Application of MCD spectroscopy and TD-DFT to nonplanar core-modified tetrabenzoporphyrins: effect of reduced symmetry on nonplanar porphyrinoids

The optical spectra of a series of core-modified tetrabenzoporphyrins were analyzed to determine the effects of core modification, ligand folding, and partial benzo substitution at the ligand periphery on the electronic structure by using magnetic circular dichroism (MCD) and NMR spectroscopy, X-ray crystallography, cyclic and differential pulse voltammetry, and TD-DFT calculations. Planar 21-carba-, 21-thia-, 21,23-dithia-, and 21-oxa-23-thiatetrabenzo[b,g,l,q]porphyrins reported previously were studied together with the previously unreported 21-oxa- and 21-carba-23-thiatetrabenzo[b,g,l,q]porphyrins. The optical properties of these compounds are compared to those of tetrabenzo[b,g,l,q]-, 5,10,15,20-tetraphenyl-, 5,10,15,20-tetraphenyltetrabenzo[b,g,l,q]-21-thia-, 5,10,15,20-tetraphenyltetrabenzodithia-, 5,10,15,20-tetraphenyldibenzo[g,q]-21,23-dithia-, 5,10,15,20-tetraphenyldibenzo[b,l]-21,23-dithia-, 5,10,15,20-tetraphenyltribenzo[g,q,l]-21-thia-, and 5,10,15,20-tetraphenylbenzo[b]-21-thiaporphyrins. Michl's perimeter model and Gouterman's four-orbital model are used to conceptualize the results and to account for red shifts commonly observed in the spectral bands of nonplanar porphyrinoids.     

Analysis of pesticide residues using the Quick Easy Cheap Effective Rugged and Safe (QuEChERS) pesticide multiresidue method in combination with gas and liquid chromatography and tandem mass spectrometric detection

The Quick Easy Cheap Effective Rugged and Safe multiresidue method (QuEChERS) has been validated for the extraction of 80 pesticides belonging to various chemical classes from various types of representative commodities with low lipid contents. A mixture of 38 pesticides amenable to gas chromatography (GC) were quantitatively recovered from spiked lemon, raisins, wheat flour and cucumber, and determined using gas chromatography-tandem mass spectrometry (GC-MS/MS). An additional mixture of 42 pesticides were recovered from oranges, red wine, red grapes, raisins and wheat flour, using liquid chromatography-tandem mass spectrometry (LC-MS/MS) for determination. The pesticides chosen for this study included many of the most frequently detected ones and/or those that are most often found to violate the maximum residue limit (MRL) in food samples, some compounds that have only recently been introduced, as well as a few other miscellaneous compounds. The method employed involved initial extraction in a water/acetonitrile system, an extraction/partitioning step after the addition of salt, and a cleanup step utilizing dispersive solid-phase extraction (D-SPE); this combination ensured that it was a rapid, simple and cost-effective procedure. The spiking levels for the recovery experiments were 0.005, 0.01, 0.02 and 0.2 mg kg(-1) for GC-MS/MS analyses, and 0.01 and 0.1 mg kg(-1) for LC-MS/MS analyses. Adequate pesticide quantification and identity confirmation were attained, even at the lowest concentration levels, considering the high signal-to-noise ratios, the very good accuracies and precisions, as well as the good matches between the observed ion ratios. Mean recoveries mostly ranged between 70 and 110% (98% on average), and relative standard deviations (RSD) were generally below 10% (4.3% on average). The use of analyte protectants during GC analysis was demonstrated to provide a good alternative to the use of matrix-matched standards to minimize matrix-effect-related errors. Based on these results, the methodology has been proven to be highly efficient and robust and thus suitable for monitoring the MRL compliance of a wide range of commodity/pesticide combinations.     

Spatially Resolved Immobilization of Peptides by Electrochemical Polymerization after Photolytic Cleavage of a Protecting Group

Microstructuring of surfaces: Electrochemical polymerization after removal of a photolabile protecting group (nitrobenzyl group) represents a new method for spatially resolved immobilization of ligands or receptors. Thus, the electropolymerization of 3-hydroxyphenylacetyl peptides such as 1 on electrodes can be controlled by light     

Absorption and emission spectroscopic characterisation of 8-amino-riboflavin

The flavin dye 8-amino-8-demethyl-d-riboflavin (AF) in the solvents water, DMSO, methanol, and chloroform/DMSO was studied by absorption and fluorescence spectroscopy. The first absorption band is red-shifted compared to riboflavin, and blue-shifted compared to roseoflavin (8-dimethylamino-8-demethyl-D-riboflavin). The fluorescence quantum yield of AF in the studied solvents varies between 20% and 50%. The fluorescence lifetimes were found to be in the 2–5 ns range. AF is well soluble in DMSO, weakly soluble in water and methanol, and practically insoluble in chloroform. The limited solubility causes AF aggregation, which was seen in differences between measured absorption spectra and fluorescence excitation spectra. Light scattering in the dye absorption region is discussed and approximate absorption cross-section spectra are determined from the combined measurement of transmission and fluorescence excitation spectra. The photo-stability of AF was studied by prolonged light exposure. The photo-degradation routes of AF are discussed.     

On the complexity of hydromount-models in full vehicle simulation

The influence of the complexity of hydromount-models on the results in full vehicle simulation is studied. In particular, a Kelvin-Voigt model, a linear lever model and a non-linear model are assessed with respect to their predictive capabilities as compared to the necessary parameterization and computation efforts. (© 2011 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Transient heating of a rotating elastic-plastic solid shaft

Based on Tresca's yield criterion and the flow rule associated with it, the transient plasticization in a rotating elastic–plastic solid shaft with temperature dependent yield stress subject to a temperature cycle is studied. Special attention is paid to the residual stresses. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis, characterization, and spectroscopic analysis of antiaromatic benzofused metalloporphyrins

A two-electron oxidation of the Cu(II) (9) and Zn(II) (12) complexes of tetraphenyltetrabenzoporphyrin (TPTBP) results in the formation of stable antiaromatic [(TPTBP)Cu(II)(H(2)O)](2+)?2?[SbF(6)](-) (10) and [(TPTBP)Zn(II)(H(2)O)(2)](2+)?2?[SbF(6)](-) (13) with 16π electrons on the inner ligand perimeter. X-ray structures of the parent TPTBP complexes, the dications, and singly oxidized species [(TPTBP)Cu(II)](?+)[SbF(6)](-) (11) reveal that the use of TPTBP rather than a porphyrin ligand reduces the degree of nonplanarity in the 16π-electron species relative to the parent 18π complex. Significant high-field shifts of the (1)H?NMR signals of the outer ring protons and large positive values in calculations of nucleus-independent chemical shifts on the central cavity of the porphyrin ring provide unambiguous evidence for the antiaromatic character of the 16π Zn(II) species. A combination of magnetic circular dichroism spectroscopic studies and TD-DFT calculations on both the Zn(II) and Cu(II) species demonstrates that the main electronic bands of the dicationic species can be readily assigned by using Michl's 4N perimeter model. Femtosecond transient absorption studies clearly demonstrated that the number of π electrons on the inner ligand perimeter and the configuration of the central metal ion play a critical role in the excited-state relaxation dynamics. Redox potentials for conversion between the 16π, 17π, and 18π systems were measured by cyclic voltammetry in dichloromethane and benzonitrile, and UV/Vis spectra of each oxidation/reduction product were monitored by thin-layer spectroelectrochemistry.     

Intermolecular oxonium ylide mediated synthesis of medium-sized oxacycles

Detailed in this account are our efforts toward efficient oxacycle syntheses. Two complementary approaches are discussed, with both employing chemoselective allyl ether activation and rearrangement as the key step. Vinyl substituted oxiranes and oxetanes provide a single step access to dihydropyrans and tetrahydrooxepines. Oxiranes proved to be poor substrates, while oxetanes were slightly better. An alternative approach using substituted allyl ethers proved successful and addressed the limitations encountered in the ring expansions.     

Fourteen-electron ring model and the anomalous magnetic circular dichroism of meso-triarylsubporphyrins

The MCD spectra of meso-triarylsubporphyrins show a sign anomaly which is correlated with the acceptor properties of the aryl substituent. From the spectra, magnetic moments of the excited states are determined. In the context of a simplified orbital model, the sign change is attributed to the quenching of the magnetic moment of the LUMO by acceptor orbitals of the substituent. The actual calculation of this moment presents a major challenge to computational methods. It is shown that wave function techniques based on CASSCF underestimate the covalency effects that are responsible for the quenching. In contrast, a CI method based on DFT orbitals yields excellent results, which fully support the orbital model.