New results for the OH (nu = 0,j = 0) + CO (nu = 0,j = 0) --> H + CO2 reaction: Five- and full-dimensional quantum dynamical study on several potential energy surfaces

Full- [six-dimensional (6-D)] and reduced-dimensional [five-dimensional (5-D)] quantum wave packet calculations have been performed for the title reaction to obtain reaction probabilities deriving from the ground rovibrational states of OH and CO with total angular momentum J = 0. Three potential energy surfaces (PES) are studied, namely, those of Bradley and Schatz (BS), Yu, Muckerman, and Sears (YMS), and Lakin, Troya, Schatz, and Harding (LTSH). 6-D calculations are performed only for the BS PES, while 5-D results are reported for all three PES'. The 6-D results obtained in the present work improve on those previously reported, since a larger vibrational basis and a better representation of the OH and CO bonds has been introduced. In particular, we now employ a generalized Lanczos-Morse discrete variable representation for both the OH and CO vibrations. In a further improvement, the generalized discrete variable representation of the CO vibration is based on different CO intramolecular potentials for the asymptotic and product grids employed in our projection formalism. This new treatment of the vibrational bases allows for a large reduction in computation time with respect to our previous implementation of the wave packet method, for a given level of accuracy. As a result, we have been able to extend the range of collision energies for which we can obtain converged 6-D results to a higher energy (0.8 eV) than was possible before (0.5 eV). The comparison of the new 6-D and previous 5-D results for the BS PES shows good agreement of the general trend in the reaction probabilities over all collision energies considered (0.1-0.8 eV), while our previous 6-D calculation showed reaction probabilities that differed from the 5-D results by up to 10% between 0.5 and 0.8 eV. The 5-D reaction probabilities reveal interesting trends for the different PES'. In particular, at low energies (< 0.2 eV) the LTSH PES gives rise to much larger reactivity than the other PES', while at high energies (> 0.3 eV) its reaction probability decreases with respect to the BS and YMS PES', being more than a factor of 2 smaller at 0.8 eV. A 5-D calculation on a modified version of the LTSH surface shows that the van der Waals interaction in the entrance channel, which is not correctly described in the other PES' is largely responsible for its larger reactivity at low energies. The large difference between the 5-D reaction probabilities for the YMS and LTSH PES' serves to emphasize the importance of the van der Waals interaction for the reactivity at low energies, because most of the stationary point energies on the YMS and LTSH PES are rather similar, being in line with high-level ab initio information.     

Sigma-pi separation of the electron localization function and aromaticity

The electron localization function (ELF) has been separated in its sigma and pi components. The topological analysis of the new ELFsigma and ELFpi functions has been used to quantify the concept of resonance. The highest bifurcation values of these functions describe in a correct way the aromaticity of classical ring molecules and some new aromatic compounds as B6CO6, Al4(2-), and N5-. In the case of Al4(2-), an important sigma delocalization contribution has been found, which is in agreement with previous interpretation.     

Hexaruthenium carbonyl cluster complexes with basal edge-bridged square pyramidal metallic skeleton: efficient synthesis of 2-imidopyridine derivatives and determination of their reactive sites in carbonyl substitution reactions

The reactions of [Ru(3)(CO)(12)] with half equivalent of 2-amino-6-methylpyridine (H(2)ampy) or 2-aminopyridine (H(2)apy) in refluxing xylene give the hexanuclear products [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-L)(mu-CO)(2)(CO)(14)] (L = ampy, 1; apy, 2). These reactions represent the first high-yield syntheses of hexanuclear complexes with a basal edge-bridged square pyramidal metallic skeleton. Five metal atoms of these complexes are bridged by the N-donor ligand in such a way that the edge-bridging metal atom is attached to the pyridine nitrogen, while the basal atoms of the square pyramid are capped by an imido fragment that arises from the activation of both N-H bonds of the NH(2) group. The reactive sites of these complexes in CO substitution reactions have been determined by studying the reactivity of 1 with triphenylphosphine. Two kinetically controlled monosubstitutions take place on the edge-bridging metal atom in positions cis to the pyridine nitrogen, leading to a mixture of two isomers of formula [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(13)(PPh(3))] (3 and 4). On heating at 80 degrees C, these monosubstituted isomers are transformed, via a dissociative pathway, into the product of thermodynamic control (5), which has the PPh(3) ligand on the apical Ru atom. The di- and trisubstituted derivatives [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(PPh(3))(2)] (6) and [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(11)(PPh(3))(3)] (7) are stepwise formed from 3-5 and PPh(3). Compound 6 has the PPh(3) ligands on the edge-bridging and apical Ru atoms, and compound 7 has an additional PPh(3) ligand on an unbridged basal Ru atom. The compound [Ru(6)(mu(3)-H)(2)(mu(5)-eta(2)-ampy)(mu-CO)(2)(CO)(12)(mu-dppm)] (8), in which a basal and the apical Ru atoms are spanned by the dppm ligand, has been isolated from the reaction of 1 with bis(diphenylphosphino)methane.     

Gamma-hydroxyalkenals are oxidatively cleaved through Michael addition of acylperoxy radicals and fragmentation of intermediate beta-hydroxyperesters

Oxidative cleavage of arachidonate (C(20)) and linoleate (C(18)) phospholipids generates truncated C(8) or C(12) gamma-hydroxyalkenal phospholipids as well as C(5) or C(9) carboxyalkanoate phospholipids, which are abundant in atherosclerotic plaques. The gamma-hydroxyalkenals promote foam cell formation by scavenger receptor CD36-mediated endocytosis. The carboxyalkanoates are potent regulators of endothelial cell functions that may promote atherogenesis. We now report an unexpected biosynthetic interconnection; the carboxyalkanoates can be generated through oxidative cleavage of the gamma-hydroxyalkenals with the loss of three carbons. This unprecedented transformation is shown to involve Michael addition of an acylperoxy radical and fragmentation of the resulting beta-hydroxyperester.     

Neutron diffraction study of [H(4)Co(4)(C(5)Me(4)Et)(4)], a tetrahedral metal cluster complex with four face-bridging hydride ligands

A single-crystal neutron diffraction analysis of the cluster complex [H(4)Co(4)(C(5)Me(4)Et)(4)] was carried out on the new quasi-Laue diffractometer VIVALDI at the Institut Laue-Langevin. The structure consists of four face-bridging hydrides attached to a tetrahedral cobalt metal core. Average distances and angles in the core of the molecule are as follows: Co-Co = 2.571(8), Co-C = 2.158(6), Co-H = 1.749(7), H.H = 2.366(9) A; Co-H-Co = 94.6(3), H-Co-H = 85.1(3) degrees. The hydride ligands are located off the Co-Co-Co planes by an average distance of 0.923(8) A. It is suggested that the dimensions of the HCo(3) fragments found in this molecule provide reasonable estimates for analogous distances and angles associated with chemisorbed H atoms situated on the 3-fold hollows of a cobalt surface. Crystallographic details: space group P2(1)/a (monoclinic); a = 21.979(2), b = 10.924(1), c = 34.406(2) A; beta = 90.81(1) degrees; Z = 8. Final agreement factor: R(F) = 0.099 for 3779 reflections [I > 2sigma(I)] collected at 20 K.     

Early reactions of light-induced protochlorophyllide and chlorophyllide transformations analyzed in vivo at room temperature with a diode array spectrofluorometer

The steps of protochlorophyllide (Pchlide) photoreduction and subsequent chlorophyllide (Chlide) transformations which occur in the seconds to minutes time-scale were studied using a diode array spectrofluorometer in dark-grown barley leaves. The intensity of the excitation light was varied between 3 and 2,500 micromol m(-2) s(-1) and a series of fluorescence spectra were recorded at room temperature in the seconds and minutes time scales. In certain experiments, 77-K emission spectra were measured with the same equipment. The high quality of the spectra allowed us to run spectral resolution studies which proved the occurrence, at room temperature, of multiple Pchlide and Chlide forms found previously in 77-K spectra. The comparison of the 77-K and room-temperature spectra showed that the fluorescence yields of the nonphotoactive 633-nm Pchlide form and of the Chlide product emitting at 678 nm were temperature independent. The fluorescence intensity of aggregated NADPH-pigment-POR complexes (photoactive 656-nm Pchlide and 693-nm Chlide forms) were strongly increased at 77 K, while that of the NADP(+)-Chlide-POR (684-686-nm Chlide form) was much less affected by temperature. Information was obtained also about the dynamics of the transformation of pigment forms in the light at different photon densities. At low light intensities, the phototransformation of the 642-644-nm Pchlide form was faster than that of the 654-656-nm form. The relative amplitudes of Gaussian components related to different Chlide forms found after exposure to a constant amount of photons strongly depended on the light intensity used. Strong quenching of all Chlide components occurred upon prolonged exposure to high intensity light. These effects are discussed by considering the interconversion processes between different forms of the pigment-protein complexes, their relative fluorescence yields and energy migration processes.     

Domino reactions of 4,5-dicyanopyridazine with dihydroheterocycles: synthetic and mechanistic features

The title pyridazine 1 was found to react with both 2,3-dihydrofuran (2) and 3,4-dihydro-2H-pyran (9) to give the tetracyclic skeletons 5-8 and the phthalonitrile 12 through the intermediates 4 and 10, respectively. A more complex mechanism was ascertained for the reaction of 1 with the pyrroline 14 which, under suitable conditions, afforded the bicyclic derivative 19 as the predominant product; selective elaborations of this species into the 5,6-dicyanoindoles 22 and 23 are reported.     

The synthesis of isoquinoline alkaloid and its related compounds using alanine derivatives as chiral auxiliaries

Chiral 1-substituted isoquinoline derivatives, which were obtained by the reaction using alanine derivatives as chiral auxiliaries, were transformed to (S)-2,3,9,10,11-pentamethoxyhomoprotoberberine (7) and a synthetic intermediate for O-methylkreysigine (9) in good yields and high stereoselectivity. The corresponding chiral allyl derivative of isoquinoline was transformed to a pyrrolidinoisoquinoline (16) in a highly enantioselective manner.     

Socket with built-in valves for the interconnection of microfluidic chips to macro constituents

This paper reports a prototype for a standard connector between a microfluidic chip and the macro world. This prototype demonstrate a fully functioning socket for a microchip to access the outside world by means of fluids, data signals and energy supply. It supports up to 10 channels for the input and output of liquids or gases, as well as compressed air or vacuum lines for pneumatic power lines. The socket has built-in valves for each flow channel. It also contains 28 pins for the connection of electrical signals and power. Built-in valves make it possible to control the flow in each channel independently. A chip ( 11.0 x 11.0 x 0.9 mm) can be mounted into or dismounted from the socket with one touch. The fluidic connectors of the socket are designed to contact vertically on the top of chip. And the electrical connectors (the spring array) of that physically support the chip and contact lead pads at the bottom of chip. No adhesives or solders are used at any contact points. The pressure limit for the connection of working fluids was 0.2 MPa and the current limit for the electrical connections was 1 A. This socket supports both serial and parallel processing applications. It exhibits great potential for developing microfluidic systems efficiently.     

A boxmodel development to study the relationships between the photo-oxidants and the particles formation in the troposphere

The model BAGS (Boxmodel for Aerosol and Gasphase Simulations) has been developed. It is composed of two major modules: the first one describes the system of the chemical reactions in the gaseous phase, the second one calculates the aerosol chemical composition and the dimensional distribution of the particles. The boxmodel has been developed with the introduction of new chemical and physical processes, not previously included, in particular the formation of Secondary Organic Aerosol. The other implemented processes are a module for the dynamic of the particle population, nucleation, coagulation and dry deposition. The last phase of the work has been a check of the BAGS capabilities by a series of tests, that have permitted to compare it with other models (MAPS and MADM). The tests in particular have concerned the aerosol water content prediction, the photochemistry, the condensation of the inorganic compounds and the formation of Secondary Organic Aerosol.