Estimation of partially specified spatial panel data models with random-effects

In this article, we study estimation of a partially specified spatial panel data linear regression with random-effects. Under the conditions of exogenous spatial weighting matrix and exogenous regressors, we give an instrumental variable estimation. Under certain sufficient assumptions, we show that the proposed estimator for the finite dimensional parameter is root-N consistent and asymptotically normally distributed and the proposed estimator for the unknown function is consistent and asymptotically distributed. Consistent estimators for the asymptotic variance-covariance matrices of both the parametric and unknown components are provided. The Monte Carlo simulation results verify our theory and suggest that the approach has some practical value.     

选择性控制的配体工程在金团簇催化中的作用

金团簇表面的硫醇配体影响着团簇的催化性质,尤其是选择性.我们采用在真空条件下通过程序升温的方法逐渐剥除金团簇表面的硫醇配体来制备催化剂,利用透射电镜,红外光谱对催化剂结构进行表征,以硝基化合物催化还原反应为模型反应,详细研究了配体对催化活性和选择性的影响.研究发现因配体被剥离导致底物更容易接近团簇表面,最终使得反应转换率大幅升高.实验结果还表明金团簇催化剂催化不同官能团取代的底物显示了良好的官能团兼容性,有吸电子效应的硫配体使团簇表面带正电荷,进而避免苯胺衍生物的产生.     

加强实验教学过程管理促进实验教学目标达成

实验教学目标的达成依赖于严格的实验过程的科学管理。本文介绍了大连理工大学基础化学实验中心通过《化学实验指导手册》的编制和严格执行,培养学生的实验安全环保意识,加强对实验过程的指导。将实验各环节纳入考核范畴,目的在于着力培养学生良好的实验习惯,规范实验报告撰写和提高学生的创新思维能力,从而有效地监控和保证了实验教学质量。     

金属铜配合物的合成、晶体结构、抗癌活性及与牛血清白蛋白的相互作用

合成了一个含有席夫碱配体的四配位的铜配合物,通过元素分析、红外光谱对其进行表征并通过X射线单晶衍射仪测试它的结构,属于单斜晶系。此外,通过MTT法(MTT为3-(4,5-二甲基噻唑-2)-2,5-二苯基四氮唑溴盐)测试了配合物对宫颈癌细胞、胃癌细胞、肝癌细胞和乳腺癌细胞的细胞毒性。结果表明铜配合物对4种肿瘤细胞的活性比顺铂高。通过荧光光谱法研究了配合物与牛血清白蛋白的相互作用,荧光光谱表明配合物与血清结合过程中发生了静态猝灭,并且计算了结合常数、结合位点数、结合距离和热力学常数ΔH,ΔS和ΔG。     

基于水滑石的Zn-Cr-Cu复合金属氧化物的制备及其对罗丹明B的光催化降解性能

采用共沉淀法一步组装获得席夫碱铜(Ⅱ)插层的Zn-Cr水滑石(ZnCr-SBCu-LDHs),再经500℃高温焙烧制得新颖的Zn-CrCu复合金属氧化物(ZnCr-SBCu-LDO)光催化材料。通过X射线粉末衍射(XRD)、紫外-可见漫反射图谱(UV-Vis DRS)、扫描电子显微镜(SEM)、电感耦合等离子体原子发射光谱(ICP-AES)对催化材料的结构和性质进行分析表征。以较难被水滑石吸附的阳离子型染料罗丹明B(RhB)作为模型,研究材料的光催化活性,考察材料用量、RhB溶液的初始pH值、温度以及H_2O_2初始浓度等对光催化活性的影响。结果发现:ZnCr-SBCu-LDO具有优异的光催化活性,在初始pH值为7.40、温度为25℃以及H_2O_2初始浓度10 mmol·L~(-1)的条件下,光照4 h后,1 g·L~(-1)的催化材料对5 mg·L~(-1)的RhB溶液的降解效率可达98.68%。此外,进一步对催化剂的再生能力进行了研究,并初步探讨了光催化降解的机理。     

硫掺杂二氧化钛/碳化钛复合材料的制备及储锂性能

通过二维层状Ti_3C_2的原位水热氧化和气相硫化反应,制备了硫掺杂二氧化钛/碳化钛(S-TiO_2/Ti_3C_2)复合材料,并用于电化学储锂。结果表明,二氧化钛纳米颗粒原位生长在碳化钛片层上,且硫成功掺杂到二氧化钛中。这种S-TiO_2/Ti_3C_2复合结构作为锂离子电池的负极材料,表现出较好的电化学性能。在0.2 A/g的电流密度下循环100圈后,放电比容量稳定在288 m A·h/g,远高于纯Ti_3C_2和TiO_2/Ti_3C_2电极的放电比容量。S-TiO_2/Ti_3C_2复合材料表现出的较高比容量和良好的循环性能,主要归因于复合材料的特殊纳米结构优势:二氧化钛原位生长在碳化钛上,使复合材料具有稳定良好的接触界面,能够促进电子的快速转移,同时可以有效避免循环过程中两种组分的分离;硫在二氧化钛中的掺杂可以提高二氧化钛的导电性,并引入缺陷,提高反应活性。此研究工作为二维材料的原位转化及复合提供了新的思路和研究方法。     

片状煤焦颗粒CO2气化过程中形态及结构演变特性研究

采用高温热台显微镜观测了片状煤焦颗粒CO₂气化过程中的形态演变,并通过拉曼光谱分析了气化半焦的碳微晶结构,同时研究了气化温度（1000-1200℃）和煤焦初始当量直径（1.00-1.60 mm）对其CO₂气化过程中的形态及结构演变的影响规律。结果表明,与反应前期相比,反应后期的颗粒收缩（面积、体积、当量直径）更加剧烈。在所研究的气化温度范围内,随着气化温度的升高,煤焦颗粒的面积收缩率和体积收缩率逐渐减小。煤焦初始粒径显著影响颗粒收缩,1100℃气化温度下,颗粒的收缩趋势在初始粒径1.30 mm处出现转折。煤焦气化过程中碳消耗主导着表观密度的变化,在所研究的温度和粒径范围内,当碳转化率达到80%时,表观密度比线性减小到0.4以下。在相同气化温度下,随着碳转化率的增加,煤焦的石墨化程度先减小后增加,无定形碳含量先增加再减小。     

Simultaneous Modulation of Magnetic and Dielectric Transition via Spin‐Crossover‐Tuned Spin Arrangement and Charge Distribution

Magnetic and dielectric properties have been tuned simultaneously by external stimuli with rapid and sensitive response, which is crucial to monitor the magnetic state via capacitive measurement. Herein, positive charged Fe^II ions were linked via negative charged [(Tp)Fe^III(CN)₃]^? (Tp=hydrotris(pyrazolyl)borate) units to form a neutral chain. The spin‐crossover (SCO) on Fe^II sites could be sensitively triggered via thermal treatment, light irradiation, and pressure. SCO switched the spin state of the Fe^II ions and antiferromagnetic interactions between Fe^III and Fe^II ions, resulting in significant change in magnetization. Moreover, SCO induced rotation of negative charged [(Tp)Fe^III(CN)₃]^? units, generating dielectric anomaly due to geometric change of charges distribution. This work provides a rational way to manipulate simultaneous variations in magnetic and dielectric properties utilizing SCO as an actuator to tune spin arrangement, magnetic coupling, and charge distribution.     

Catalytic Asymmetric [2+3] Cyclizations of Azlactones with Azonaphthalenes

The first catalytic asymmetric [2+3] cyclization of azlactones with azonaphthalenes has been established. This strategy allowed the synthesis of a variety of chiral isatin derivatives in generally good yields and excellent enantioselectivities (up to 99 % yield, 98 % ee). The developed reaction has not only established a catalytic enantioselective [2+3] cyclization using azlactones as two‐carbon building blocks, but also enriches the chemistry of catalytic asymmetric cyclizations of azonaphthalenes. In addition, this protocol will provide a useful method for constructing enantioenriched 3,3′‐disubstituted isatin‐type frameworks.     

Transient and Persistent Room‐Temperature Mechanoluminescence from a White‐Light‐Emitting AIEgen with Tricolor Emission Switching Triggered by Light

Persistent luminescence from purely organic materials is basically triggered by light and electricity, which largely confines its practical applications. A purely organic AIEgen exhibits not only persistent photoluminescence, but also transient and persistent room‐temperature mechanoluminescence. By simply turning on and off a UV lamp, tricolor emission switching between blue, white, and yellow was achieved. The data from single‐crystal structure analysis and theoretical calculation suggest that mechanism of the observed persistent mechanoluminescence (pML) is correlated with the strong spin–orbit coupling of the bromine atom, as well as the formation of H‐aggregates and restriction of intramolecular motions in noncentrosymmetric crystal structure. These results outline a fundamental principle for the development of new pML materials, providing an important step forward in expanding the application scope of persistent luminescence.