Synthesis of mesoporous functional hematite nanofibrous photoanodes by electrospinning

Iron(III) oxide (hematite, Fe₂O₃) nanofibers, as visible light‐induced photoanode for water oxidation reaction of a water splitting process, were fabricated through electrospinning method followed by calcination treatment. The prepared samples were characterized with scanning electron microscopy, and three‐electrode galvanostat/potentiostat for evaluating their photoelectrochemical (PEC) properties. The diameter of the as‐spun fibers is about 300 nm, and calcinated fibers have diameter less than 110 nm with mesoporous structure. Optimized multilayered electrospun α‐Fe₂O₃ nanostructure mats showed photocurrent density of 0.53 mA/cm² under dark and visible illumination conditions at voltage 1.23 V and constant intensity (900 mW/cm²). This photovoltaic performance of nanostructure mats makes it suitable choice for using in the PEC water splitting application as an efficient photoanode. This method, if combined with appropriate flexible conductive substrate, has the potential for producing flexible hematite solar fuel generators. Copyright © 2015 John Wiley & Sons, Ltd.     

Position calculation of the frequency band gap in the finite photonic crystal with multiple alternations using boundary element method

In this paper, the wave transmission from finite photonic crystals with multiple alternations is investigated using boundary element method (BEM). Since that, in these structures the alternation is not in all directions of space; the investigations of the frequency band gap with desired accuracy are not practical by analytical methods. Also, the frequency dispersion of dielectric rods is an effective parameter in photonic crystals, which this effect in our calculations has been considered. Due to the high capabilities of the BEM, the transmitted wave spectrum in the photonic crystal is calculated by changing the geometrical and optical parameters of the photonic crystal and applying more alternation in its structure and the position and width of the frequency band gap is investigated. Then, it is assumed that the photonic crystal with an arbitrary angle is rotated around the axis which is perpendicular on the crystal cross section and then, it is irradiated with a plan wave. The band gap of the photonic crystals with the desired structure, desired rotation angle and multiple alternations have been solved. Very low information volume, high speed and accuracy during the calculation and useable for any desired structures are the characteristics of this method.     

Deuterium NMR spectroscopy is a versatile and economical tool for monitoring reaction kinetics in ionic liquids

Time-resolved 2H NMR spectroscopy is used to monitor the progress of and gain kinetic information for a variety of reactions in different ionic media.     

Nuclear model calculation on charge particle induced reaction on Rb and Kr targets and targetry for 82Sr production

The ⁸²Sr/⁸²Rb radionuclide generator is used very commonly in positron emission tomography. ALICE/ASH and TALYS 1.0 codes were used to calculate excitation functions for proton, alpha and ³He induced on various targets that lead to produce ⁸²Sr radioisotope using intermediate energy accelerators. Recommended thickness of the targets according to SRIM code was premeditated. The application of those data, particularly in the calculation of integral yields, is discussed and theoretical integral yields for any reaction were computed. To consider precision of TALYS 1.0 code calculations, ⁸⁵Rb(p,4n)⁸²Sr process was determined as most interesting one due to radionuclide purity. The TALYS 1.0 code predicts a maximum cross-section of about 130 mb at 47 MeV for this reaction. Rubidium chloride deposition on copper substrate was carried out via sedimentation method in order to produce ⁸²Sr. 2.98 g RbCl, 1.043 g ethyl cellulose, 10 mL acetone were used to prepare a layer of enriched rubidium chloride of 11.69 cm² area and 0.34 g/cm² thickness.     

Time-dependent natural convection in a square cavity: Application of a new finite volume method

A new finite volume (FV) approach with adaptive upwind convection is used to predict the two-dimensional unsteady flow in a square cavity. The fluid is air and natural convection is induced by differentially heated vertical walls. The formulation is made in terms of the vorticity and the integral velocity (induction) law. Biquadratic interpolation formulae are used to approximate the temperature and vorticity fields over the finite volumes, to which the conservation laws are applied in integral form. Image vorticity is used to enforce the zero-penetration condition at the cavity walls. Unsteady predictions are carried sufficiently forward in time to reach a steady state. Results are presented for a Prandtl number (Pr) of 0-71 and Rayleigh numbers equal to 10³, 10⁴ and 10⁵. Both 11 × 11 and 21 × 21 meshes are used. The steady state predictions are compared with published results obtained using a finite difference (FD) scheme for the same values of Pr and Ra and the same meshes, as well as a numerical bench-mark solution. For the most part the FV predictions are closer to the bench-mark solution than are the FD predictions.     

Threshold reduction of stimulated Brillouin scattering in photonic crystal fiber

A simple configuration for the reduction of stimulated Brillouin scattering threshold in photonic crystal fiber is presented. The threshold reduction is contributed by the bidirectional pumping scheme through the reflection of transmitted Brillouin pump back to the gain medium. The pump recycling scheme has greatly reduced the Brillouin threshold of a 200-m long of photonic crystal fiber from 50 to 30 mW of Brillouin pump power.     

Phase behavior study of poly(N‐tertbutylacrylamide‐co‐acrylamide) in the mixture of water–methanol: The role of polymer–nonsolvent second‐order interactions

The phase behavior of poly(N‐tertbutylacrylamide‐co‐acrylamide) (PNTBAM) in pure water and mixture of water–methanol is studied at different temperatures. The different compositions of PNTBAM are prepared by free‐radical polymerization technique and their phase behavior is studied by turbidimetry. The effects of copolymer and solvent composition on the phase behavior of the copolymers are discussed. It has been suggested that the inhomogenities in polymer chains are responsible for lowering the rate of phase transition by increasing the N‐tertbutylacrylamide (NTBAM) and methanol contents in copolymer and mixture, respectively. For the first time we have revealed that there are second‐order binary interactions in the water–methanol which are dominant in the special range of copolymer composition. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 455–462, 2009     

A fuzzy-stochastic OWA model for robust multi-criteria decision making

All realistic Multi-Criteria Decision Making (MCDM) problems face various kinds of uncertainty. Since the evaluations of alternatives with respect to the criteria are uncertain they will be assumed to have stochastic nature. To obtain the uncertain optimism degree of the decision maker fuzzy linguistic quantifiers will be used. Then a new approach for fuzzy-stochastic modeling of MCDM problems will be introduced by merging the stochastic and fuzzy approaches into the OWA operator. The results of the new approach, entitled FSOWA, give the expected value and the variance of the combined goodness measure for each alternative. Robust decision depends on the combined goodness measures of alternatives and also on the variations of these measures under uncertainty. In order to combine these two characteristics a composite goodness measure will be defined. The theoretical results will be illustrated in a watershed management problem. By using this measure will give more sensitive decisions to the stakeholders whose optimism degrees are different than that of the decision maker. FSOWA can be used for robust decision making on the competitive alternatives under uncertainty.     

Maximizing the minimum completion time on parallel machines

We propose an exact branch-and-bound algorithm for the problem of maximizing the minimum machine completion time on identical parallel machines. The proposed algorithm is based on tight lower and upper bounds as well as an effective symmetry-breaking branching strategy. Computational results performed on a large set of randomly generated instances attest to the efficacy of the proposed algorithm.      

A Review on Machine Learning Approaches for Network Malicious Behavior Detection in Emerging Technologies

Network anomaly detection systems (NADSs) play a significant role in every network defense system as they detect and prevent malicious activities. Therefore, this paper offers an exhaustive overview of different aspects of anomaly-based network intrusion detection systems (NIDSs). Additionally, contemporary malicious activities in network systems and the important properties of intrusion detection systems are discussed as well. The present survey explains important phases of NADSs, such as pre-processing, feature extraction and malicious behavior detection and recognition. In addition, with regard to the detection and recognition phase, recent machine learning approaches including supervised, unsupervised, new deep and ensemble learning techniques have been comprehensively discussed; moreover, some details about currently available benchmark datasets for training and evaluating machine learning techniques are provided by the researchers. In the end, potential challenges together with some future directions for machine learning-based NADSs are specified.