Effect of carbon nanotubes on the thermal conductivity enhancement of synthesized hydroxyapatite filled with water for dental applications: experimental characterization and numerical study

Journal of Thermal Analysis and Calorimetry - The hydroxyapatite is one of the biocompatible and insulating bioceramics, while the carbon nanotube has a high thermal conductivity potential. This...     

Preparation of conductive,flexible and transparent films by in situ deposition of polypyrrole nanoparticles on polyethylene terephthalate

In this study polypyrrole (PPy) nanoparticles were deposited as a thin film on the modified surface of polyethyleneterephthalate (PET) by in situ chemical polymerization in the presence of sodium dodecylsulfate (SDS), sodium dodecylbenzenesulfonate (DBSNa) and mixture of them as the surfactant. The surface of PET was modified by KOH before deposition and was investigated for conductivity and adhesion of PPy nanoparticles to PET. Resulting conductive flexible films were characterized by UV–Vis spectroscopy, fieldemission scanning electron microscopy, contact angle measurements and four-point-probe technique for conductivity. Direct morphological observation (FESEM) and electrical measurements indicated that the morphology, conductivity and the nature of deposited PPy films depend on surfactant, surface modification of PET and monomer concentration. In optimized process condition, uniform conductive films of PPy were obtained with good adhesion to PET.     

In situ crystallization of ZnAl2O4/ZnO nanocomposite on alumina granule for photocatalytic purification of wastewater

Research on Chemical Intermediates - ZnAl2O4/ZnO nanocomposites with different ZnO (20, 30, and 40 mol%) concentrations and coated samples on supports were successfully prepared through...     

Rigorous smart model for predicting dynamic viscosity of Al2O3/water nanofluid

Journal of Thermal Analysis and Calorimetry - Due to the enhanced thermophysical specifications of nanofluids, such as thermal conductivity, these types of fluids are appropriate candidates for...     

A comparative study on the catalytic performance of heme and non‐heme catalysts: Metal porphyrins versus metal Schiff bases

Catalytic activity and oxidative stability of a series of iron and manganese porphyrins with 2‐chlorophenyl, phenyl and 4‐methoxyphenyl at the meso positions and metallosalens (Mn‐ and Fe‐salens) including N,N′‐bis(salicylidene)ethylenediamine, N,N′‐bis(5‐ chlorosalicylidene)ethylenediamine and N,N′‐bis(2,4‐dihydroxysalicylidene)ethylenediamine for the oxidation of olefins with tetra‐n‐butylammonium periodate (TBAP) and tetra‐n‐butyl‐ammonium Oxone (TBAO) have been investigated and compared. Although the metalloporphyrins showed an increased catalytic activity relative to the Schiff base complexes, the former provided no significant catalytic advantage over the latter. Also, a comparable or slightly higher oxidative stability was observed for the Schiff base complexes under the reaction conditions. Furthermore, in spite of large difference between the oxidizing ability of TBAO and TBAP, similar patterns were observed for the order of catalytic activity and oxidative stability of the used heme and non‐heme catalysts. The introduction of a methyl group at the ɑ position of styrene led to an increase in its reactivity, indicating the dominance of electronic effects over the steric ones in these catalytic systems.     

Highly stable copper/carbon dot nanofluid

Copper/carbon dot nanohybrids (Cu/CD NHs) were prepared via a facile precipitation method through a disproportionation reaction. The surface characterization was performed by various techniques such as XRD, FTIR and TEM. Then, water-based nanofluids composed of Cu/CD NHs at 0.1 and 0.5 mass% were prepared, and their thermo-physical properties including thermal conductivity, viscosity, density and specific heat were evaluated at various temperatures. The water-based Cu/CD nanofluid demonstrated to be a potential heat transfer fluid with a high stability. It was found that the thermal conductivity can be enhanced by increasing the nanoparticle concentration and temperature. Almost 1.25-fold increase in thermal conductivity has been achieved by raising the temperature up to 50 °C and at the concentration of 0.5 mass%. The heat capacity was found to increase with increasing concentration. Moreover, by increasing temperature the density and viscosity of the as-prepared nanofluid decreased, whereas the heat capacity showed an increasing trend.     

Microdroplet size prediction in microfluidic systems via artificial neural network modeling for water-in-oil emulsion formulation

In this paper, an experimental study and modeling by artificial neural networks were carried out to predict the generated microdroplet dimensionless size in a microfluidic system in order to formulate a water-in-oil emulsion. The various parameters that affect the size of microdroplets (flow rates, viscosities, surface tensions of both the two phases and the diameter of the microchannel) are studied and further grouped into dimensionless numbers; we used these numbers as input to the neural network and the dimensionless length as output. The better neural network architecture has 10 neurons in the hidden layer with a mean square error of 1.4 10^?6 and a determination’s coefficient near 1 value. The relative importance of inputs on the size of the microdroplets has been determined using the Garson algorithm and the results are in good agreement with other works.     

Development of colorimetric sensor array for discrimination of herbal medicine

Today, traditional systems of medicines (such as herbal distillates) become important resources for providing healthcare benefits. The ability to discriminate among closely similar herbal products is critical to ensure their efficacy. This article proposes a pattern-based recognition approach for the rapid discrimination of herbal distillates using a low-cost and sensitive colorimetric sensor array composed of 25 indicators. The color changes of the sensor exposed to the vapor of the herbal distillates can be monitored easily with an ordinary flatbed scanner. The digital representation of the array response was analyzed with hierarchical clustering analysis (HCA) and principal component analysis (PCA). Using new variable selection strategy, 6 indicators among the 25 employed indicators were selected as discriminant elements of the array. So, a complete discrimination (with 100% accuracy) of 46 herbal distillates was achieved. The proposed sensor represented a better resolution when analytes were placed in an oven at 85 °C for 45 min. This colorimetric sensor array demonstrates excellent potential for quality assurance/control applications of herbal distillates.     

Flow injection-based cloud point extraction of phosalone and ethion in seawater of Chabahar Bay and determination by high-performance liquid chromatography: study of use of carbon nanotube and nanofibers as a column filler in flow system

This study presents an easy and cost-effective flow-based cloud point extraction (CPE) method for determining partial amounts of two organophosphorus pesticides (phosalone and ethion) in seawater by HPLC–UV–Vis. In continues CPE methodology, the effect of the different column packing type such as carbon nanotube, polyacrylonitrile nanofiber and fiberglass on pesticide extraction was investigated. The Triton X-100 was utilized as nonionic surfactant, and moreover, effect of different parameters such as pH, temperature, extraction time, surfactant concentration, type and volume of the eluent solution on the extraction efficiency was optimized. Under optimum conditions, the figures of merit of the method for phosalone and ethion were obtained as: the enrichment factor (172 and 166), line range (0.8–300 and 0.5–300 µg L^?1, R ² = 0.9973 and 0.9982), relative standard deviation in concentration of 200 µg L^?1 (%RSD = %5.4 and %7.99, N = 5) and limit of detection (LOD = 0.24 and 0.14 µg L^?1). The suggested method was successfully used for determination of phosalone and ethion in Chabahar Bay seawaters with satisfactory results.