Biosorption of americium-241 by Saccharomyces cerevisiae

The biosorption of radionuclide ²⁴¹Am from solution by Saccharomyces cerevisiae (S. cerevisiae), and the effects of experimental conditions on the adsorption were investigated. The preliminary results showed thatS. cerevisiae is a very efficient biosorbent. An average of more than 99% of the total ²⁴¹Am could be removed by S. cerevisiae of 2.1 g/l (dry weight) from ²⁴¹Am solutions of 17.54–4386.0 mg/l (2.22 MBq/l–555 MBq/l) with adsorption capacities of 7.45–1880.0 mg/g biomass (dry weight) (0.94 MBq/g–237.9 MBq/g). The adsorption equilibrium was achieved within 1 hour and the optimum pH ranged 1–3. No significant differences on ²⁴¹Am adsorption were observed at 10–45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above ²⁴¹Am concentration. The relationship between concentrations and adsorption capacities of ²⁴¹Am indicated the biosorption process should be described by the Freundlich adsorption isotherm.     

Determination of inorganic cations in brine solutions by ion chromatography

The method for analysis of inorganic cations in brine solutions was developed. Ion chromatography is a well-established and accepted technique in the determination of a variety of inorganic ions. However, there are significant complications when ion chromatography is used to determine trace concentrations of inorganic ions in brine matrices. The brine solution in our study was made to simulate the solution from the Waste Isolation Pilot Plant. Instrumental parameters such as eluent composition, flow-rates, and sample loop volumes were investigated to arrive at the optimum condition for the determination of the cations with minimal dilution. Separation was carried out in a Dionex CG12A/CS12A with 8.25 mM H2SO4 as eluent at 1.2 ml/min flow-rate. Our results indicated that ion chromatography is an accurate and a good alternative method for the analysis of cations in brine solution.     

A novel support with artificially created recognition for the selective removal of proteins and for affinity chromatography

Summary Acrylamide and N,N-methylenebisacrylamide were copolymerized in the presence of a protein to form a gel which was pressed through a sieve. The gel particles obtained were packed into a chromatographic tube. The experimental conditions for the polymerization are such that the pores of the gel particles are large enough to permit the protein to diffuse out of the particles, so that the entrapped protein can be removed from the bed by washing with an aqueous solution. However the interaction with the matrix is so strong that the protein can be desorbed only by a buffer containing 0.5 M sodium chloride or by a 10% solution of acetic acid containing 10% SDS. When a sample containing the protein present during the polymerization was applied to the column along with other proteins this protein was the only one adsorbed. The technique worked selectively with hemoglobin, cytochrome C and transferrin.     

Fe(II) in different macrocycles: electronic structures and properties

A theoretical comparative study of complexes of porphyrin (P), porphyrazine (Pz), phthalocyanine (Pc), porphycene (Pn), dibenzoporphycene (DBPn), and hemiporphyrazine (HPz) with iron (Fe) has been carried out using a density functional theory (DFT) method. The difference in the core size and shape of the macrocycle has a substantial effect on the electronic structure and properties of the overall system. The ground states of FeP and FePc were identified to be the 3A2g [(d(xy))2(d(z)2)2(d(pi))2] state, followed by 3E(g) [(d(xy))2(d(z)2)1(d(pi))3]. For FePz, however, the 3E(g)-3A2g energy gap of 0.02 eV may be too small to distinguish between the ground and excited states. When the symmetry of the macrocycle is reduced from D4h to D2h, the degeneracy of the d(pi) (d(xz), d(yz)) orbitals is removed, and the ground state becomes 3B2g [(d(xy))2(d(z)2)1(d(yz))2(d(xz))1] or 3B3g [...(d(yz))1(d(xz))2] for FePn, FeDBPn, and FeHPz. The calculations also show how the change of the macrocycle can influence the axial ligand coordination of pyridine (Py) and CO to the Fe(II) complexes. Finally, the electronic structures of the mono- and dipositive and -negative ions for all the unligated and ligated iron macrocycles were elucidated, which is important for understanding the redox properties of these compounds. The differences in the observed electrochemical (oxidation and reduction) properties between metal porphycenes (MPn) and metal porphyrins (MP) can be accounted for by the calculated results (orbital energy level diagrams, ionization potentials, and electron affinities).     

LiM2(NCN)Br3 (M = Sr,Eu): Synthesis and Crystal Structures of Solid‐State Carbodiimides with Empty Tetrahedral Metal Entities

Two solid‐state carbodiimide compounds, LiM₂(NCN)Br₃ (M = Sr, Eu), with characteristic empty tetrahedral M₄ entities have been synthesized using a flux route, and their structures were determined by single‐crystal X‐ray diffraction. The new phases LiSr₂(NCN)Br₃ and LiEu₂(NCN)Br₃ are isotypical with the corresponding iodides and crystallize in the cubic system (( , Z = 16) but with smaller unit cells (a = 14.641(1) Å for LiSr₂(NCN)Br₃ and 14.572(1) Å for LiEu₂(NCN)Br₃). The extended structures comprise two interpenetrating three‐dimensional networks: the first one is built from isolated M₄ tetrahedra capped by NCN^2? anions on their triangular faces while the second is made from vertex‐sharing LiBr₆ octahedra. The linear NCN^2? anions exhibit the symmetrical carbodiimide shape and serve as linkers between the tetrahedral entities.     

Trace perchlorates in a radiological liquid-waste treatment facility

Waste management programs at the Radioactive Liquid Waste Treatment Facility (RLWTF) at the Los Alamos National Laboratory (LANL) are concerned with the levels of perchlorates due to the effects it can have on the environment and resultant regulations. The RLWTF treats industrial and radioactive wastes generated at multiple research and production facilities across the LANL. Perchloric acid is the major source of the perchlorate ion in the RLWTF used in the analytical chemistry laboratories and for metal dissolution. Perchlorate is present in the influent to the RLWTF at concentrations up to several thousands microg/l level. Ion chromatography is the method of choice to analyze the concentrations of perchlorate in the wastewater generated at the RLWTF. Perchlorate was separated by elution through a CS16/CG16 with an EG40 eluent generator. To minimize background conductivity and enhance analyte conductance, an anion self-regenerating suppressor was used. The method achieved a perchlorate method detection limit of 1 microg/l. The method is successfully being used to monitor the perchlorate levels at the RLWTF and provide data for the pilot tests to remove perchlorate from the RLWTF effluent.     

The spontaneous release of a high-molecular-weight aggregate containing immunoglobulin G from the surface of Ehrlich ascites tumor cells

The spontaneous release of tumor cell antigens from the cell surface into the circulation has been proposed as a mechanism whereby tumors may escape the immune response of the host. In this study we have found that Ehrlich ascites tumor cells after removal from the host (mouse) spontaneously release significant amounts of cell surface components during incubation for 1 h in cold isotonic buffer. Immunodiffusion studies revealed that immunoglobulin G (IgG) and a complement component (C3) are included in this spontaneously released material. These surface-bound humoral immune components are apparently released in the form of a high-molecular-weight aggregate (cell coat particle) as shown by ultracentrifugation and ultrafiltration experiments. Precipitation of IgG from the cell coat particle preparation with antibodies directed against mouse IgG followed by detergent gel electrophoresis of the immune precipitate revealed five major bands in addition to the heavy and light chains of IgG. These results suggest that host IgG is tightly bound to several other components at the cell surface, perhaps in the form of immune complexes. IgG is localized on the tumor cell surface in a highly heterogenous pattern with the appearance of patches and caps in some cells as shown by immunofluorescence analysis. The possibility that humoral immune components bind to the tumor cell surface and result in the shedding of high-molecular-weight aggregates of cell surface antigens into extracellular fluids is discussed.     

Effects of soluble surfactants on the deformation and breakup of stretching liquid bridges

Surfactants are routinely used to control the breakup of drops and jets in many applications such as inkjet printing, crop spraying, and DNA or protein microarraying. The breakup of surfactant-free drops and jets has been extensively studied. By contrast, little is known about the closely related problem of interface rupture when surfactants are present. Solutions of a nonionic surfactant, pentaethylene glycol monododecyl ether, or C12E5, in water and in 90 wt % glycerol/water are used to show the effects of surfactant and viscosity on the deformation and breakup dynamics of stretching liquid bridges. Equilibrium surface tensions for both solutions can be fitted with the Langmuir-Szyskowski equation. All experiments have been done at 24 degrees C. The critical micelle concentrations for C12E5 are 0.04 and 0.4 mM in water and the glycerol/water solution, respectively. With high-speed imaging, the dynamic shapes of bridges held captive between two rods of 3.15 mm diameter are captured and analyzed with a time resolution of 0.1-1 ms. The bridge lengths are 3.15 mm initially and about 5-7 mm at pinch-off. Breakup occurs after stretching for about 0.2-0.3 s, depending on the solution viscosity and the surfactant concentration. When the liquid bridges break up, the volume of the sessile drop left on the bottom rod is about 3 times larger than that of the pendant drop left on the top rod. This asymmetry is due to gravity and is influenced by the equilibrium surface tensions. Surfactant-containing low-viscosity water bridges are shown to break up faster than surfactant-free ones because of the effect of gravity. With or without surfactant, water bridges form satellite drops. Surfactant-containing high-viscosity glycerol/water bridges break up more slowly than surfactant-free ones because of strong viscous effects. Moreover, the shapes of the sessile drops close to breakup exhibit a "pear-like" tip; whether a satellite forms depends on the surface age of the bridge before stretching commences. These unexpected effects arising from the addition of surfactants are due to the capillary pressure reduction and Marangoni flows linked to dynamic surface tension.     

The effect of phenyl substituents on the release rates of esterase-sensitive coumarin-based prodrugs

A coumarin-based prodrug system has been recently developed in our laboratory for the preparation of esterase-sensitive prodrugs of amines, peptides, and peptidomimetics. The drug release rates from this prodrug system were found to be dependent on the structural features of the drug moiety. In certain cases, the release can be undesirably slow for drugs that are secondary amines with relatively high pKa's. Aimed at finding ways to manipulate the release rates to suit the need of different drugs, we have examined the effect of the phenyl ring substitutions on the release kinetics of such prodrugs and found that appropriately positioned alkyl substituents on the phenyl ring could help to facilitate the release by as much as 16-fold. Therefore, introduction of alkyl substituents on the phenyl ring should allow us to manipulate the release rates and, therefore, time profiles for different drugs.     

Synthesis of PNIPAAm-g-P4VP Microgel as Draw Agent in Forward Osmosis by RAFT Polymerization and Reverse Suspension Polymerization to Improve Water Flux

Microgels have unique and versatile properties allowing their use in forward osmosis areas as a draw agent. In this contribution, poly(4-vinylpyridine) (P4VP) was synthesized via RAFT polymerization and then grafted to a poly(N-Isopropylacrylamide) (PNIPAAm) crosslinking network by reverse suspension polymerization. P4VP was successfully obtained by the quasiliving polymerization with the result of nuclear magnetic resonance and gel permeation chromatography characterization. The particle size and particle size distribution of the PNIPAAm-g-P4VP microgels containing 0, 5, 10, 15 and 20 wt% P4VP were measured by means of a laser particle size analyzer. It was found that all the microgels were of micrometer scale and the particle size was increased with the P4VP load. Inter/intra-molecular-specific interactions, i.e., hydrogen bond interactions were then investigated by Fourier infrared spectroscopy. In addition, the water flux measurements showed that all the PNIPAAm-g-P4VP microgels can draw water more effectively than a blank PNIPAAm microgel. For the copolymer microgel incorporating 20 wt% P4VP, the water flux was measured to be 7.48 L∙m⁻²∙h⁻¹.