Characterisation of anodic oxide films on zirconium formed in sulphuric acid: XPS and corrosion resistance investigations

Present work describes investigations of a two-step process consisting of galvanostatic anodising in a 1 M H₂SO₄ solution at 100 mA cm⁻² up to the limiting voltages of 20, 60, 80, 100 and 120 V, directly after which potentiostatic regime was employed and the current was allowed to drop. The total treatment time (5 min) was held constant for all samples. The treatment was carried out to improve the corrosion resistance of zirconium in physiological conditions, which was determined by electrochemical evaluation in Ringer’s solution. XPS studies revealed that after anodising sulphur was incorporated into the oxide film in the form of sulphated zirconia. The maximum content of sulphate in the oxide layer was observed after anodising at 80 V. Anodising at higher voltages resulted in formation of coatings with decreasing amount of sulphur. It was found that there is a strong correlation between the sulphur content in the oxide layers and the measured corrosion current density. On the other hand, the pitting corrosion resistance seemed to be unaffected by the presence of S and it was improving with the increasing limiting voltage of the treatment.

     

Mechanochemical synthesis and thermal stability of phases in the Y2O3–Yb2O3 system

Substitutional, continuous solid solution of the general formula Y_2–xYb_xO₃ was obtained from the mixture of Y₂O₃ and Yb₂O₃ oxides, for the first time by the mechanochemical method in a high-energy ball milling. The monophasic samples of nanocrystalline solid solution for x?>?0.00 and x?<?2.00 were examined by the methods: XRD, DTA, SEM, IR and UV–Vis–DR. As follows from the results, the solid solution crystallizes in cubic system and is isostructural with Y₂O₃ and Yb₂O₃. The solution is stable in the air atmosphere up to at least 900°C, and its decomposition temperature decreases with the increase in x, that is, with decreasing number of Yb³⁺ ions replacing Y³⁺ ions in the crystal lattice of Y₂O₃. The energy band gap estimated for the solid solution varies from?~?5.30 eV for x?=?0.50 to?~?4.90 eV for x?=?1.50, which means that it is an insulator.

     

Analysis of curing reaction of liquid-crystalline epoxy compositions by using temperature-modulated DSC TOPEM®

Journal of Thermal Analysis and Calorimetry - The curing behaviour of the composition of a liquid-crystalline diepoxy monomer (LCEM) with the central triaromatic mesogenic group was studied using...     

Measurements in Situ and Spectral Analysis of Wind Flow Effects on Overhead Transmission Lines

In the paper an important issue of vibrations of the transmission line in real conditions was analyzed. Such research was carried out by the authors of this paper taking into account the cross-section of the cable being in use on thetransmission line. Analysis was performed for the modern ACSR high voltage transmission line with span of 213.0 m. The purpose of the investigation was to analyze the vibrations of the power transmission line in the natural environmentand compare with the results obtained in the numerical simulations. Analysis was performed for natural and wind excited vibrations. The numerical model was made using the Spectral Element Method. In the spectral model, for variousparameters of stiffness, damping and tension force, the system response was checked and compared with the results of the accelerations obtained in the situ measurements. A frequency response functions (FRF) were calculated. Thecredibility of the model was assessed through a validation process carried out by comparing graphical plots of FRF functions and numerical values expressing differences in acceleration amplitude (MSG), phase angle differences (PSG) and differences in acceleration and phase angle total (CSG) values. Particular attention was paid to the hysteretic damping analysis. Sensitivity of the wave number was performed for changing of the tension force and section area of thecable. The next aspect constituting the purpose of this paper was to present the wide possibilities of modelling and simulation of slender conductors using the Spectral Element Method. The obtained results show very good accuracy in the range of both experimental measurements as well as simulation analysis. The paper emphasizes the ease with which the sensitivity of the conductor and its response to changes in density of spectral mesh division, cable cross-section,tensile strength or material damping can be studied.     

Analysis of carbenoxolone by ultra‐high‐performance liquid chromatography tandem mass spectrometry in mouse brain and blood after systemic administration

Carbenoxolone is a derivative of glycyrrhetinic acid found in the root of Glycyrrhiza glabra, colloquially known as licorice. It has been used as a treatment for peptic and oral ulcers. In recent years, carbenoxolone has been utilized in basic research for its ability to block gap junctional communication. Better understanding the distribution of carbenoxolone after systemic administration can lead to a better understanding of its potential sites of action. Presented is an ultra high‐performance liquid chromatography tandem mass spectrometer (UHPLC–MS/MS) method for the identification and quantification of carbenoxolone in mouse blood and brain tissue. Twenty mice were injected intraperitoneally with 25 mg/kg carbenoxolone and brain tissue and blood were collected for analysis. Blood concentrations (mean ± SD) at 15, 30, 60 and 120 min were determined to be (n = 5) 5394 ± 778, 2636 ± 836, 1564 ± 541 and 846 ± 252 ng/mL, respectively. Brain concentrations (mean ± SD) at 15, 30, 60 and 120 mins were determined to be (n = 5) 171 ± 62, 102 ± 35, 55 ± 10 and 27 ± 9 ng/g, respectively. The analysis of these specimens at the four different time points resulted in blood and brain half‐lives in mice of ~43 and 41 min, respectively. The UHPLC–MS/MS method was determined to be sensitive and robust for quantification of carbenoxolone.     

Impact of the ΔPhe configuration on the Boc-Gly-ΔPhe-NHMe conformation: experiment and theory

Conformational propensities of N-t-butoxycarbonyl-glycine-(E/Z)-dehydrophenylalanine N′-methylamides (Boc-Gly-(E/Z)-ΔPhe-NHMe) in chloroform were investigated by NMR and IR techniques. The low-temperature crystal structure of the E isomer was determined by single crystal X-ray diffraction and the experimental data were elaborated by theoretical calculations using DFT (B3LYP, M06-2X) and MP2 approaches. The β-turn tendencies for both isomers were determined in the gas phase and in the presence of solvent. The obtained results reveal that the configuration of ΔPhe residue significantly affects the conformations of the studied dehydropeptides. The tendency to adopt β-turn conformations is significantly lower for the E isomer (Boc-Gly-(E)-ΔPhe-NHMe), both in gas phase and in chloroform solution.

     

C, N CPMAS NMR and GIAO DFT calculations of stereoisomeric oxindole alkaloids from Cat's Claw (Uncaria tomentosa)

Oxindole alkaloids, isolated from the bark of Uncaria tomentosa [Willd. ex Schult.] Rubiaceae, are considered to be responsible for the biological activity of this herb. Five pentacyclic and two tetracyclic alkaloids were studied by solid-state NMR and theoretical GIAO DFT methods. The ¹³C and ¹⁵N CPMAS NMR spectra were recorded for mitraphylline, isomitraphylline, pteropodine (uncarine C), isopteropodine (uncarine E), speciophylline (uncarine D), rhynchophylline and isorhynchophylline. Theoretical GIAO DFT calculations of shielding constants provide arguments for identification of asymmetric centers and proper assignment of NMR spectra. These alkaloids are 7R/7S and 20R/20S stereoisomeric pairs. Based on the ¹³C CP MAS chemical shifts the 7S alkaloids (δ C3 70–71 ppm) can be easily and conveniently distinguished from 7R (δC3 74.5–74.9 ppm), also 20R (δC20 41.3–41.7 ppm) from the 20S (δC20 36.3–38.3 ppm). The epiallo-type isomer (3R, 20S) of speciophylline is characterized by a larger ¹⁵N MAS chemical shift of N4 (64.6 ppm) than the allo-type (3S, 20S) of isopteropodine (δN4 53.3 ppm). ¹⁵N MAS chemical shifts of N1–H in pentacyclic alkaloids are within 131.9–140.4 ppm.