Study of conical columns with 10 degrees opening angle for preparative liquid chromatography

The efficiency and sample capacity of conical liquid chromatographic columns with 10 degrees opening angle were studied at different ratio of cross section areas of inlet to outlet (A(in)/A(out)) and column dimension. As the A(in)/A(out) ratio changed from 4 to 2.25, the reduced plate height (h) was reduced and the h value decreased 12% when the column dimension was scaled up proportionally because of relatively smaller dead volume on both end of the column. Compared to cylindrical columns having corresponding lengths and volumes, the conical columns with 10 degrees opening angle were superior in column efficiency, resolution and the maximum peak concentration at column outlet; the loadability of conical column was improved 30-40% on injection volume and 50-60% on sample mass, respectively, over cylindrical columns.     

温压炸药爆炸性能实验研究

为研究温压炸药的爆炸特性,将25 g温压炸药在5.8 L的密闭爆炸罐中引爆,测试了真空和空气环境下的爆炸压力和爆炸温度,并通过气相色谱分析了爆炸后的气体产物。实验结果表明,温压炸药在空气环境下的平衡压力和平衡温度明显高于真空环境,并且空气中的氧气参与了炸药中铝粉的氧化反应,说明温压炸药在空气环境下存在后燃效应。     

浅层目标亚波长声学成像新方法

正声学成像是一种用来检测物质结构和成分的重要方法,其分辨率受限于衍射极限(diffraction limit)。为了获取更高的分辨率,往往需要测量高空间频率的声倏逝波(acoustic evanescent wave)。倏逝波带有物体的细节特征信息,离开天然材料物体后的衰减特性满足指数关系。近年来,科学家利用结构声学超常材料(structured acoustic metamaterials,AMM)克服衍射极限,通过增强倏逝波     

Incorporating Zn2SnO4 Quantum Dots and Aggregates for Enhanced Performance in Dye‐Sensitized ZnO Solar Cells

The performance of dye‐sensitized ZnO solar cells was improved by a facile surface‐treatment approach through chemical‐bath deposition. After the surface treatment, the quantum dots of Zn₂SnO₄ were deposited onto ZnO nanoparticles accompanied by the aggregations of Zn₂SnO₄ nanoparticles. The ZnO film displayed a better resistance to acidic dye solution on account of the deposited Zn₂SnO₄ nanoparticles. Meanwhile, the open‐circuit photovoltage was greatly enhanced, which can be ascribed to the increased conduction‐band edge of ZnO and inhibited interfacial charge recombination. Although the deposition of Zn₂SnO₄ decreased the adsorption amounts of N719 dye, the aggregates of Zn₂SnO₄ with a size of 350–450 nm acted as the effective light‐scattering layer, thereby resulting in an improved short‐circuit photocurrent. By co‐sensitizing 10 μm‐thick ZnO film with N719 and D131 dyes, a top efficiency of 4.38 % was achieved under the illumination of one sun (AM 1.5, 100 mW cm^?2).     

面层混凝土对跑道内爆毁伤影响的仿真研究

 采用考虑混凝土拉伸破坏的TCK失效模型,运用AUTODYN软件对跑道内爆毁伤进行了数值模拟。研究了炸点置于面层混凝土底部时,不同装药量和不同面层混凝土厚度对爆破漏斗坑参数的影响规律。结果表明：数值模拟结果较好地反映了混凝土因拉伸损伤引起的破裂和抛掷漏斗现象。基于数值模拟得到的漏斗坑参数值,建立了漏斗坑半径、空腔半径与面层厚度的无量纲表达式,计算得到的漏斗坑参数值得到了实验验证。     

发光二极管诱导荧光检测器*

发光二极管诱导荧光检测器（LED-IF）是近十年来发展起来的一种微型化荧光检测器,在流动注射、毛细管液相色谱、毛细管电泳及芯片电泳等微流动分析系统中具有广泛的应用。本文讨论了LED-IF的4种光学结构,并对其主要器件,包括光源、滤光片、透镜、光纤、光电检测器以及检测池作了详细讨论,还介绍了LED-IF与其它技术的联用及其在生物、医药和环境样品检测中的应用,对未来的发展趋势作了展望。     

不锈钢宽口径填充毛细管液相色谱柱的制备及评价

设计了一种零死体积的柱尾连接方式和一种能使匀浆填料均匀进入色谱柱管内的锥形储料池。详述了以反相 ＯＤＳ为固定相,制备高效稳定的不锈钢宽口径（０．８ ｍｍＩ．Ｄ．）填充毛细管液相色谱柱的方法。系统地考察了填装方向、加压溶剂、匀浆溶剂、匀浆浓度和填装压力等不同因素对柱效的影响。在４０ＭＰａ压强和优化条件下,可重复制得柱效达理论塔板数为７．５×１０４／ｍ。对所测试的样品,色谱峰不对称因子为１．０３～１．１０。     

色谱与色谱/质谱法相结合分析热裂解汽油C9馏分

采用毛细管气相色谱-氢火焰离子化检测器（CGC-FID）和气相色谱-质谱法(GC/MS)分析了热裂解汽油C9 馏分的组成。实验使用PONA毛细管气相色谱柱(100 m×0.25 mm i.d.×0.5 μm),根据烃类化合物在PONA柱上的保留规律,以正构烷烃标样保留值作为碳数分布依据,定量分析了裂解汽油C9 馏分中烃类化合物的碳数分布和单体烃含量;用GC/MS联用技术和CGC保留值定性法相结合对裂解汽油C9 馏分中相对含量大于0.2%的39种化合物进行了定性。     

超静定梁变形计算的积分法

从线性化弯矩和曲率关系出发,将超静定梁多余反力的弯矩叠加到梁截面弯 矩中去,经两次积分得到了包括积分常数和多余反力的分段转角方程和挠曲线方程,利用边界 条件和连续条件确定积分常数和多余反力,进而确定了转角方程和挠曲线方程.文中工作扩大 了积分法的应用范围. 教学实践表明,用积分法解超静定梁的变形能够起到帮助学生学习和 掌握固体力学的边值问题解题思想的作用.     

加压溶剂萃取-气相色谱法测定荞麦中残留的有机氯农药

用所研制的24位全自动加压溶剂萃取仪(APLE),以丙酮-正己烷(体积比为1∶1)为溶剂,在100 ℃和10 MPa条件下,对荞麦样品中残留的7种有机氯农药进行了萃取,并通过气相色谱对萃取液进行定量分析。萃取的绝对回收率为68%～126%,相对标准偏差为1.2% ～14.7%,检测下限为0.051～0.18 ng/g。与索氏提取法对比,相对提取回收率为116%～148%,表明萃取收率高于索氏提取法。