苹果盛果期冠层高光谱与其组分特征的定量模型研究

从分析苹果树盛果期冠层高光谱入手,结合同一时间的数码照片,在Erdas,ViewSpec Pro,DPS和LIBSVM等软件的支持下,采用相关分析、线性回归、逐步回归、基于BP人工神经网络分析、支持向量机回归方法,探析高光谱反射率及其转换数据与冠层组分指数间的关系。结果表明,冠层反射率受地表反光膜的影响显著;原始反射率与果叶比的相关性最好,611~680 nm为反映两者关系的特征波段;在特征波段内,依据原始反射率和果叶比所建立的4种模型都可满足预测需要,但基于BP人工神经网络模型和支持向量机回归模型整体上优于一元线性回归模型和多元线性回归模型,尤以支持向量机回归模型精度最高。研究结果可为后续的苹果遥感估产工作提供理论支持。     

NS-乙酸酐法制备TBSI及其光谱分析

研究采用乙酸酐为溶剂,NS-乙酸酐法制备N-叔丁基-双(2-苯并噻唑)次磺酰胺(TBSI),通过FTIR,XRD,UV-Vis和TG-DTA对其进行检测和表征,揭示出TBSI的微观结构和内在规律性。FTIR揭示了TBSI分子内部各元素之间的化学键键型。XRD从晶胞参数、晶面指数等晶体学数据,变换出TBSI晶体微观结构,完成TBSI物相组成和结构的定性鉴定。UV-Vis检测出了TBSI在228.3,281.3和298.3 nm有三个吸收峰,分别为TBSI分子中的n→σ*,π→π*,n→π*的电子跃迁产生的,为企业TBSI产品质量检测,提供了基础数据。TG-DTA检测出TBSI的质量变化与热效应两种信息,DSC曲线在46.5,188.9和368.5 ℃分别出现了吸收峰,46.5 ℃吸收峰是样品残留少许溶剂的挥发产生的,188.9和368.5 ℃分别为相变峰和分解峰,TBSI分解温度偏高,为采用硫化仪研究TBSI的橡胶硫化性能提供参考。研究为企业选定工作标准品,对TBSI工业化生产进行跟踪检测,评判TBSI的产品性能指标,填报立项TBSI化工行业标准的申报,撰写标准草案提供基础实验数据。     

LD-pumped passively Q-switched Nd:YVO4 infrared and green lasers

A laser diode directly end-pumped, passively Q-switched Nd:YVO₄/Cr:YAG laser is presented in this paper. With 600 mW incident pump laser, Q-switched 1064 nm laser with an average power of 138 mW, pulse width of 19.8 ns, repetition rate of 170.1 kHz and peak power of 40.96 W is obtained. When a KTP crystal was inserted into the cavity, Q-switched 532 nm laser with an average power of 56 mW, pulse width of 28.4 ns, repetition rate of 118.2 kHz and peak power of 16.7 W is obtained at last.     

Experimental investigation of the two-photon widths of the chi(c0) and the chi(c2) mesons

Using 12.7 fb(-1) of data collected with the CLEO detector at CESR, we observed two-photon production of the cc states chi(c0) and chi(c2) in their decay to pi(+)pi(-)pi(+)pi(-). We measured gamma(gammagamma)(chi(c))xB(chi(c)-->pi(+)pi(-)pi(+)pi(-)) to be 75+/-13(stat)+/-8(syst) eV for the chi(c0) and 6.4+/-1.8(stat)+/-0.8(syst) eV for the chi(c2), implying gamma(gammagamma)(chi(c0)) = 3.76+/-0.65(stat)+/-0.41(syst)+/-1.69(br) keV and gamma(gammagamma)(chi(c2)) = 0.53+/-0.15(stat)+/-0.06(syst)+/-0.22(br) keV. Also, cancellation of dominant experimental and theoretical uncertainties permits a precise comparison of gamma(gammagamma)(chi(c0))/gamma(gammagamma)(chi(c2)), evaluated to be 7.4+/-2.4(stat)+/-0.5(syst)+/-0.9(br), with QCD-based predictions.     

用数字干涉仪测量变形镜影响函数的实验研究

分析了变形反射镜面形影响函数的意义，鉴于自适应光学系统中波前探测大都以测量波前斜率为基础的特点，提出应研究斜率影响函数，并在此基础上构成波前复原矩阵。还介绍了用数字干涉仪测量变形镜影响函数的方法和结果，并对测量结果进行了分析，得到了影响函数的各种参数，例如：交连值，高斯指数，特征宽度等。并将干涉法测量斜率影响函数的结果与实际的哈特探测器的测试结果进行了比较。     

Large area bolometers for millimeter-wave power calibration

An accurate monolithic power meter has been developed for millimeter-wave applications. The detector is a large-area Bismuth bolometer, integrated on a fused-Quartz substrate. It simply measures the temperature change caused by the absorption of millimeter-wave radiation. The power meter is simple to fabricate, inexpensive, and can be easily calibrated using a low-frequency network. The measured responsivity for a 50 bolometer, with an area of 1×1cm, at a bias of 1V. and a video modulation of 100Hz, is 1mV/W. The noise spectrum exhibits a 1/f rolloff till 1KHz, and is limited by the Johnson noise for higher frequencies. The NEP of the detector is 3WHz^–1/2 at a video modulation of 1KHz. It is possible to decrease the current NEP by fabricating bolometers with higher responsivities. Possible application areas are absolute power calibration and localized power density measurements at millimeter and submillimeter wavelengths.     

Doppler-broadening measurements of microvoids at the Au/GaAs interface

Recent positron lifetime studies made on the Au/GaAs interface with an applied electric field returning a significant fraction of bulk implanted positrons to the interface have revealed the presence of microvoids( 1 nm diameter) at the interface. In this work an attempt has been made to study these microvoids by observing the Doppler broadening on the annihilation radiation coming from them. This is done both by observing theS-parameter as a function of applied bias and by applying the generalized least-squares method to the deconvolution of the annihilation radiation lineshape. The general conclusion is that the Doppler-broadened data are consistent with the majority of positrons trapping into microvoids, probably associated with grain boundaries. The data suggest that these open volume defects are more associated with the Au film rather than the Au-Ga alloyed interfacial region.Paper presented at the 132nd WE-Heraeus-Seminar on Positron Studies of Semiconductor Defects, Halle, Germany, 29 August to 2 September 1994     

电容温度传感器的实验研究

从液氮温度到水的沸点温度范围内,测量了介质分别为钽,涤纶,陶瓷,玻璃釉和陶瓷独石一体化结构的商用固体电容器的电容量-温度之间的关系.拟合测量结果表明,独石陶瓷电容器在正温度段具有较好的线性响应(-10pF/℃),灵敏度(0.1 ℃)和精确度(标准差为0.016);而涤纶电容器在负温度段的特性较好( 17pF/℃,0.06 ℃和0.01).此外,在约0.5特斯拉的恒定磁场作用下,无论在正或负温度段,上述测得的电容量-温度关系几乎不受影响.因此,本研究对开发抗强电磁场,自加热效应小或导热系数小的低温测温器具有较大的参考价值.     

Two matrix algorithms for eigenmodes of a Bessel-Gauss resonator

A Bessel-Gauss resonator (BGR) was proposed to produce the Bessel Gauss beams. In this paper transverse profiles and their corresponding losses of the BGR are computed by use of the entire matrix formalism and the transfer matrix method, and the computation results from two algorithms are compared. The computation results show that for the BGR there is no inconsistence in the mode fields yielded by two methods, and the transfer matrix methods are more accurate in the mode losses than the entire matrix formalism, which lead to a believable conclusion that the BGR with a convex-spherical mirror easily produces the fundamental Bessel-Gauss mode of good quality.     

Effect of Surface Structure of Nano-CaCO3 Particles on Mechanical and Rheological Properties of PVC Composites

To study the effect of different surface structures on resultant mechanical and rheological properties, nano-CaCO₃ particles were treated with isopropyl tri-stearyl titanate (H928), isopropyl tri-(dodecylbenz-enesulfonyl) titanate (JN198), and isopropyl tri-(dioctylpyrophosphato) titanate (JN114). Scanning electron microscopy (SEM) and dynamic mechanic analysis (DMA), carried out to characterize the effective interfacial interaction between the nano-CaCO₃ particles and a poly(vinyl chloride) (PVC) matrix, indicated that JN114 treated nano-CaCO₃ particles had the strongest interfacial interaction with a PVC matrix, while H928 treated nano-CaCO₃ had the weakest. The rheological and mechanical properties of PVC/nano-CaCO₃ composites were investigated as a function of surface structure and filler volume fraction. The tensile yield stress and elongation at break decreased with the increasing of calcium carbonate content while tensile modulus increased. PVC filled with JN114 treated nano-CaCO₃ had the highest tensile modulus and tensile yield stress, while those filled with H928 treated nano-CaCO₃ had the highest elongation at break at the same filler content. The impact strength of PVC/nano-CaCO₃ composites increased with the increasing of CaCO₃ content, and PVC composites filled with JN198 treated nano-CaCO₃ particle had a higher impact strength than those with JN114 or H928 treated, with the value reaching 23.9 ± 0.7 kJ/m² at 11 vol% CaCO₃, four times as high as that of pure PVC. Rheological properties indicated that a suitable interfacial interaction and a good dispersion of inorganic filler in a PVC matrix could reduce the viscosity of PVC/nano-CaCO₃ composites. The interfacial interaction was quantitatively characterized by semiempirical parameters calculated from the tensile strength of PVC/nano-CaCO₃ composites to confirm the results from the SEM and DMA experiments.