=88.69(2), β=84.77(2), γ=75.84(2)°,V=360.19(9)×10⁶ pm³, Z=4, R1=0.0631, 4551 independent reflections, 175 parameters). Its anionic Si₂O₂N₂^2? layers consist of corner‐sharing SiON₃ tetrahedra with threefold connecting nitrogen and terminal oxygen atoms. High‐resolution transmission electron micrographs indicate both ordered and disordered crystallites as well as twinning. Magnetic susceptibility measurements of EuSi₂O₂N₂ exhibit Curie–Weiss behavior above 20 K with an effective magnetic moment of 7.80(5) μ_B Eu^?1, indicating divalent europium. Antiferromagnetic ordering is detected at 4.5(2) K. EuSi₂O₂N₂ shows a field‐induced transition with a critical field of 0.50(5) T. The four crystallographically different europium sites cannot be distinguished by ¹⁵¹Eu Mössbauer spectroscopy. The room‐temperature spectrum is fitted by one signal at an isomer shift of δ=?12.3(1) mm s^?1 subject to quadrupole splitting of ΔE_Q=?2.3(1) mm s^?1 and an asymmetry parameter of 0.46(3). Luminescence measurements show a narrow emission band with regard to the four crystallographic europium sites with an emission maximum at λ=575 nm.     

Synthesis of ordered mesoporous Fe3O4 and gamma-Fe2O3 with crystalline walls using post-template reduction/oxidation

Ordered mesoporous Fe(3)O(4) with crystalline walls (inverse spinel structure) has been synthesized for the first time, representing to the best of our knowledge, the first synthesis of a reduced mesoporous iron oxide. Synthesis was achieved by reducing ordered mesoporous alpha-Fe(2)O(3) (corundum structure) to Fe(3)O(4) spinel then to gamma-Fe(2)O(3) by oxidation, while preserving the ordered mesostructure and crystalline walls throughout. Such solid/solid transformations demonstrate the stability of the mesostructure to structural phase transitions from the hexagonal close packed oxide subarray of alpha-Fe(2)O(3) (corundum structure) to the cubic close packed subarray of Fe(3)O(4) spinel and gamma-Fe(2)O(3). Preliminary magnetic measurements reveal that the spins in both Fe(3)O(4) and gamma-Fe(2)O(3) are frozen at 295 K, despite the wall thickness (7 nm) being less than the lower limit for such freezing in corresponding nanoparticles (>8 nm).     

Anti-biofouling properties of comblike block copolymers with amphiphilic side chains

Surfaces of novel block copolymers with amphiphilic side chains were studied for their ability to influence the adhesion of marine organisms. The surface-active polymer, obtained by grafting fluorinated molecules with hydrophobic and hydrophilic blocks to a block copolymer precursor, showed interesting bioadhesion properties. Two different algal species, one of which adhered strongly to hydrophobic surfaces, and the other, to hydrophilic surfaces, showed notably weak adhesion to the amphiphilic surfaces. Both organisms are known to secrete adhesive macromolecules, with apparently different wetting characteristics, to attach to underwater surfaces. The ability of the amphiphilic surface to undergo an environment-dependent transformation in surface chemistry when in contact with the extracellular polymeric substances is a possible reason for its antifouling nature. Near-edge X-ray absorption fine structure spectroscopy (NEXAFS) was used, in a new approach based on angle-resolved X-ray photoelectron spectroscopy (XPS), to determine the variation in chemical composition within the top few nanometers of the surface and also to study the surface segregation of the amphiphilic block. A mathematical model to extract depth-profile information from the normalized NEXAFS partial electron yield is developed.     

Interpolyelectrolyte complexes: a single-molecule insight

Polyelectrolyte (PE) complexes (PECs) between long polycation poly(methacryloyloxyethyl dimethylbenzylammonium chloride) and short polyanion polystyrene sulfonic acid adsorbed onto mica were studied by atomic force microscopy. If one component is taken in excess, then a rapid coupling of the oppositely charged polyions first leads to the formation of nonequilibrium structures when collapsed PEC particles coexist with unreacted PEs molecules. The equilibrium PEC particles possess micelle-like core-shell morphology if the short polyion is taken in excess. When long PE is given in excess, equilibrium PECs are stabilized by wrapping the long polyion around hydrophobic segments of the PEC. We propose that transformations of initially formed nonequilibrium aggregates proceed through slow reactions (addition or/and substitution) of primary complexes with unreacted PEs chains, which finally leads to equilibrium PECs with optimized morphology. As expected, the mixing of oppositely charged PEs in a near-stoichiometric ratio leads to highly aggregated water-insoluble PECs.     

o-DPPB-directed copper-mediated and -catalyzed allylic substitution with Grignard reagents

The ortho-diphenylphosphanylbenzoyl (o-DPPB) group was explored as a directing leaving group in copper-mediated and copper-catalyzed allylic substitution with Grignard reagents. Complete control of chemo-, regio- and stereoselectivity with complete syn-1,3-chirality transfer was observed as a result of the directed nature of the reaction. No excess of organometallic reagent is required and the directing group can be recovered quantitatively. Coordination studies in the solid state and in solution have shown that two substrates are bound via the phosphine function of the directing group at copper. Dynamic NMR experiments in solution are in agreement with a ligand-exchange process at copper, a prerequisite for the development of a substoichiometric process.     

Electron binding energies of hydrated H3O+ and OH-: photoelectron spectroscopy of aqueous acid and base solutions combined with electronic structure calculations

The electronic structure of hydrated H3O+ and OH- is probed in a water jet by photoelectron spectroscopy employing 100 eV photons. The first ionization potential for OH- at 9.2 eV and the second ionization potential for H3O+ at 20 eV are resolved, corresponding to the removal of an electron from the 2ppi highest occupied molecular orbital and from the 1e orbital, respectively. These assignments are supported by present computational results based on a combination of molecular dynamics and ab initio calculations.     

Protonolysis of the Hg-C bond of chloromethylmercury and dimethylmercury. A DFT and QTAIM study

Possible mechanisms for degrading chloromethylmercury (CH(3)HgCl) and dimethylmercury [(CH3)2Hg] involving thiol and ammonium residues were investigated by DFT and atoms-in-molecules (QTAIM) calculations. Using H2S and HS- as models for thiol and thiolate groups RSH and RS-, respectively, we obtained transition states and energy barriers for possible decomposition routes to Hg(SH)2 based on a model proposed by Moore and Pitts (Moore, M. J.; Distefano, M. D.; Zydowsky, L. D.; Cummings, R. T.; Walsh, C. T. Acc. Chem. Res. 1990, 23, 301. Pitts, K. E.; Summers, A. O. Biochemistry 2002, 41, 10287). Demethylation was found to be a multistep process that involved initial substitution of Cl- by RS-. We found that successive coordination of Hg with thiolates leads to increased negative charge on the methyl group and facilitates the protonolysis of the Hg-C bond by H-SH. This was also found to be the case for (CH3)2Hg. We found that NH4(+) readily protonolyzes the Hg-C bond of these thiolate complexes, suggesting that ammonium residues of protonated amino acids might also act as effective proton donors.     

Designing new Baeyer-Villiger monooxygenases using restricted CASTing

This paper outlines the design and execution of the first mini-evolution of cyclopentanone monooxygenase (CPMO). The methodology described is a relatively inexpensive and rapid way to obtain mutant enzymes with the desired characteristics. Several successful mutants with enhanced enantioselectivities were identified. For example, mutant-catalyzed oxidation of 4-methoxycyclohexanone gave the corresponding lactone with 92% entantiometric excess (ee) compared to the 46% ee achieved with wild-type cyclohexanone monoxygenase (WT-CHMO). The original design of the mini-evolution and the following evaluation of mutants can provide valuable insights into the active site's construction and dynamics and can suggest other catalytically profitable mutations within the putative active site.     

Electro-optic fiber sensor for amplitude and phase detection of radio frequency electromagnetic fields

We present a miniature fiber-optic electromagnetic field (EMF) sensor that is capable of simultaneously detecting the amplitude and phase of an EMF in the range of 0.1-6 GHz. We focus on magnetic field measurements, since the H-field is more significant in our target applications due its direct relation to the current. The sensor is based on an open optical platform to which various antennas can be attached and contains a radio-frequency amplifier for signal conditioning and a vertical-cavity surface-emitting laser as an electro-optic converter. The millimeter size and the full electrical isolation of the sensor allow EMF detection with minimal disturbance. We have characterized the sensor in the near field of a lambda/2 dipole, a rectangular waveguide, and a microstrip line, and we explain the experimental results with a simple theoretical model confirming the mapped near-field distribution of the investigated field source.     

Transparent,Versatile Chemical Vapor Sensor Using Supramolecular Assembly of Block Copolymer and Carbon Nanotubes

Here, a simple and novel approach is reported for developing a new class of transparent chemical vapor sensors with a low power consumption, high sensitivity, good selectivity, and excellent environmental stability by depositing multiwalled carbon nanotubes on prepatterned polymer substrates using supramolecular assembly. The patterned polymer substrates were fabricated from block copolymers, whereas the supramolecular assembly between the carbon nanotubes and block copolymer is utilized for the selective localization of carbon nanotubes at the block copolymer–air interface. The thin film devices made from the block copolymer and carbon nanotubes are highly transparent (transmittance > 90%) and respond to a wide range of solvents of different polarity, both hydrophilic and hydrophobic, with good selectivity and fast response time.