Fabrication of hollow titania microspheres with tailored shell thickness

Submicron hollow spheres are an interesting class of materials that receive significant attention nowadays. Closed and mechanically robust homogeneous hollow titania microspheres with as much shell thickness as 130 nm were fabricated by coating polystyrene beads with titania nanoparticles using sol–gel chemistry and subsequently removing the core either via heating or a chemical dissolution process. The thickness of the titania shell deposited on polystyrene core was finely tuned between 100 and 130 nm by varying the concentration of titania precursor, i.e., Ti(OEt)₄ salt from 0.5 to 2 mM during the coating process. The obtained hybrid core–shell particles and hollow microspheres were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and thermo-gravimetric analysis. The approach employed is well suited to the preparation of titania-coated polystyrene hybrid particles and hollow titania spheres, which can find their applications as novel building blocks with unique optical properties for fabrication of advanced materials, catalyst, and drug delivery system.     

Stability of self-assembled monolayers on titanium and gold

Methyl- and hydroxyl-terminated phosphonic acid self-assembled monolayers (SAMs) were coated on Ti from aqueous solution. Dodecyl phosphate and dodecyltrichlorosilane SAMs were also coated on Ti using solution-phase deposition. The stability of SAMs on Ti was investigated in Tris-buffered saline (TBS) at 37 degrees C using X-ray photoelectron spectroscopy, contact angle goniometry, and atomic force microscopy. For comparison purposes, a hydroxyl-terminated thiol SAM was coated on Au, and its stability was also investigated under similar conditions. In TBS, a significant proportion of phosphonic acid or phosphate molecules were desorbed from the Ti surface within 1 day, while the trichlorosilane SAM on Ti or thiol SAM on Au was stable for up to 7 days under similar conditions. The stability of hydroxyl-terminated phosphonic acid SAM coated Ti and thiol SAM coated Au was investigated in ambient air and ultraviolet (UV) light. In ambient air, the phosphonic acid SAM on Ti was stable for up to 14 days, while the thiol SAM on Au was not stable for 1 day. Under UV-radiation exposure, the alkyl chains of the phosphonic acid SAM were decomposed, leaving only the phosphonate groups on the Ti surface after 12 h. Under similar conditions, decomposition of alkyl chains of the thiol SAM was observed on the Au surface accompanied by oxidation of thiolates.     

Synthesis of novel tantalum oxide sub-micrometer hollow spheres with tailored shell thickness

Sub-micrometer-sized hollow tantalum oxide (Ta2O5) spheres with tunable shell thickness and void size have been fabricated exploiting beta-diketone-functionalized polystyrene (PS) beads as sacrificial templates in a sol-gel process. First, a controlled precipitation of Ta2O5 nanoparticles was carried out on the template surface by hydrolyzing tantalum ethoxide (Ta(OEt)5) at room temperature, and subsequently, the polymer core was removed either via chemical treatment with toluene or calcination at 650 degrees C. The thickness of the tantala shell precipitated on the PS core during the coating process was tuned between 100 and 142 nm by varying the concentration of tantala precursor in the reaction media. The obtained Ta2O5-coated PS particles and hollow microspheres were characterized by scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray diffraction, and thermogravimetric analysis. Due to the unique optical and dielectric properties, these nanostructured materials are envisaged to be used in applications such as novel building blocks for the fabrication of advanced materials, surface coatings, catalysts, and drug delivery systems.     

Nature and properties of ultrathin nanocrystalline gold films formed at the organic-aqueous interface

Ultrathin nanocrystalline films of gold formed at different temperatures at the organic-aqueous interface have been investigated by X-ray diffraction, electron microscopy, atomic force microscopy, and electronic spectroscopy. The films are smooth and continuous over relatively large length scales and are generally approximately 100 nm thick. The size of the nanocrystals is sensitive to the reaction temperature, which also determines whether the film is metallic or an activated conductor. The surface plasmon band of gold is highly red-shifted in the films. Alkanethiols perturb the structure of the films, with the magnitude of the effect depending on the chain length. Accordingly, the position of the plasmon band and the electrical resistance of the films are affected by interaction with alkanethiols; the plasmon band approaches that of isolated nanocrystals in the presence of long-chain thiols.     

Zirconium(IV) Thorium(IV) and Dioxouranium(VI) Complexes of Salicylidene o-Aminobenzothiol

Salicylidene-o-aminobenzothiol and its 5-chloro and 5-bromo derivatives, dibasic tridentate Schiff bases, dervied from the condensation of o-aminothiol and Salicylaldehyde, 5-chloro salicylaldehyde and 5-bromo salicylaldehyde, were used for coordination with Zr(IV), Th(IV) and UO₂(VI) metal inos. The I:I (metal-ligand) stoichiometry of these complexes is shown by elemental analysis and conductometric titrations. Molecular structure of these complexes are proved by Infra-red spectroscopy and thermogravimetric analysis. Magnetic susceptibility measurements of Zr(IV), Th(IV) and UO₂(VI) complexes show their diamagnetic and octahedral geometry. Results show that all the complexes have solvent molecules in coordination with metal ion.     

Curing and thermal behaviour of a flame retardant cycloaliphatic epoxy resin based on phosphorus containing poly(amide–imide)s

The curing behaviour of 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate was investigated by the dynamic differential scanning calorimetry (DSC) using phosphorus-containing poly(amide–imide)s (PAIs) having free amine groups, 4,4′-diaminodiphenylmethane (PM) and p-phenylenediamine (PA), in the ratio of 1:1. The PAIs were prepared by co-polymerization of diimide–diacid (DIDA) and phosphorus-containing triamines having phenylene moiety. l-Tryptophan and pyromellitic anhydride were used to synthesize DIDA. Triamines used in the synthesis PAIs were tris(3-aminophenyl) phosphine (TAP), tris(3-aminophenyl) phosphine oxide (TAPO) and bis(3-aminophenyl) aminotolyl phosphine (BAP). TAP-, TAPO- and BAP-containing PAIs were designated as PTAP, PTAPO and PBAP, respectively. These PAIs with free amine groups were characterized by FTIR, ¹H NMR, ¹³C NMR spectroscopic techniques and elemental analysis. The mixture of PAIs and PM or/and PA in the ratios of 0:1, 1:0 and 0.5:0.5 was used for investigation. DSC was used to study the curing of epoxy by recording the DSC scans at heating rates of 10 °C min^?1. Thermal stability of epoxy resin cured isothermally was evaluated by recording thermo gravimetric traces in nitrogen atmosphere at the heating rate of 20 °C min^?1. All samples are highly stable, and the 10 % mass loss found was in the range of 335–520 °C. The percent char yield was highest in case of resin sample E/PM/PTAPO. The flame-retardant properties of cured epoxy resins were investigated by the limiting oxygen index test (LOI) and UL94 test. When phosphorus was incorporated in epoxy resin, the epoxy resin system met the UL94 V-0 classification and the LOI reached at 37.8, because of nitrogen–phosphorus synergistic effect.     

Biligand metal chelates of 1,10-phenanthroline and several salicyclic acid derivatives in solution

Summary Mixed ligand complexes of copper(II), zinc(II), nickel(II) and cobalt(II) ions involving 1,10-phenanthroline (phen) as primary and 3,5-dinitrosalicylic acid (dnsa), 5-nitrosalicylic acid (nsa), 5-chlorosalicylic acid (csa) and 3,5-dibromosalicylic acid (dbsa) as secondary ligands in solution have been investigated potentiometrically [25°, µ = 0.1 M [NaClO₄], medium 50% v: v aqueous ethanol]. The stability order of mixed ligand complexes with respect to the metal ions obeys the natural order: cobalt(II) < nickel(II) < copper(II) > zinc(II). The stabilities of the heterometal chelates have been compared with the corresponding homometal chelates of the secondary ligands and have been interpreted in terms of metal-ligand effects and coulombic interactions between various ligand anion species present.     

Hydroxymethylation and cyanoethylation of nitroimidazoles

A series of nitroimidazoles were subjected to hydroxymethylations under a variety of conditions. Hydroxymethylation of 1-(2-hydroxyethyl), 1-(2-acetoxyethyl), and 1-(2-chloroethyl) substituted 5-nitroimidazoles with paraformaldehyde in dimethyl sulfoxide yielded the respective 2-hydroxymethyl analogs (5–7). However, attempts to hydroxymethylate 1-(2-hydroxyethyl), 1-(2-acetoxyethyl), 1-(2-cyanoethyl) substituted 4-nitroimidazoles and 1-(2-hydroxyethyl)-2-nitroimidazole were unsuccessful. Treatment of 1-(2-acetoxyethyl)-5-nitro-2-imidazolecar-baldehyde(10) with hydroxylamine-O-sulfonic acid afforded a mixture of corresponding 2-carbonitrile (12) and 2-(N-hydroxy)carboximidamide (13). Hydrolysis of 10 with ethanolic hydrochloric acid yielded 8-ethoxy-5,6-dihydro-3-nitro-8H-imidazo[2,1-c] [1,4]oxazine (11) which, on subsequent reaction with hydroxylamine-O-sulfonic acid, afforded 1-(2-hydroxyethyl)-5-nitroimidazole-2-(N-hydroxy)carboximidamide (15). Reaction of 4(5)-nitroimidazole with chloropropionitrile produced a mixture of the isomeric 1-(2-cyanoethyl) substituted 4- and 5-nitroimidazoles. Treatment of 2,4(5)-dinitroímidazole with chloropropionitrile afforded a mixture of 4(5)-chloro-5(4)-nitroimidazole and 1-(2-cyanoethyl)-4-nitro-5-chloroimidazoIe. Reaction of nitroimidazoles with acrylonitrile in the presence of Triton B yielded the corresponding 1-(2-cyanoethyl) substituted derivatives.     

Use of a Water-in-Oil Microemulsion as Mobile Phase in Complexation TLC of Amino Acids on Silica Layers Impregnated with Metal Cations

JPC – Journal of Planar Chromatography – Modern TLC - A water-in-oil microemulsion has been used for the first time as a mobile phase in thin-layer chromatography of amino acids. A new...     

Study on curing of novolac epoxy resin

The optimization of proportions of novolac epoxy resin, Dobeckot E4 and polyamide hardener, EH411 has been established by DSC and the data indicates that resin-polyamide, 100∶40 and 100∶50, appear to be optimum where ‘extent of cure’ is maximum. The kinetic parameters for these formulations have been evaluated using isothermal and dynamic modes by employing DSC. The rate constants have been evaluated for curing process of these formulations using isothermal DSC mode in the temperature range of 70°–90°C. These have also been predicted at 20°±1°C (room temperature) by extrapolating the data obtained at elevated temperatures. A comparison of the predicted values with the experimental values shows that there is a good agreement between them.