Laser-induced fluorescence imaging of subsurface tissue structures with a volume holographic spatial-spectral imaging system

A three-dimensional imaging system incorporating multiplexed holographic gratings to visualize fluorescence tissue structures is presented. Holographic gratings formed in volume recording materials such as a phenanthrenquinone poly(methyl methacrylate) photopolymer have narrowband angular and spectral transmittance filtering properties that enable obtaining spatial-spectral information within an object. We demonstrate this imaging system's ability to obtain multiple depth-resolved fluorescence images simultaneously.     

基于电流变液的可调谐负磁导率材料

通过把负磁导率材料SRR阵列置于高性能电流变液中,研究了电极加载方式、电流变液浓度、电流变液类型以及电场强度等因素对浸入电流变液中的SRR阵列谐振频率的影响. 实验表明,电极加载方式对SRR阵列的磁响应有重要的影响;在容器盒中充满电流变液之后SRR阵列的谐振频率往低频发生了移动,并且可以通过改变外加电场强度来调节,最大的调节范围为130MHz. 数值计算结果表明SRR阵列的有效磁导率在谐振频率附近为负值,并且有效磁导率为负的频率范围也可以通过改变外加电场强度来调节. 关键词： 负磁导率材料 谐振频率 电流变液     

密立根油滴实验数据的计算机处理

本文主要给出了利用VB编制的处理密立根油滴实验数据的程序,解决了数据处理的复杂计算的问题,利用该程序软件处理测定的电子电量值与标称值符合得较好,使该实验可以作为综合实验安排．     

Diffraction detection of sucrose by electrophoresis in a microfluidic chip

Based on the change of diffraction pattern, a microfluidic chip electrophoresis detection system is developed. Using tris(hydroxymethyl)aminomethane (Tris) of 10 mmol/l as buffer and sucrose solutions (with concentration of 0.054, 0.1725, 0.24775 and 0.2975 g/ml respectively) as samples, quantity as tiny as 55 pl (pico-liter) of sucrose solution in the microfluidic chip (with a channel diameter of 60 μm) is detected successfully with an unfocused He-Ne laser beam (633 nm, 1 mW). The experiment is simple and the detection result is obvious. PACS  42.25.Fx; 82.45.h; 42.66.Lc     

激光导星共孔径发射接收的偏振分光效率研究

在地平式折轴望远镜上开展自适应光学瑞利激光导星实验,研究了信标光束同孔径发射和接收偏振分光技术。基于镜面膜层复振幅反射特性,采用琼斯矩阵描述方法,建立了偏振分光物理模型,研究了共孔径发射和接收偏振耦合分光的效率问题,并与实验结果进行了比较。结果表明,由于镜面膜层对s光和p光的相位延迟差异,系统偏振分光效率随着望远镜的方位角旋转会发生周期性的变化,同时也受望远镜天顶角变化的影响。在研究光路反射镜相位延迟对往返分光效率影响规律的基础上,提出了提高地平式折轴望远镜激光导星共孔径发射和接收偏振分光效率,消除受望远镜方位角和天顶角变化影响的技术途径。     

用PM3量化参数预测多氯代二苯并呋喃的logKow

从现有的PCDFs分子的正辛醇 /水分配系数 (logKow)实验数据出发 ,建立定量结构 性质关系方程(QSPR) .采用G98W程序包中的PM3方法对 13 5个多氯代二苯并呋喃 (PCDFs)分子和二苯并呋喃进行了优化计算 ,作业命令为 #pPM3optfreqscf(conver =9) ,以计算所得的分子轨道能量、碳原子电荷作为PCDFs分子结构描述符 ,运用多元线性回归技术建立了PCDFs的logKow与分子结构描述符的四元方程 ,最优相关系数为 0 .95 0 7,标准偏差为 0 .173 7,经检验该模型的稳健性好 ,并对未有实验数据的 85个PCDFs的logKow进行预测     

Wide-angle beam splitting by use of positive-negative refraction in photonic crystals

We present a positive-negative refraction effect in which, under certain conditions, an incident plane wave launched into a photonic crystal excites a positive-refracted Bloch wave and a negative-refracted Bloch wave simultaneously, both of which maintain the polarization. By utilizing this phenomenon, wide-angle beam splitting can be realized at the microscale level. Numerical simulations are employed to demonstrate this anomalous refraction behavior.     

A Strong Regularity Result for Parabolic Equations

We consider a parabolic equation with a drift term u+bu–u _t =0. Under the condition div b=0, we prove that solutions possess dramatically better regularity than those provided by standard theory. For example, we prove continuity of solutions when not even boundedness is expected.     

3,7-二硝基亚氨基-2,4-二氮杂双环[3,3,0]辛烷的放热分解反应动力学

在程序升温条件下 ,用DSC研究了标题化合物的放热分解反应动力学 .用线性最小二乘法、迭代法以及二分法与最小二乘法相结合的方法 ,以积分方程、微分方程和放热速率方程拟合DSC数据 .在逻辑选择建立了微分和积分机理函数的最可几一般表达式后 ,用放热速率方程得到相应的表观活化能 (Ea)、指前因子 (A)和反应级数 (n)的值 .结果表明 :该反应的微分形式的经验动力学模式函数、Ea 和A值分别为 (1-α) 0 .44、2 30 .4kJ/mol和 10 18.16s-1.借助加热速率和所得动力学参数值 ,提出了标题化合物放热分解反应的动力学方程 .该化合物的热爆炸临界温度为 30 2 .6℃ .上述动力学参数对分析、评价标题化合物的稳定性和热变化规律十分有用 .     

Determination of q=1 surface by the variation of pellet ablation rate on the HL-1M

Strong drop of Hα emission has been observed on the HL-1M tokamak by means of a detector array while a pellet crosses the q=1 surface. In this article, the q=1 surface has been determined precisely by the interval and the shape of the Hα emission striations on the pellet trajectory due to the variation of pellet ablation rate. The q-profile and current density distribution at the plasma centre region have been calculated according to the pellet ablation rate and the magnetic shear feature.