Partial molal heat capacities of aqueous tetraalkylammonium bromides as functions of temperature

Enthalpies of solution have been measured from 5 to 85°C for aqueous tetraethyl- and tetrapropylammonium bromides, and the integral heat method is employed to evaluate for these electrolytes over a wide temperature range. Data taken from the literature have been used to evaluate for aqueous Bu₄NBr over a similar temperature range. These data, along with similar data for Me₄NBr, previously reported, have been used to evaluate absolute ionic heat capacities. While the absolute values agree only qualitatively with two other methods of division, the temperature dependences of the three methods essentially agree up to 65°C. Heat capacities due to structural effects on the solvent, obtained by subtracting the inherent heat capacities of the ions, are extraordinarily positive for all four tetraalkylammonium ions and have negative temperature coefficients, indicating that all four ions, including the tetramethylammonium ion, are structure-making ions.     

Copper precipitation from sulfate solutions with calcium carbonates

Mechanism of interaction of copper sulfate with natural calcium carbonates, responsible for low residual copper concentrations in solutions and for the behavior of open and closed systems in storage is considered.     

Electronic properties of polyoxometalates: a DFT study of alpha/beta-[XM(12)O(40)](n-) relative stability (M=W, Mo and X a main group element)

Keggin heteropolyanions [XM(12)O(40)](n-) have various isomeric structures, alpha and beta being the most common. Conventionally, the alpha structure appears to be the most stable, but calculations carried out at the DFT level for X = P(V), Si(IV), Al(III), As(V), Ge(IV), and Ga(III) and M = W(VI) and Mo(VI) show that this stability depends on several factors, particularly on the nature of the heteroatom (X) and the total charge of the cluster. In this paper, we apply the clathrate model to the Keggin molecule to carry out a fragment-interaction study to elucidate when and why the traditional relative stability of various isomers can be inverted. The fully oxidized anions that have inverted the traditional stability trend in this series are [AlW(12)O(40)](5-) and [GaW(12)O(40)](5-), both of which contain a third-group heteroatom and an overall charge of -5. beta-isomers are always more easily reduced than alpha-isomers. This experimental observation suggests that reduction favors the stability of beta-isomers and one of the most important results of this study is that the alpha/beta inversion is achieved in most cases after the second reduction. The alpha- and beta-isomers may have different properties because the energy of the LUMO, a symmetry-adapted d(xy)-metal orbital, is different.     

Effect of hydrothermal treatment on catalytic properties of superhigh-silica zeolites

The effect of hydrothermal treatment of decationized superhigh-silica zeolite on the mechanism of n-hexane conversion has been studied. It has been established that thermosteam modification sharply decreases the cracking activity and increases the selectivity to aromatization reactions. Zeolite acidity markedly decreases, but its crystal structure does not become amorphous.

---

-. . .

     

Determination of mercury in sludge and materials used for HG-eliminations from industrial waste waters by zeeman atomic absorption spectrometry after matrix modification with potassium bromide and bromine

Summary Mercury was determined by Zeeman Atomic Absorption Spectrometry after matrix modification of urine and waste water by addition of 0.1M HNO₃, 0.05M KBr, and 5l Br₂/ml, and after its extraction from sludge, iron sludge and ion exchanger by a mixture containing the same additives. The same samples were also analysed by the cold vapour method after wet oxidation of the samples in closed teflon bombs. The ratio of the corresponding concentrations was 1.21±0.39 (SD) and the concentration range covered 0.1–50000 mg Hg/kg. The analytical powers of both procedures are compared.

---

Bestimmung von Quecksilber in Schlamm und in für die Reinigung industrieller Abwässer verwendeten Materialien mit der Zeeman-Atomab-sorptions-Spektrometrie nach Matrixmodifizierung durch Kaliumbromid und Brom

Zusammenfassung Quecksilber wurde mit der Zeeman-Atomabsorptions-Spektroskopie in Urin und Abwässern nach einer Matrixmodifizierung durch Zugabe von 0,1M HNO₃, 0,05M KBr und 5 l Br₂/ml sowie nach seiner Extraktion aus Schlamm, Eisenschlamm und Ionenaustauschern mit einer Mischung der gleichen Zusatzstoffe bestimmt. Die gleichen Proben wurden auch nach der Kalt-Dampf-Methode nach dem Naßaufschluß in geschlossenen Teflonbomben analysiert. Das Verhältnis der betreffenden Konzentrationen betrug 1,21±0,39 (Standardabweichung), wobei der Konzentrationsbereich 0,1–50000 mg Hg/kg umfaßte. Die analytischen Leistungsfähigkeiten der beiden Verfahren wurden verglichen.

     

Synthesen von Heterocyclen, 122. Mitt.: Über die Reaktion des Perimidons mit aktiven Malonestern

Zusammenfassung Perimidon (1) reagiert mit monosubstit. Malonsäure-trichlorphenylestern (2) bei 250° zu 9-Hydroxy-5,7-dioxo-4,5-dihydro-7H-pyrido[1,2,3-cd]perimidinen (3), die durch saure Hydrolyse zu 10-Amino-4-hydroxy-benzo[h]carbostyrilen (4) gespalten werden.

---

Syntheses of heterocycles, CXXII: Reaction of perimidone with reactive malonates

Perimidone (1) reacts with monosubstituted 2.4.6-trichlorophenyl malonates at 250° to 9-hydroxy-5.7-dioxo-4.5-dihydro-7H-pyrido[1.2.3-cd]perimidines (3), which are cleaved by acid yielding 10-amino-4-hydroxy-benzo[h]quinolin-2-ones (4).

     

The electrocapillarity of polyacrylates

Summary The electrocapillary properties of polyacrylic acid have been studied by two methods. Exploratory measurements have been made of the effect of the polymer on the differential capacity of a mercury drop in 0.1 m sodium perchlorate. They showed that the polymer was strongly adsorbed over a wide range of potentials but that it did not appear to form a monolayer. The surface excess of polymer obtained from drop weight data showed a maximum at very low concentrations and then a decline at higher concentrations. The bulk of the work was carried out by making surface tension measurements, using a sessile mercury drop, in solutions of a fraction of polyacrylic acid (mol. wt. 7.02×10⁴) in potassium chloride at 0.01, 0.1, 0.2, and 0.5 m at 25°C.The data have been used to evaluate the surface excesses of the polymer and of the inorganic ions. The distribution of K⁺ and Cl^– in the electrical double layer and the contact adsorption of Cl^– on the mercury were very little affected by the presence of the polymer. The surface excess of polymer was always found to be greatest at low concentrations, to decrease steeply at first as the concentration was increased and then to decrease more slowly at higher concentrations.Possible explanations of this behaviour are discussed and it is concluded that the rapid decrease is a consequence of molecular weight dispersion and the stronger adsorption of high molecular weight polymer. The slow decrease in surface excess at higher concentrations may be a result of configurational changes of the polymer molecules.Surface pressure data show that, despite this decrease in the surface excess, the surface coverage reaches a high level at very low polymer concentrations and then continues to increase slowly as the concentration of polymer is increased. This apparent contradiction is due to changes in configuration of the adsorbed polymer molecules. At higher bulk concentrations the chain configurations are more compact and each adsorbed molecule makes more contacts with and so occupies a greater area of the mercury surface than at low concentrations.The conclusion is reached that the surface excess of polymer is mostly contained in a layer probably more than 1000 Å thick. It consists of a concentrated and entangled mass of polymer chains. Relatively few of these chains are in contact with the mercury at any istant. The concentration in this surface layer decreases steadily with increasing distance from the mercury surface and it merges without discontinuity into the bulk solution.With 10 figures in 22 details     

Synthesis and conversions of metallocycles. 7. A novel approach to the synthesis of 3,4-dialkyl-substituted aluminacyclopentanes in the presence of Cp2ZrCl2

A novel approach was developed for the stereoselective synthesis of trans-3,4-dialkyl-substituted aluminacyclopentanes from -olefins, metallic magnesium, and EtAlCl₂ in the presence of catalytic amounts of Cp₂ZrCl₂. The hydrolysis and deuterolysis products of the 3,4-dialkyl-substituted aluminacyclopentanes obtained are only in the trans configuration.For previous communication, see [1].Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1607–1609, July, 1991.     

Preparation and characterization of dealuminated metakaolin and its use in the transformation of waste plastics to aromatic hydrocarbons

Acid activated metakaolins (AAMKs) have been prepared by calcination of the natural clay at 600 degrees C to provide a metakolin which was then leached at 80 degrees C for 3 h using 1M, 2M, 3M, and 6M HCl. These materials were characterized and their ability to transform the off gases from HDPE decomposition into useful aromatic species was evaluated. The amount of adsorbed water and the number of acid sites increased with the severity of acid treatment. Variable temperature DRIFTS spectroscopy of pyridine treated samples revealed that both Br?nsted and Lewis acid centers were present until 425 degrees C. Pyridine bonded to the Lewis acid centers was more thermally stable. The AAMKs were all selective to the production of toluene with respectable, but lesser, amounts of xylenes and trimethylbenzenes. This selectivity contrasts with that of acid leached and pillared smectites which are selective toward trimethylbenzene.