Corrosion behavior of low energy,high temperature nitrogen ion-implanted AISI 304 stainless steel

This work presents the results of a low-energy nitrogen ion implantation of AISI 304 type stainless steel (SS) at a moderate temperature of about 500°C. The nitrogen ions are extracted from a Kauffman-type ion source at an energy of 30 keV, and ion current density of 100 μA cm⁻². Nitrogen ion concentration of 6 × 10¹⁷, 8 × 10¹⁷ and 10¹⁸ ions cm⁻², were selected for our study. The X-ray diffraction results show the formation of CrN polycrystalline phase after nitrogen bombardment and a change of crystallinity due to the change in nitrogen ion concentration. The secondary ion mass spectrometry (SIMS) results show the formation of CrN phases too. Corrosion test has shown that corrosion resistance is enhanced by increasing nitrogen ion concentration.      

Measurement Error Correction for Distributed Properties – Filter Cake Thickness Measurements

The measurement of a distributed property is frequently encountered in engineering applications. The impact of a possible measurement error on the measured distribution is described and two methods to account for such an error are detailed: A Fourier transform based deconvolution procedure and a moment based deconvolution approach via kernel estimators are presented. The deconvolution methods can be used in many particle characterization and process applications where particle features or properties are commonly presented in a distributed form. In the current instance, these methods are carefully explored by using artificially generated data and applied to experimental data obtained from filter cake thickness measurements.     

Synthesis of attapulgite-MnO2 nanocomposite from manganese complex by ultrasound for hydrogen storage

The research included the synthesis of a new complex of manganese with 3,4,5-tri-methoxybenzoic acid in the presence of triethylamine as a base to which gives the complex with formula [Mn (TMB)₂].2H₂O. This complex was characterized by FTIR, CHN, magnetic susceptibility and thermal analysis. Furthermore, this complex was used as a novel precursor of manganese in preparing the attapulgite-MnO₂ nanocomposite by one-pot addition method using ultrasound. The resulting nanocomposite was characterized by X-ray diffraction and TEM and the results prove that this composite was found as nanochannel of the diameter 45 nm decorated with 26–41 nm of MnO₂ nanoparticles. The attapulgite-MnO₂ nanocomposite was used in the application of hydrogen storage, and the results proved that attapulgite-MnO₂ nanocomposite has the ability to store 3.55 wt% of hydrogen under a pressure of 90 bar and a temperature of 77 K. Furthermore, the measurement demonstrated that increasing the pressure increased the stored hydrogen, implying that the stored gas will be liberated by altering the pressure, implying that the storage will be of the physical kind.     

Design,synthesis and antibacterial activity evaluation of novel 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide derivatives

In this paper, a novel series of 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide derivatives are synthesized in two steps. The first step involved Ugi multicomponent reaction of β-alanine, o-(propargyl)benzaldehyde and isocyanide derivatives. The product of this step, underwent a click 1,3-dipolar cycloaddition reaction with benzyl azide derivatives. The 2-(4-((1-aryl-1H-1,2,3-triazol-4-yl)methoxy)phenyl)2-(2-oxoazetidin-1-yl)acetamide product was characterized and their antibacterial activities were evaluated against various G-positive (Staphylococcus aureus and Bacillus subtilis) and G-negative (Pseudomonas aeruginosa and Escherichia coli) bacteria, using minimal inhibition concentration. The compounds showed very good antimicrobial activity and a number of products have been more active than ciprofloxacin.     

Tailoring the optical and magnetic properties of La-BaM hexaferrites by Ni substitution

We investigate the impact of Ni insertion on the structural,optical,and magnetic properties of Ba_0.8La_0.2Fe_12-xNi_xO₁₉hexaferrites(Ni substituted La-BaM hexaferrites).Samples were prepared using the conventional co-precipitation method and sintered at 1000℃for 4 hours to assist the crystallization process.An analysis of the structure of the samples was carried out using an x-ray diffraction(XRD)spectrometer.The M-type hexagonal structure of all the samples was confirmed using XRD spectra.The lattice parameters a and c were found to be in the ranges of 5.8925±0.001 nm–5.8952±0.001 nm and 23.2123±0.001 nm–23.2219±0.001 nm,respectively.The M-type hexagonal nature of the prepared samples was also indicated by the presence of corresponding FT-IR bands and Raman modes in the FT-IR and Raman spectra,respectively.EDX results confirmed the successful synthesis of the samples according to the required stoichiometric ratio.A UV-vis spectrometer was used to record the absorption spectra of the prepared samples in the wavelength range of 200 nm–1100 nm.The optical energy bandgap of the samples was found to be in the range of 1.21 eV–3.39 eV.The M–H loops of the samples were measured at room temperature at an applied magnetic field range of 0 kOe–60 kOe.A high saturation magnetization of 99.92 emu/g was recorded in the sample with x=0 at a microwave operating frequency of 22.2 GHz.This high value of saturation magnetization is due to the substitution of La3+ions at the spin-up(12k,2a,and 2b)sites.The Ni substitution is proven to be a potential candidate for the tuning of the optical and magnetic parameters of M-type hexaferrites.Therefore,we suggest that the prepared samples are suitable for use in magneto-optic applications.     

Synthesis of (R)-alpha-benzylmethionine: a novel rearrangement during alkylation of the Seebach (R)-methionine oxazolidinone

Alkylation of the enolate of the Seebach (R)-methionine oxazolidinone with benzyl bromide gave the expected benzylated product in low yield. The major product was a novel amine arising from oxazolidinone cleavage, decarboxylation, alkylation and finally hydrolysis. The rearrangement could be suppressed by using a more reactive electrophile or by using the N-Cbz instead of the N-benzoyl protecting group, and the required (R)-alpha-benzyl-methionine was obtained in 78% yield and in an enantiomeric ratio of 90:10.     

The effect of oxidation on physical properties of porous silicon layers for optical applications

In order to understand the optical loss mechanisms in porous silicon based waveguides, structural and optical studies have been performed. Scanning and transmission electron microscopic observations of porous silicon layers are obtained before and after an oxidation process at high temperature in wet O₂. Pore size and shape of heavily p-type doped Si wafers are estimated and correlated to the optical properties of the material before and after oxidation. The refractive index was measured and compared to that determined by the Bruggeman model.     

“Hot Potato Voice” in Peritonsillitis: A Misnomer

The "hot potato voice" is widely recognized as a symptom of peritonsillar cellulitis or abscess; yet there have been no studies assessing the resonance characteristics of the vocal tract in peritonsillitis. Analysis was undertaken of formant frequencies in the articulation of the vowels /i:/. /a:/ and /u:/ in six subjects with peritonsillitis and compared with articulation once the peritonsillitis had settled. Significant variation was found in F1 when articulating /i:/ and in F2 when articulating /a:/, which are explainable by dyskinesis of the peritonsillar musculature. These findings were compared with six subjects articulating the same vowels with and without a hot potato in their mouth. Variation was found in both F1 and F2 when articulating /i:/, which can be related to interference of the potato with movement of the anterior tongue. The changes in the vocal tract differ in these two cases and the title "hot potato voice" in peritonsillitis is a misnomer.